User's Manual

Getting Started | 13
Install and charge the battery
Before you can use your device, you need to install and charge the battery.
To install the battery
1.
Slide out to remove the battery cover.
2.
Push the battery latch to the Unlock position (
).
3.
Insert the battery by aligning the exposed copper part of the battery pack with the
protruding copper conductor, and then push down the battery into place.
4.
Push the battery latch to the Lock position (
).
5.
Replace the battery cover.
Low battery
When the low-battery warning appears, do the following:
1.
Immediately save your current data.
2.
Connect your device to the power source.
To check the battery power
•
Tap
Start
>
Settings
>
System
tab >
Power
.