ProLiant DL380 Gen10 Plus Server

QuickSpecs
HPE ProLiant DL380 Gen10 Plus Server
Configuration Information
Page 20
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales
representative for information on configurable product offerings and requirements.
• Factory Integrated Models must start with a CTO Server.
• FIO indicates that this option is only available as a factory installable option.
• All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
• Some options may not be integrated at the factory. Contact your local sales representative for additional information.
Step 1: Base Configuration
(choose one (1) of the following four (4) configurable server models from the tables below)
The below (4) CTO server models denoted with “NC” in the SKU description, provide flexibility in the ne
tworking choice and require
a network adapter from the “HPE Networking” section be selected.
Networking Choice CTO
Server Models
HPE ProLiant DL380
Gen10 Plus 8LFF
NC CTO Server
HPE ProLiant DL380
Gen10 Plus 12LFF
NC CTO Server
HPE ProLiant DL380
Gen10 Plus 8SFF
NC CTO Server
HPE ProLiant DL380
Gen10 Plus 24SFF
NC CTO Server
SKU Number
P05175-B21
P05174-B21
P05172-B21
P05173-B21
HPE Trusted Supply Chain
P36394-B21 – Optional
Processor
Not included as
standard
Not included as
standard
Not included as
standard
Not included as
standard
DIMM Slots
32-DIMM slots
32-DIMM slots
32-DIMM slots
32-DIMM slots
Storage Controller
Embedded SW RAID with 14 SATA ports (12-ports accessible), choice of HPE modular Smart
Array and PCIe plug-in controller
PCIe
Three standard in primary riser
Drive Cage - included
8 LFF
12 LFF
8 SFF
24 SFF
Network Controller
Choice of either OCP 3.0 or select stand-up network adapters for primary networking selection
plus additional/optional stand-up network adapters
Notes: No embedded networking
Fans
6-Standard
6-Performance
4-Standard
6-Performance
Management
HPE iLO with Intelligent Provisioning (standard), iLO Advances and OneView (optional)
USB
1x 3.0 standard plus
iLo front service port
None as standard
1x 3.0 standard plus
iLo front service port
1x 3.0 standard plus
iLo front service port
Notes:
- Network Choice (NC) server models require a networking selection of a network adapters in the “HPE Networking” section.
- HPE Trusted Supply Chain (P36394-B21) is an optional security upgrade intended for agencies and regulated industries
needing enhanced security and compliance needs. Applying this option to a DL380 Gen10 Plus CTO server ensures it is
built in the USA in a secured facility by vetted HPE personnel assigned to the manufacturing processes. A multitude of
checkpoints/inspections for malicious microcode and counterfeit parts are performed throughout the server build, and
additional safeguards are put in place against cyber-exploits throughout the server lifecycle. The HPE ProLiant DL380
Gen10 Plus Server is re-branded as a HPE ProLiant DL380T Gen10 Plus to denote the HPE Trusted Supply Chain security
enhancements. The DL380T Gen10 Plus is currently supported in the USA, exclusively, and is Trade Agreement Act (TAA)
compliant. See “HPE Security” section within this document for more detail and learn more
at http://www.hpe.com/security
- HPE offers multiple Trade Agreement Act (TAA) compliant configurations to meet the needs of US Federal Government
customers. These products are either manufactured or substantially transformed in a designated country. TAA compliance
is only provided when HPE options are included as part of factory integrated orders (CTO).
-
All CTO servers are Energy Star 3.0 compliant.