User's Manual

Table Of Contents
Charging the battery
Before you turn on and start using HTC Desire 500, it is recommended that you
charge the battery.
§ Use only the adapter and the USB cable that came with HTC Desire 500 to charge
the battery. When the battery power is too low, make sure to use the power
adapter to charge, not the USB cable connection with your computer.
§ Do not remove the battery from HTC Desire 500 while you are charging it using
the power or car adapter.
1. Insert the small end of the USB cable into the USB connector.
2. Insert the other end of the USB cable into the power adapter.
3. Plug in the power adapter to an electrical outlet to start charging the battery.
§ As a safety precaution, the battery stops charging if it overheats.
§ When you're using the Internet and charging the battery, HTC Desire 500 may
become warmer. This is normal.
§ To conserve energy, unplug the power adapter from the electrical outlet after you
finish charging.
Switching the power on or off
Switching the power on
Press the POWER button.
When you turn on HTC Desire 500 for the first time, you’ll need to set it up.
12 Unboxing