Operating instructions

VDPC146 VELLEMAN 11
5. Transmit and Receive MIDI files
Open-loop mode
Closed-loop mode
6. Low Power
When the power voltage is low, the display will show LOP. Please check your power supply. LOP may appear briefly
just after you have turned the device on. Pay no attention to this, it’s normal.
7. MIDI Run
• If no MIDI data are received for ten minutes, the VDPDMXC146 goes to standby mode.
• You need to enter the device ID (= 55H) in order to send or receive a file. You can add scenes to the memory or
call them up and you can exchange information with a device that is connected to your VDPDMXC146.
• This unit sends or receives NOTE information as follows :
NOTE NUMBER VELOCITY FUNCTION
22 – 69 Programme Master Turn on/off programme 1 - 48
70 – 93 Channel Dimmer Turn on/off channel 1 – 24
94 FULL-ON
95 DARK
96 HOLD
97 Turn on/off audio chase
98 CHASE / SCENES mode
99 DOUBLE PRESET mode
100 SINGLE PRESET mode
101 Step change
102 BLACK OUT
8. Switch the display between 0-100% and 0-255
• Hold the RECORD button
• Press the % OR 0-255 key
• Release the RECORD button
TRANSMITTER
MIDI out
RECEIVER
MIDI in
TRANSMITTER
MIDI out MIDI in
RECEIVER
MIDI out MIDI in