Instructions / Assembly
15 14
1. Know your power tool. Read and understand the
Owner’s Manual and observe the warnings and
instruction labels axed to the tool.
2. Properly ground all tools.
3. Keep guards in place.
4. Remove adjusting keys and wrenches.
5. Keep work area clean and dry.
6. Keep children away.
7. Never leave running machines/tools unattended.
8. Disconnect tools from service.
9. Regularly maintain tools.
10. Use correct tools for the job.
11. Never force a tool.
12. Wear safety apparel.
13. Wear safety glasses/goggles.
14. Never stand or sit on tools.
15. Replace damaged components immediately.
16. Think Safety. Safety is a combination of operator
awareness, common sense and alertness at all times.
Safety Rules
Using power tools of any kind can be dangerous if safe operating procedures are not followed. Recognizing the
hazards of each tool and using them with respect and caution will considerably limit the possibility of personal
injury. However, if safety precautions are ignored, personal injury will likely result. Always use common sense –
your personal safety-is your responsibility
Warning:
Read Owners Manual carefully and be completely familiar with the correct and safe operation of each
power tool before use. Failure to follow these rules may result in serious personal injury.
Congratulations
You have just purchased a shop accessory that will help you work safer, quicker, and easier than ever before.
Designed for a lifetime of use, HTC Products will help you do your best alone!
Roller Tables
Model Width Length #Rollers
HRT-70 15in 66in 17
HRT-90 24in 66in 17
Parts List:
ID Description Part No. HRT-70 HRT-90
A
15in Roller Frame M3758 1 ---
B
24in Roller Frame M3759 --- 1
C
Wedge M3761 2 2
D
Outer Leg - 15in Base M3756 2 ---
E
Outer Leg - 22” Base M3757 --- 2
F
Brace M3760 2 2
G
Leg Clip M2135 2 2
H
Crank Handle M2522 2 2
I
13in Roller M3700 17 ---
J
22in Roller M3762 --- 17
K
Hinge G2614 2 2
L
Glide G2402 4 4
5 x 15mm Hex Head Bolt G1110 28 28
5mm Nylon Lock Hex Nut G1076 28 28