HTC BH M400 Bluetooth® headset.
Table of Contents Thank you ............................................................................................................................................................... 3 About your HTC BH M400 ...................................................................................................................................... 3 What your headset can do .....................................................................................................................................
Thank you Thank you for purchasing the HTC BH M400 Bluetooth® headset. We hope you enjoy it! This User Guide will get you started and ready to make the most of your headset. About your HTC BH M400 1. Earphone 2. Multi-function Key 3. Red/Blue LED 4. Increased Vol Key 5. Decreased Vol Key 6. Wearing Clip 7. Microphone 8.
Specifications Talk time up to 8 hours/standby time up to 200 hours Rechargeable battery with charging option from AC power supply, PC via USB cable or car charger (not included) Multi-coloured light for status and battery indicator Qualified for Bluetooth Specification version 2.0 + EDR (enhanced data rate), supporting Headset and Hands-free Profiles. e-SCO for enhanced audio quality Size: 58mm (L) x 20mm (W) x 12.
. Pairing Bluetooth headset needs to be paired to your mobile phone before it can be used. 1. Make sure headset is turned off. Then very long press the action/power key for 6 seconds until the LED flashes Blue and Red quickly, this indicates the headset is in pairing mode. 2. Set your mobile phone to search for Bluetooth devices, 3. When asked for a password, enter ”0000”. Your device will confirm the pairing is successful. 6. Reconnecting the headset to mobile phone 1.
How to… Making a call Use your mobile phone in the normal way to make a call. Transferring audio between headset and mobile phone During an ongoing call, long press the action/power key to switch conservation between your headset and the mobile phone. Making a call with voice dialling Long press the Volume up key or Volume down key to activate voice dialling.
To check the battery status Press the action/power key briefly: One red flash- the battery needs charging soon. Two Blue flashes- the battery is half full Three blue flashes- the battery is fully charged What the lights mean See User Interface Specification for detail. Mode LED indicator Power on Blue LED solid On for 2.5 seconds Power off Red LED solid On for 2.
I want to reset the headset It is possible to reset and test the headset by ’Press and hold’ the power key until the red and blue light off. The headset will automatically turn off after approx. 20 seconds. The next time you power on, the headset will go into pairing mode as the first time you powered your new BH M400 on. Will the HTC BH M400 work with other Bluetooth equipment? The HTC BH M400 is designed to work with Bluetooth mobile phones.
With continued use at high volume, your ears may become accustomed to the sound level, which may result in permanent damage to your hearing without any noticeable discomfort. Using the headset while operating a motor vehicle, motorcycle, watercraft or bicycle may be dangerous, and is illegal in some jurisdictions. Check your local laws. Use caution while using your headset when you are engaging in any activity that requires your full attention.
The WEEE logo on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving natural resources.
RoHS Compliance This product is in compliance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.
5. Standby mode is when the HTC BH M400 is passively waiting for a call. When you ‘end’ a call on your mobile phone, the headset goes into standby mode. © 2009 HTC. All rights reserved. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by HTC is under license. (Design and specifications subject to change without notice).
