User's Manual

Getting Started | 11
1 Notification LED Indicate the battery charging status, notification and CDMA network status.
2 Touch Screen
The 3.5” LCM touch screen allows you to write, draw, or make a selection with
the stylus.
3 NAVIGATION Control
Press this multi-directional control up/down/left/right to move through menus
and program instructions; carry out the selection by pressing ENTER (the
center button).
4 Home Button Press to retrun to the Today screen.
5 Keyboard Button Press to open the soft keyboard.
6
Notes/Text/Document
Button
Press to open the Notes/Text/Document application.
7 Fingerprint Sensor This sensor is used to identify the user’s fingerprint.
8 Time/Expense Button Press to open the Time/Expense application.
9 MAP Button Press to open the MAP application.
10 Message Button Press to open the Message application.
11
I/O Cover The rubber cover protects the I/O on the bottom side of the device.
12 USB Port Connect the provided USB cable to synchronize data with PC.
13 Power Jack Plug the provided AC adapter to this connector to charge the battery.
14 Phone Connector Lets you connect the provided phone cable.
15 Velcro Hook
Attach the velcro strap to the hooks, which allows you to hold the device in
your palm safely.
16 Battery Cover Slide out to access the battery compartment.
17
POWER/Backlight
Button
Press and hold to turn your device on or off. Press to turn the backlight on or
off.
18 SD Card Slot Open the rubber cover and insert a storage card (SD card) for storing data.
19 Stylus Use the stylus to write, draw, or select items on the touch screen.
20 Buzzer Provide the system sound for event alert.
21 RESET Button With the stylus, press the Reset button to soft-reset your device.