HQ-006 ¼ Turn Actuator Installation & Maintenance Manual HQ-006 I&M Manual HQ-402-0606 1
Table of Contents General 1.0 Actuator Mounting 2.0 External Construction 3.0 Standard Wiring Diagrams 4.0 Manual Override 5.0 Electrical Connection 6.0 Limit Switch Setting Instructions 7.0 Lubrication 8.0 MDPI (Mechanical Dial Position Indicator) ____________________9.0 1.0 Maintenance and Storage 10.0 Trouble Shooting 11.0 Standard Specifications 12.0 EIM Office Locations 13.
2.0 Actuator Mounting The actuator may be mounted in any position The HQ-006 Actuator is supplied with a female output drive and adaptor bushings. ISO5211 FO3/FO5 and FO7 Bolt patterns are provided for actuator mounting. 3.
.0 5.0 Standard Wiring Diagram Manual Override The HQ-006 actuator comes standard with a manual override nut. This is located on the bottom of the unit, and can be easily operated with a 5M wrench .
6.0 Electrical Connection 7.0 Limit Switch Setting Instructions • • • • • • • • • 8.0 Move valve to mid-position by override nut. This will allow sufficient time to stop actuator in case of improper hook-up Identify means of removing power during hook-up Be sure no erroneous remote control signals can be received causing actuator to energize Electrically operate the valve in the open direction.
10.0 Maintenance and Storage At least once a year a check should be made of your EIM HQ Series Actuator Disconnect all power to actuator. Open Electrical Enclosure. Inspect and tighten all electrical connections Visually inspect for any electrical or mechanical damage. Replace worn or damaged components. Check lubrication consistency and levels. Fill or replace if required. Actuators must be stored in a clean, cool and dry area.
12.0 HQ Standard Features Enclosure Rated Enclosure Power Supply Motor Limit Switches Stall Protection Indicator Manual Override Space Heater Conduit Entries Lubrication Ambient Temperature External Coating 13.0 Weatherproof IP67 High grade aluminium alloy, corrosion coated 110/220 VAC, 1 PH, 50/60Hz Reversible Motor 4 x open/close SPDT, 250VAC 3A rating Built –in thermal protection MDPI (Mechanical Dial Position Indicator) Manual Override Nut 2W Anti-condensation (2) x PG13.