ProLiant DL380 Gen10 Plus Server

QuickSpecs
HPE ProLiant DL380 Gen10 Plus Server
Configuration Information
Page 23
•
-Qty. 2 PMEM requires Qty.= 12 RDIMMs or LRDIMMs
• -Qty. 4 PMEM requires Qty.= 4 or 8 RDIMMs or LRDIMMs
• -Qty. 8 PMEM requires Qty.= 8 RDIMMs or LRDIMMs
o For 2P Configuration:
• -Qty. 2 PMEM requires Qty.= 12 or 16 RDIMMs or LRDIMMs
• -Qty. 4 PMEM requires Qty.= 24 RDIMMs or LRDIMMs
• -Qty. 8 PMEM requires Qty.= 8 or 16 RDIMMs or LRDIMMs
• -Qty. 16 PMEM requires Qty.= 16 RDIMMs or LRDIMMs
- Additional Intel Optane Persistent
Memory for HPE(PMEM) cannot be selected beyond the provided configurations above.
- Additional HPE Smart Memory kits (RDIMM or LRDIMM) cannot be selected beyond the provided configurations above.
- For information regarding Intel Optane Persistent Memory for HPE
visit:
http://www.hpe.com/info/persistentmemory
Memory Blank Kit
HPE DDR4 DIMM Blank Kit
P07818-B21
Notes: Qty 1 of DIMM Blank kit (P07818-B21) Required only when configuration includes the population of a mid tray
kit (P26919-B21 or P27193-B21 or P39769-B21) and memory quantity is less than 32.
Step 2c: Choose Power Supplies
Select one or two power supplies from below.
Notes:
Mixing of 2 different power supplies is NOT allowed.
HPE Flex Slot Power Supplies
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
P38997-B21
HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit
865438-B21
HPE 1600W Flex Slot -48VDC Hot Plug Power Supply Kit
P17023-B21
HPE 1600W -48VDC Power Cable Lug Kit
P36877-B21
HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit
865428-B21
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
P38995-B21
HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit
865434-B21
Notes:
− Select a minimum (1), maximum (2) power supplies.
− 1600W Power supplies only support high line voltage (200VAC to 240VAC).
− Prior to making a
power supply selection it is highly recommended that the HPE Power Advisor is run to
determine the right size power supply for your server configuration. The HPE Power Advisor is located at:
http://www.hpe.com/info/hppoweradvisor.
− All power supplies in a server should match. Mixing Power Supplies is not supported.
− HPE ProLiant servers ship with an IEC-IEC power cord used for rack mounting with Power Distribution
Units (PDUs). Visit HPE power cords for a full list of optional power cords.
Step 3: Choose Additional Factory Integratable Options
One of the following from each list may be selected if desired at time of factory integration
HPE Security Options
HPE iLO Common Password FIO Setting
P08040-B21
Notes:
- Replaces iLO default randomized password by an HPE defined common password. HPE highly
recommends changing this password immediately after the initial onboarding process.
- Customers who want to choose their own custom iLO default password should use the HPE Factory
Express Integration Services