Security Datasheet

Report No.: FMT20211217MSDS01
GB/T 16483: 2008 01 Page 5 of 8 Pages
2. Keep the sample in the cool, dry and well-ventilated place (temperature: -20~30 ºC, humidity: 45~85%). Do
not exposure to direct sunlight for long periods. Keep away from fire and heating sources. Don’t keep the
samples with oxidizer and acid.
3. Equip with relevant types and quantities of the extinguishment instruments. The storage place should be
equipped with suitable shelter materials for divulgence handling.
4. For rechargeable battery, charge the battery every 6 months to the amount specified by the manufacture,
even if the battery is not used.
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Control:
Keep away from heat and open flame. Supply with sufficient partial air exhaust. Store in a cool, dry place.
Respiratory Protection:
Not necessary under conditions of normal use. Wear self-contained breathing filtermask if the density exceed in
the air. Wear breathing apparatus under the condition of emergency rescue or evacuation.
Eyes Protection:
Not necessary under conditions of normal use. Wear protective glasses if handling a leaking or ruptured battery.
Skin and Body Protection:
Not necessary under conditions of normal use. Wear fireproofing, gas defense clothes in case of handling a
leaking or ruptured battery.
Hands Protection:
Not necessary under conditions of normal use. Wear chemical resistant rubber glove.
Other Protections:
No smoking, dining and drinking water in the workplace. Keep good habit of hygiene.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
—
Physical state:
Solid
Form:
—
Odor:
Odorless
Solubility:
Insoluble in water
SECTION 10 - STABILITY AND REACTIVITY
Stability:
Stable under normal temperature and pressure.
Distribution of Ban:
Explosives, inflammables, strong oxidants and corrosives.
Conditions to Avoid:
Fire source, heating source, disassemble, external short circuit, crushes, deformation, high temperature above
100°C, direct sunlight and high humidity, immerse in water or overcharge.
Hazardous Polymerization:
Will not occur.
Hazardous Decomposition Products:
Metal oxides, carboxyl compound such as CO, CO
2
, etc.
SECTION 11 - TOXICOLOGICAL INFORMATION