ProLiant DL380 Gen10 Plus Server

QuickSpecs
HPE ProLiant DL380 Gen10 Plus Server
Core Options
Page 29
HPE ProLiant DL300 Gen10 Plus 2U 8SFF x1 Tri-Mode 24G U.3 BC Front Drive Cage Kit
P27194-B21
Notes:
-
Can be selected only with 8SFF Model X.
-
If Max Qty=3 of the 8SFF U.3Prem Kit (P26931-B21) OR 8SFF U.2Prem Kit (P26932-B21) OR 8SFF U.3
Basic Kit (P27194-B21) is selected then
o DL38x G10P Box3 Removal Special Instr (873763-B21) must be selected
o Universal Media Bay (P14609-B21) CAN NOT be selected
-
If Max Qty=2 of the 8SFF U.3Prem Kit (P26931-B21) OR 8SFF U.2Prem Kit (P26932-B21) OR 8SFF U.3
Basic Kit (P27194-B21) ordered, then the Universal Media Bay (P14609-B21) can be selected only if
DL38x G10P Box3 Removal Special Instr (873763-B21) is selected.
-
Requires selection of Tri Mode Controller (Refer Controller category).
-
Mixing of Drives (SAS/ SATA/ NVMe) is allowed on U.3 drive cage if selected along with Tri Mode
Controllers.
HPE DL38X Gen10 Plus 2LFF Primary FIO Riser Kit
P14579-B21
Notes:
-
Can be selected only with 8LFF Model X and 12LFF Model X.
-
This option is housed into a Riser assembly and will be installed in Primary Riser location.
-
Since this option is part of the Riser assembly, it must be classified as a Primary Riser and Max Qty=1
PRIMARY Risers is allowed per server.
HPE DL38X Gen10 Plus 2LFF Tertiary FIO Riser Kit
P14580-B21
Notes:
-
Can be selected only with 8LFF Model X and 12LFF Model X.
-
Secondary Riser CANNOT be selected if this option is selected.
-
HPE DL38X Gen10+ 2LFF LP Sec Riser Kit (P25903-
B21) and HPE DL38X Gen10+ 2LFF Tertiary FIO Kit
(P14580-B21) cannot be selected together.
-
This option is housed into a Riser assembly and will be installed only in Tertiary Riser location
-
Since this option is part of the Riser assembly, it must be classified as a Tertiary Riser and Max Qty=1
TERTIARY Risers is allowed per server.
- Requires selection of Second Processor.
HPE DL38X Gen10 Plus 2LFF Low Profile Secondary Riser Kit
P25903-B21
Notes:
-
Can be selected only with 8LFF Model X and 12LFF Model X.
-
HPE DL38X Gen10+ 2LFF LP Sec Riser Kit (P25903-
B21) and HPE DL38X Gen10+ 2LFF Tertiary FIO Kit
(P14580-B21) cannot be selected together.
-
This option is housed into a Riser assembly and will be installed only in Secondary Riser location
-
Since this option is part of the Riser assembly, it must be classified as a Secondary Riser and Max Qty=1
secondary Risers is allowed per server.
- Requires selection of Second Processor.
HPE ProLiant DL38X Gen10 Plus 4LFF SAS/SATA 12G LP Midplane Drive Cage Kit
P26919-B21
Notes:
-
Can be selected only with 8LFF Model X and 12LFF Model X.
-
This option requires the selection of High Performance Fan Kit (P14608-B21).
-
If this option is being configured into a 12LFF Model-X or 24SFF Model-X, this rule does not apply as
these models already come standard with the High Performance Fans.
-
If this option is selected, NO "Full Length" (FL) PCIe cards can be supported.
-
Max of 1 Mid tray allowed per server for selection.
o 4LFF Midtray Kit (P26919-B21)
o 8SFF U.3 x1 Mid Tray (P27193-B21)
o 8SFF U.3 x4 Mid Tray (P39769-B21 )
-
Mid Tray cannot be selected with Processors above 165W.
- Requires selection of Second Processor.