User manual

PROMIX230DSP HQPOWER

PROMIX230DSP

PROFESSIONAL DJ MIXER - 2 CHANNELS - DSP EFFECTS

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the

environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a

specialized company for recycling. This device should be returned to your distributor or to a local recycling service.

Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing HQPOWER! Please read the manual thoroughly before bringing this device into service. If the device

was damaged in transit, don't install or use it and contact your dealer.

2. Features

• 1 microphone, 2 phono and 4 line/CD inputs

• DJ mic ¼” and XLR input

• talkover switch

• gain control for each channel

• bass and treble controls on DJ mic channel

• bass, middle and treble controls on channel 1 and 2 with -26dB cut

• separate stereo kill switch for low, mid and high frequencies

• cue section with switch, level and cue/pgm pan controls

• 20-bit digital multi-effect processor (DSP) with 99 programs, on switch, source assign, effect return level

• 2-line LCD (16 characters) with all 99 preset names and audio input level monitor

• replaceable crossfader with reverse control

• BPM display and beat offset indicators

• punch-in control

• unbalanced master output with output level controls

• headphone output with level control

• LED VU-meter for master output

3. Safety Instructions

• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not

accept responsibility for any ensuing defects or problems.

• Do not install this device near heat sources.

• Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device against

damage by leaving it switched off until it has reached room temperature.

• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.

• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.

• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.

• Do not let the power cord come in contact with other cables.

• Place all faders and volume controls in their minimum position (“0”) before activating the device.

• Place the power switch in the off position before connecting to the mains.

• Switch the amplifier off first and switch on last.

• Keep the device away from splashing and dripping liquids. Never put objects filled with liquid on top of the device.

• Note that damage caused by user modifications to the device is not covered by the warranty.

• Keep the device away from children and unauthorised users.