User Guide

Getting Started 29
When you turn on your device for the first time, a Quick Start Wizard
guides you through the calibration process and the setup of date
and time, and password. For more information about touch screen
calibration, see “Calibrate the device” later in this chapter. After the Quick
Start Wizard finishes, the device installs customization settings, then
restarts.
Note After the device restarts, you may be prompted to set up an e-mail
account. Refer to Chapter 7 for details.
To turn off the power
• Press and hold the POWER button for a few seconds.
Tap Yes when a message prompts you to choose whether or not to turn
off the device completely.
Auto configure the data connection settings
The first time you power on your device,
you will see a notification message from
Connection Setup on the Today screen.
Connection Setup automatically
configures your device’s data
connections, such as 3G/GPRS, WAP, and
MMS, so that you do not need to enter
the settings manually for your device.
To automatically configure data connection settings
1. When you see the notification message from the Connection Setup,
tap Yes.
Note If you do not see the notification message, tap on the title bar to
display the message.
2. If your SIM card supports multiple network operator profiles, a
message will appear with network profile choices. Select the profile
you want to use and tap OK.
3. Connection Setup then starts to configure your device’s data
connection settings.
4. After the Connection Setup completes the configuration, tap Restart.
For more information about Connection Setup, see Chapter 10.