ProLiant DL380 Gen10 Plus Server

QuickSpecs
HPE ProLiant DL380 Gen10 Plus Server
Configuration Information
Page 25
- If RAID is selected on NVMe drives without Tri Mode controllers then SR100i mode must selected, and
RAID 0, 1 levels are allowed.
HPE RAID 5 Drive 1 FIO Setting
339779-B21
Notes:
- If Embedded SATA controller (with SR100i Setting (P28417-
B21)) is the primary controller, then RAID 0,
1, 5 are allowed.
- If E208i-a/E208i-p is the primary controller, then RAID 0, 1, 5 levels are allowed.
HPE Raid 5 w/SP Drive 1 FIO Setting
339780-B21
HPE RAID FIO Advanced Data Guarding Option
339781-B21
HPE Customer Defined RAID Setting Service
389692-B21
Notes:A Customer Intent Document detailing desired RAID configuration is required.
HPE ProLiant DL380 Gen10 Plus 8NVMe Balanced FIO Bundle Kit
P37046-B21
Notes:
- If this option is selected then following items must be selected in the config:
o Qty 1 of HPE DL38X Gen10+ 8NVMe CPU1/2 Cbl Kit (P22829-B21)
o Qty 1 of HPE DL38X Gen10+ High Perf Fan Kit (P14608-B21)
o Qty 1 of HPE DL380 Gen10 Plus 8SFF U.3Prem Kit (P26931-B21) or Qty 1 of HPE DL300 Gen10+
2U 8SFF x4 NVMe U.2 Kit (P26932-B21)
− Requires selection of Second Processor
HPE ProLiant DL380 Gen10 Plus 24NVMe Balanced FIO Bundle Kit
P19359-B21
Notes:
- If this option is selected then following items must be selected in the config:
o Qty 1 of HPE DL38X Gen10+ 8NVMe CPU1/2 Cbl Kit (P22829-B21)
o Qty 1 of HPE DL380 G10P x16 2pt 4SFF NVMe Pri Rsr (P27090-B21)
o Qty 1 of HPE DL380 G10P x16 2pt 4SFF NVMe Pri Rsr (P27089-B21)
o Qty 1 of HPE DL380 Gen10 Plus 2-port 4SFF Ter Rsr (P27093-B21)
o Qty 1 of HPE DL38X Gen10+ AROC NVMe Adpt Kit (P14602-B21)
o Qty 1 of HPE DL380 Gen10 OCP NVMe Adptr Kit (P27094-B21)
o Qty 1 of HPE DL38X Gen10+ High Perf Fan Kit (P14608-B21)
o Qty 3 of HPE DL380 Gen10 Plus 8SFF U.3Prem Kit (P26931-B21) or Qty 3 of HPE DL300 Gen10+
2U 8SFF x4 NVMe U.2 Kit (P26932-B21)
− Requires selection of second Processor
- DL38x G10P Box3 Removal Special Instr (873763-B21) must be selected along with this option.
HPE ProLiant DL380 Gen10 Plus 8NVMe 1P Balanced FIO Bundle Kit
P20616-B21
Notes:
- If this option is selected then following items must be selected in the config:
o Qty 1 of HPE DL380 G10P x16 2pt 4SFF NVMe Pri Rsr (P27090-B21)
o Qty 1 of HPE DL38X Gen10+ High Perf Fan Kit (P14608-B21)
o Qty 1 of HPE DL380 Gen10 Plus 8SFF U.3Prem Kit (P26931-B21) or Qty 1 of HPE DL300 Gen10+
2U 8SFF x4 NVMe U.2 Kit (P26932-B21)
HPE ProLiant DL380 Gen10 Plus 8NVMe 2P Balanced FIO Bundle Kit
P20617-B21
Notes:
- If this option is selected then following items must be selected in the config:
o Qty 1 of HPE DL380 G10P x16 2pt 4SFF NVMe Sec Rsr (P27089-B21)
o Qty 1 of HPE DL38X Gen10+ High Perf Fan Kit (P14608-B21)
o Qty 1 of HPE DL380 Gen10 Plus 8SFF U.3Prem Kit (P26931-B21) or Qty 1 of HPE DL300 Gen10+
2U 8SFF x4 NVMe U.2 Kit (P26932-B21)
o Qty 1 of 8NVMe 1P Bal FIO Kit (P20616-B21)
− Requires selection of Second Processor