ProLiant DL380 Gen10 Plus Server

QuickSpecs
HPE ProLiant DL380 Gen10 Plus Server
Memory
Page 48
Memory Population guidelines
HPE ProLiant DL380 Gen10 Plus
HPE ProLiant Gen10 Plus 16 slot per CPU DIMM population order
DIMM population order
DIMM slot
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 DIMM
14
2 DIMMs
3
14
4 DIMMs
3
7
10
14
6 DIMMs
1
3
7
10
14
16
8 DIMMs
1
3
5
7
10
12
14
16
12 DIMMs
1
2
3
4
7
8
9
10
13
14
15
16
12 DIMMs
1
1
3
4
5
7
8
9
10
12
13
14
16
16 DIMMs
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Notes:
− Ommited DIMM counts/socket not qualified by Intel.
−
1
Required by Sub-NUMA Cluster (SNC) configurations, must be ordered with 12 DIMM SNC2 FIO Enable Kit (P26933-
B21).
General Memory Population Rules and Guidelines:
• Install DIMMs only if the corresponding processor is installed.
• If only one processor is installed in a two-processor system, only half of the DIMM slots are available.
• To maximize performance, it is recommended to balance the total memory capacity between all installed processors.
• When two processors are installed, balance the DIMMs across the two processors.
• White DIMM slots denote the first slot to be populated in a channel.
• Mixing of DIMM types (UDIMM, RDIMM, and LRDIMM) is not supported.
• The maximum memory speed is a function of the memory type, memory configuration, and processor model.
• The maximum memory capacity is a function of the number of DIMM slots on the platform, the largest DIMM capacity
qualified on the platform, and the number and model of installed processors qualified on the platform.
• For details on the HPE Server Memory Options Population Rules, visit:
https://psnow.ext.hpe.com/doc/a50003886enw
• To realize the performance memory capabilities listed in this document, HPE DDR4 SmartMemory is required.
• For additional information, please see the HPE DDR4 SmartMemory QuickSpecs.