User's Manual

12 Safety and regulatory guide
developed by expert non-government organizations, such as the
Institute of Electrical and Electronics Engineers (IEEE) and the
National Council on Radiation Protection and Measurements
(NCRP), and input from other federal agencies such as the FDA
and EPA. In countries that follow the Council of the European
Union, the SAR limit is 2.0 W/kg.
SAR testing is conducted with the device placed in common
operating positions (e.g., held against the head, worn on the body)
and transmitting at its highest certified power level in each
frequency band of operation. Because the device is transmitting at
its highest certified power level, SAR tests capture a worst-case
operating scenario and therefore often do not reflect the amount
of RF exposure during normal, everyday use. More information on
SAR testing is available on the FCC’s website at
http://www.fcc.gov/guides/wireless-devices-and-health-concerns .
HTC Corp. submitted SAR test results demonstrating compliance
with the FCC’s SAR limit for wireless devices as part of the FCC’s
equipment certification process for this device. These results can
be accessed via the FCC’s equipment authorization database
(found at http://transition.fcc.gov/oet/ea/fccid/) by searching for
the device’s FCC ID: NM8 0P4E200 . This device’s maximum SAR
values as reported to the FCC are:
 Head: 0.91 W/kg@1g
 Body-worn Accessory: 1.17 W/kg@1g
Body-worn Operation
This device was tested for compliance with applicable SAR limits
during typical body-worn operations. To ensure that RF exposure
levels remain at or below the tested levels, use a belt-clip, holster,
or similar accessory that maintains a minimum separation distance
of 1.0 cm between your body and the device, with either the front
or back of the device facing towards your body. Such accessories
should not contain any metallic components. Body-worn
accessories that do not meet these specifications may not ensure
compliance with applicable SAR limits and their use should be
avoided.
Reducing RF Exposure
Organizations such as the FCC have identified the following
measures to reduce your exposure to RF energy:
 Use speaker mode or a hands-free accessory to minimize time
spent with the wireless device held against your head;