Operating Instructions

- 15 -
3.1 BENEFITS
• Battery parameters are measured and processed
• Special HST frequency modulation impulse charging process
®
Anti-memory effect
• Automatic voltage detection
• IFCS - Intelligent Full Charge System for Li-Ion batteries
• Capacity-based charge maintenance mode only for Ni-Cd & NI-MH batteries
• Detection of defective cells
• Protection against reverse polarity
• Can also charge at temperatures > 40° C
• Adapter can be changed in 2 minutes
• Software update via USB
• Suitable for Ni-Cd, Ni-MH and Li-Ion batteries
• With PFC (Power Factor Control)
All common battery types from 3.6 - 50.4 V (43.2 V nominal voltage) such as Atlas-Copco,
Bosch, Fein, Makita, Panasonic, Desoutter, HS-Technik etc. can be quickly and reliably
charged with the HST-MV3 charging station.
3 COMMISSIONING
WARNING
The matching battery adapter and the correct software and firmware
must be mounted/installed to charge the batteries.