User manual

DIP SWITCH ADJUSTMENT
ZMR, ZMRV :
ZMRS, ZMRVS :
Integrated function of immediate-contact is adjustable at
devices with 2nd changeover (25-26/28)
Multifunction timer ZMR , ZMRS, ZMRV, ZMRVS
Serie 17,5mm
with 1 or 2 changeover
H
S
B
Industrieelektronik
APPLICATION
Time control
DESCRIPTION
MOUNTING
APPROVALS
The ZMR multifunction timers offers up to 11 selectable
timing functions and 8 different timing intervals in one unit.
The function and timing intervals can be adjusted with DIP
switches on the front panel of the relay. The multi-function
timer can operate on either AC or DC voltage using two
separate connections. For a 230V AC power supply use the
terminals A1/A2. For a 24V UC power supply use the
terminals A3/A2. The green LED indicates the connection to
the power supply. Timing commences with the connection of
the power supply or contact controlled on terminals B1/B2 or
voltage controlled on terminal B1.
Snap-on mounting using a standard DIN rail EN 50022.
The unit is designed to allow side-by-side mounting, with an
ambient temperature of < 60°C.
6
5
4
3
2
1
Time
Function
3
3 3 3 33
2
2 2 2 22
Delay-on operate*
Delay-on release
Pulse-on operate*
Pulse-on release
Flasher
beginning with pause*
Flasher
beginning with pulse*
1
1 1 1 11
6
5
6
5
6
5
6
5
6
5
6
5
4
44 4 4
4
0,05 - 1s
0,5 - 10s
3 - 60s
15 - 300s
0,5 - 10 min.
3 - 60 min.
15 - 300 min.
0,5 - 10 h
3
2
1
3
2
1
Watchdog
6
5
4
FUNCTION
Delay-on operate : Timing begins with the connection of the
power supply. This is indicated by a flashing yellow LED. After
set time has elapsed the output relay switches into ist working
position. This is indicated by a permanent on yellow LED. This
state will be set untill the supply voltage is disconnected.
Should the power supply be disconnected during recovery
time, the timer returns to its original state. This also applies if
the supply is disconnected during the timing period.
3
3 3 3 33
2
2 2 2 22
Delay-on operate*
Delay-on release
Pulse-on operate*
Pulse-on release
Flasher
beginning with pause*
Flasher
beginning with pulse*
1
1 1 1 11
6
5
6
5
6
5
6
5
6
5
6
5
4
44 4 4
4
3
2
1
3
2
1
Watchdog
6
5
4
0,05 - 1s
0,15 - 3s
0,5 - 10s
1,5 - 30s
3 - 60s
0,15 - 3 min.
0,5 - 10 min.
1,5 - 30 min.
PART NUMBER
011201 ZMR1 1 changeover, 0,05s - 10h
011202 ZMR2 2 changeover, 0,05s - 10h
contact controlled on B1/B2
011203 ZMRS1 1 changeover, 0,05s - 30min.
contact controlled on B1/B2
011204 ZMRS2 2 changeover, 0,05s - 30min.
contact controlled on B1/B2
011301 ZMRV1 1 changeover, 0,05s - 10h
voltage controlled on B1
011302 ZMRV2 2 changeover, 0,05s - 10h
voltage controlled on B1
011303 ZMRVS1 1 changeover, 0,05s - 30min.
voltage controlled on B1
011304 ZMRVS2 2 changeover 0,05s - 30min.
voltage controlled on B1
contact controlled on B1/B2
t
t
t
time
A1 (A3) / A2
Kontakt 15,25
16,26
Kontakt 15,25
18,28
15A1
A2
16
18
25
26
28
A3
HSB Industrieelektronik
Hans-Bördlein-Str. 10
97723 Reith
Tel.: +49 9736 / 75759 - 0
Fax: +49 9736 / 75759 - 20
info@hsb-electronics.de
www.hsb-electronics.de
*

Summary of content (4 pages)