User's Manual

HM-Z3 User Manual
10
3) Pull the end of the roll straight toward you. Then press down on both sides of the printer cover to
close it firmly.When you close the printer cover, make sure that it is closed on both sides.
4) Use the tear bar to cut the extra paper.
WARNING
1) Do not touch the tear bar.
• There is a tear bar inside the paper outlet slot. You could neither put your hand in the paper outlet
slot while printing is in progress nor put your hand into the outlet even when printing is not in
progress.
• The paper cover can be opened when replacing the paper, be careful not to place your face or hands
too close to the tear bar.
2) During and immediately after printing, the area around the thermal head is very hot. Do not touch
it, as you could be burned.