Server User Manual

Figure 11. Changing the host’s IQN

Note

Once you have used the CMC to define an authentication method for an

iSCSI volume, if the host’s IQN changes, you must update accordingly.

Alternatively, you can update a host’s IQN via CMC’s command-line interface (CLI). Use the host-

param-set command.

Note

The host’s Universally Unique Identifier (UUID) must be specified.

Verify the change using the host-param-list command.

Specifying IQN authentication

This subsection talks about an “authentication method” that is given a name.

Before specifying the authentication method for a volume, you can use the CMC to determine its IQN.

In this example, SR access is created for volume XPSP2-01, which has an IQN of iqn.2003-

10.com.lefthandnetworks:hp-boulder:55:xpsp2-01 (obtained by highlighting this volume in the Details

tab, as shown in Figure 12.)