Operating Instructions
- 12 -
2.4.3 SERVICE
a) Only charge the batteries in suitable chargers
If the battery is not used in a suitable charger, it may be permanently damaged
.
b)
charger or on the tool.
If a work break of more than 3 hours is expected, the battery must be removed from
the tool. Otherwise, the battery may be permanently damaged.
c)
for safety reasons.
Remove the battery from the charger immediately after the charging process is
completed.
d)
.
In both cases, currents can flow that
deep discharge the battery and can permanently
damage it.
e)
If the battery is stored while disconnected from the tool
and the charger, it will
maintain a constant capacity over a long period of time. (Loss approx. 5% per year)
f)
sunlight.
If the battery gets warmer than 50°C during operation (charging or discharging), it
must be removed from the charger or tool immediately.
NOTICE
Only allow your charging staon to be repaired by a qualied technician
using only original replacement parts, available from HS-Technik GmbH.
This ensures that the safety of your device is maintained.
NOTICE
Please make sure to follow the following instrucons for using lithium-ion
baeries!