ProLiant DL380 Gen10 Plus Server

QuickSpecs
HPE ProLiant DL380 Gen10 Plus Server
Core Options
Page 30
HPE ProLiant DL380 Gen10 Plus 2SFF SAS/SATA 12G BC x16 Slot 3 Primary/Secondary Riser Kit
P26920-B21
Notes:
-
This option requires the selection of High Performance Fan Kit (P14608-B21).
-
If this option is being configured into a 12LFF Model-X or 24SFF Model-X, this rule does not apply as
these models already come standard with the High Performance Fans.
-
If Qty 1 is selected then it can be installed into the Primary Riser location or the Secondary Riser location.
If other Primary Riser is selected along with it then it will be considered as Secondary Riser and vice-versa
(Max of 1 Primary Riser per Server and Max of 1 Secondary Riser per Server)
-
If Qty 2 are selected then it will be installed into both Primary Riser and Secondary Riser location. No
other Primary Riser and Secondary Riser are allowed.
-
If this Qty1 of this option is selected along with other Primary Riser (i.e. if it is selected as Secondary Riser)
or Qty2 of this option is selected then:
o Tertiary Riser cannot be selected (Except Tertiary 2P NVMe Riser (P27093-B21))
o Second Processor must be selected
HPE ProLiant DL380 Gen10 Plus 2SFF SAS/SATA 12G BC Front/Tertiary Stackable Drive Cage Kit
P26923-B21
HPE ProLiant DL300 Gen10 Plus 2U 2SFF SAS/SATA 12G BC Side-by-Side Drive Cage Kit
P26925-B21
Notes:
-
Can be selected only with 8LFF Model X.
-
This option requires the selection of High Performance Fan Kit (P14608-B21).
-
If this option is being configured into a 12LFF Model-X or 24SFF Model-X, this rule does not apply as
these models already come standard with the High Performance Fans.
-
HPE DL380 Gen10 Plus 2SFF U.3 SbS Kit (P26924-B21) and HPE DL380 Gen10 Plus 2FF SbS HDD Kit
(P26925-B21) cannot be selected together.
HPE ProLiant DL38X Gen10 Plus 8SFF x1 Tri-Mode 24G U.3 BC Midplane Drive Cage Kit
P27193-B21
Notes:
-
This option requires the selection of High Performance Fan Kit (P14608-B21).
-
If this option is being configured into a 12LFF Model-X or 24SFF Model-X, this rule does not apply as
these models already come standard with the High Performance Fans.
-
If this option is selected, NO "Full Length" (FL) PCIe cards can be supported.
-
Max of 1 Mid tray allowed per server for selection.
o 4LFF Midtray Kit (P26919-B21)
o 8SFF U.3 x1 Mid Tray (P27193-B21)
o 8SFF U.3 x4 Mid Tray (P39769-B21 )
-
8SFF Mid tray supports drives below 12W only, consider this limitation for selection of Drives with this
cage.
-
Mixing of Drives (SAS/ SATA/ NVMe) is allowed on U.3 drive cage if selected along with Tri Mode
Controllers.
- Mid Tray cannot be selected with Processors above 165W.
HPE ProLiant DL300 Gen10 Plus 2U 8SFF x4 Tri-Mode 24G U.3 BC Midplane Drive Cage Kit
P39769-B21
Notes:
-
This option requires the selection of High Performance Fan Kit (P14608-B21).
-
If this option is being configured into a 12LFF Model-X or 24SFF Model-X, this rule does not apply as
these models already come standard with the High Performance Fans.
-
If this option is selected, NO "Full Length" (FL) PCIe cards can be supported.
-
Can be selected only with 8SFF Model X and 24SFF Model X.
-
Mixing of Drives (SAS/ SATA/ NVMe) is allowed on U.3 drive cage if selected along with Tri Mode
Controllers.
-
Mid Tray cannot be selected with Processors above 165W.
- Supports 8 SAS/SATA SFF drives in Box 1 or 2 to a max of 24 SFF SAS/SATA front.