OPERATING MANUAL SHREDDER HSM FA 400.2 english Keep in a safe place for future use! 1.513.999.
FA 400.2 Contents 1. Proper use, warranty.................................................................................................................3 2. Safety instructions.....................................................................................................................3 3. Overview ...................................................................................................................................4 4. Dimensions ................................................
FA 400.2 1. Proper use, warranty The shredder is exclusively designed for destroying paper and cardboard, as well as store cards, credit cards, CD-ROMs and floppy disks. Its sturdy drive mechanism is not damaged by paper clips and staples. Our general business conditions are applicable. We provide a one year warranty for the document shredder. The warranty period is 6 months when used in multiple shifts.
FA 400.2 3.
FA 400.2 4. Dimensions 1157 1208 1646 804 1564 HSM FA 400.2 Solo version 1157 1208 1646 804 1644 HSM FA 400.
FA 400.2 5. Transportation, installation • • • • • Place the shredder in its packaging on a smooth, level surface. Remove the packaging. If you need to move the shredder through narrow doors, you can wait until it is at its final location before fitting the loading tray. Without the tray, the machine is only 805 mm wide. When moving the shredder, note that it may topple over. The shredder can be moved on its rollers.
FA 400.2 6. Operating and display elements on the keypad Paper jam or overload Red LED Door open Red LED Ready for operation Green LED Waste bag full Red LED Start button The shredder switches on. The feed belt moves in the intake direction. Stop button The cutting block and feed belt stop. The shredder is in standby mode. Reverse button The cutting block and feed belt run in reverse. 7. Start-up, inspecting the safety devices Switching on the shredder • Pull out the emergency stop button.
FA 400.2 Inspecting the safety devices Shredding material Check that the safety devices are working properly: • At the start of each shift • After any maintenance or repair work Do not start the machine until you have checked the emergency stop button and the door switch and found them to be in perfect working order. If any defect arises during operation stop the machine immediately and make sure it is corrected.
FA 400.2 Stopping the shredder • Press the stop button. The cutting block and feed belt stop. The shredder switches to standby mode. Switching off the shredder • Turn the main switch on the paper shredder or the baling press to 0. You can secure the main switch in this position using a padlock. 8.
FA 400.2 9. Maintenance and care Cleaning the cutting block Strip cut machines: (1 x daily) • Switch off the shredder. • Squirt special cutting apparatus oil through the paper feed opening onto the blade rollers. Order no. 1.235.997.401 for a 250 ml bottle Order no. 1.235.997.500 for 5 litre container Checking the chain tension (twice yearly) • Switch off the shredder. • Pull out the power plug. • Remove the tray and the left cover panel. The sag of the chain should be 4 – 10 mm.
FA 400.2 You must check that the feed belt runs straight: Switch on the shredder and let it run for 10 minutes. During this time, the feed belt must run in the middle of the snub roller. If it slips to the left or right edge, you must alter the setting of the snub roller. Greasing the drive chains and cogs (twice yearly) • Switch off the shredder. • Pull out the power plug. • Remove the tray and the cover panels.
FA 400.2 10. Scope of supply, accessories • Machine on pallet with a wooden frame, strapped with packing tape and packed in foil 4 waste bags, order no. 1.513.995.000 for 2-chamber system (Solo version) 1 waste bag, order no. 1.513.995.100 for 1-chamber system (Solo version) Special cutting block oil For strip cut machines: 250 ml bottle, order no. 1.235.997.401 For cross cut machines: 5 l container with spout, order no. 1.235.997.500 Operating manual Accessories: strip curtain, order no. 1.513.050.
FA 400.2 12.
400 V / Sol o FA 400.
400 V / Sol o FA 400.
FA 400.
FA 400.
FA 400.
FA 400.
FA 400.2 Declaration of Conformity Machinery directive 98 / 37 / EG EMC directive 89 / 336 / EWG Low voltage directive 73 / 23 / EWG The manufacturer HSM GmbH + Co. KG, Bahnhofstrasse 115, D-88682 Salem declares herewith, that the paper shredder (Solo machine) HSM FA 400.2 corresponds with the above mentioned EC Machine Directive including all relevant modifications.
