Operating Instructions

- 27 -
5.1 CHANGING THE BATTERY ADAPTER
In order to mount another baery adapter, proceed as follows:
The charging staon must be switched o and the power supply must be disconnected
prior to changing the adapter. Then, the baery which needs to be changed must be loo-
sened, so that the circuit board of the baery adapter is accessible.
There are 4 dierent designs / basic forms of baery adapters. Aer loosening the moun-
ngs, all 4 designs are removed in the same manner. To do this, li the adapter up slightly
and pull it out to the top.
WARNING
Only authorized specialists are permitted to change the battery adapter.
For the exchange is no electrical qualified personnel required.
DANGER
Be careful of sharp edges!