Operating instructions

VDPC146 VELLEMAN 5
26. DARK
For a blackout of all channels, including the ones that are currently in FULL ON and FLASH mode.
27. ALL REV
Reverses the direction of a chase.
28. 0% or 0-255
Switches the display from 0-100% to 0-255 and vice versa.
29. REV ONE
Hold this button and press any button of PRESET B. The selected scene will now chase in reverse.
30. CHASE REV
This button enables you to reverse the chase controlled by the SPEED slider.
31. BEAT REV
This button enables you to reverse the chase to the beat of the music.
b) Back Panel
1. Power input : 12-20Vdc / 500mA
2. MIDI THRU : used to transmit MIDI data received on the MIDI IN connector
3. MIDI OUT
4. MIDI IN
5. DMX OUT : 3-pin female XLR
6. DMX POLARITY : select the polarity of the DMX OUT
7. AUDIO INPUT : RCA (cinch) line in : 100mV, 1Vp-p
8. REMOTE : FULL ON and BLACKOUT can be controlled from a distance using a ¼” stereo
jack (6.35mm)
c) Connections
The manufacturer is not responsible for damage caused by improper connections.
Connect the supplied adapter with the DC jack and connect the other end with a mains outlet.
Plug the XLR cable into the VDPDMXC146 and connect the other end with the first device you wish to control.
Plug the MIDI cables into the appropriate MIDI sockets.
Fig. 2