User's Manual

Getting Connected | 51
2.
Tap
Start > Settings > Connections
tab
> Connections
.
3.
In
My Work Network
, follow the instructions for each type of connection.
4.
Complete the connection wizard, and then tap
Finish
.
To start browsing the Internet
•
When the connection settings are completed, tap
Start > Programs > Internet
Explorer
.
To reset or modify the network card settings on your device
1.
Tap
Start > Settings > Connections
tab
> Network Cards
.
2.
In the
My network card connects to
list, select the appropriate item:
•
If you want to connect to the Internet using your ISP, select
The Internet
.
•
If you want to connect to a private network, select
Work
.
3.
In
Tap an adapter to modify settings
, tap the appropriate adapter. The fi elds on the
IP Address
tab are populated automatically.
4.
Confi gure the TCP/IP settings (if required). If your ISP or private network does not
use dynamically-assigned IP addresses, tap
Use specifi c IP address
and enter the
requested information. Contact your ISP or network administrator to obtain the IP
address, subnet mask, and/or default gateway (if required).
5.
Confi gure the DNS and WINS settings (if required). If your ISP or private network
does not use dynamically-assigned IP addresses, enter the requested information on
the
Name Servers
tab. Servers that require an assigned IP address may also require
a way to map computer names to IP addresses. DNS and WINS are the resolution
options supported on your device.