TC User Manual
Please Read Before Proceeding THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S OUTER CASING. PRIVACY RESTRICTIONS Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded.
warranty of any kind and is subject to change without notice. HTC also reserves the right to revise the content of this document at any time without prior notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or storing in a retrieval system, or translated into any language in any form without prior written permission of HTC.
ELECTRICAL SAFETY This product is intended for use when supplied with power from the designated battery or power supply unit. Other usage may be dangerous and will invalidate any approval given to this product. SAFETY PRECAUTIONS FOR PROPER GROUNDING INSTALLATION CAUTION: Connecting to an improperly grounded equipment can result in an electric shock to your device. This product is equipped with a USB Cable for connecting with desk-top or notebook computer.
SAFETY PRECAUTIONS FOR DIRECT SUNLIGHT Keep this product away from excessive moisture and extreme temperatures. Do not leave the product or its battery inside a vehicle or in places where the temperature may exceed 60°C (140°F), such as on a car dashboard, window sill, or behind a glass that is exposed to direct sunlight or strong ultraviolet light for extended periods of time. This may damage the product, overheat the battery, or pose a risk to the vehicle.
If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn the phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
• Avoid hot areas The product should be placed away from heat sources such as radiators, heat registers, stoves, or other products (including, but not limited to, amplifiers) that produce heat. • Avoid wet areas Never use the product in a wet location. • Avoid using your device after a dramatic change in temperature When you move your device between environments with very different temperature and/or humidity ranges, condensation may form on or within the device.
Contents Chapter 1 Getting Started 11 1.1 Getting to Know Your Device and Accessories..........................................12 1.2 The Battery and the Storage Card..............................................................16 1.3 Starting Up.....................................................................................................18 1.4 The Today Screen.........................................................................................19 1.5 The Start Menu...........................
Chapter 4 Setting Up Your Device 4.1 4.2 4.3 4.4 Basic Settings...............................................................................................54 Personalizing the Today Screen..................................................................56 Customizing Phone Services.......................................................................58 Protecting Your Device................................................................................
Chapter 9 Working With Documents and Files 9.1 9.2 9.3 9.4 Microsoft® Office Mobile.............................................................................98 Adobe® Reader® LE......................................................................................98 Copying and Managing Files......................................................................99 ZIP..............................................................................................................
Chapter 1 Getting Started 1.1 Getting to Know Your Device and Accessories 1.2 The Battery and the Storage Card 1.3 Starting Up 1.4 The Today Screen 1.5 The Start Menu 1.6 Quick Menu 1.7 Quick Tasks 1.8 HTC Home 1.9 TouchFLO™ 1.10 Status Icons 1.11 Programs 1.12 Settings 1.
Getting Started 1.1 Getting to Know Your Device and Accessories Front panel Notification LEDs * See description below. Earpiece Listen to a phone call from here. Touch Screen TALK Press to answer an incoming call or dial a number. 4-WAY NAVIGATION CONTROL with ENTER button Press this multi-directional control up, down, left, or right to move through menus and program instructions; carry out the selection by pressing the center button. END Press to end a call or to return to the Today screen.
Getting Started 13 Left panel Volume Up Button • Press to increase the speaker volume (or the earpiece volume during a call). • Press and hold to launch the Voice Notes recorder. Volume Down Button • Press to decrease the speaker volume (or the earpiece volume during a call). • Press and hold to start the Voice Command feature. Right panel POWER Press to turn off the display temporarily. To turn off the power, press and hold for about 5 seconds. CAMERA Press to launch the Camera.
Getting Started Back Panel 2 Megapixel Camera See Chapter 12 for details. Speaker Self-portrait Mirror Use it when taking self-portrait shots. Back Cover Remove to install the battery. Bottom Panel RESET Open the rubber cover to access the RESET button. With the stylus, press the RESET button to soft-reset your device.
Getting Started 15 Inside the box The product package includes the following items and accessories: • Touch Phone • AC Adapter • Battery • Extra Stylus • Getting Started Disc • Multifunction Audio Cable • Pouch • Quick Start Guide and Read First Poster • Screen Protector • USB Sync Cable • Wired Stereo Headset The Multifunction Audio Cable The supplied multifuntion audio cable enables you to use a stereo headset to listen to music while the device is connected to an AC adapter or the USB sync cable.
Getting Started 1.2 The Battery and the Storage Card Your device contains a rechargeable Li-ion battery. It is designed to use only manufacturer-specified original batteries and accessories. Battery performance depends on many factors, including network configuration, signal strength, the temperature of the environment in which you operate your device, the features and/or settings you select and use, items attached to connecting ports, and your voice, data, and other program usage patterns.
Getting Started 17 Battery Information To charge the battery New batteries are shipped partially charged. Before you start using your device, it is recommended that you charge the battery. Some batteries perform best after several full charge/discharge cycles. 1. Connect one end of the USB sync cable to the sync connector on your device. 2. Connect the other end of the USB sync cable to the USB port of the AC adapter. 3. Plug in the AC adapter to an electrical outlet to start charging the battery.
Getting Started Install the microSD™ card (not included) If you need more storage for your device, you can use a microSD™ card (not included) to save media and other files. 1. Pry open the rubber cover at the bottomleft side of the device. 2. Insert the microSD card with the gold contacts facing up. 3. Close the rubber cover. Tip Press the microSD card to pop it out of the slot. 1.3 Starting Up Turn your device on and off To turn on the power Press and hold the POWER button for a few seconds.
Getting Started 19 Switch your device to Sleep mode Quickly pressing the POWER button turns off the display temporarily and switches your device to Sleep mode. Sleep mode suspends your device to a low power state while the display is off in order to save battery power. Your device also automatically goes into Sleep mode when you leave the device idle after a certain amount of time. You will still be able to receive messages and calls while your device is in Sleep mode.
Getting Started Enlarged Title Bar Touch the area in the Title bar where the icons are to show the enlarged title bar. In the enlarged Title bar, touch the item to activate it. The enlarged Title bar is available in all screens. Enlarged Title Bar 1.5 The Start Menu The Start menu, located at the top left corner of the Today screen, displays a list of programs. You can start a program by scrolling through the programs list and then pressing ENTER, or by tapping a program with the stylus.
Getting Started 21 Disable Large Start menu By default, the Start menu is set to Large. You can choose to set the Start menu size to normal. 1. Tap Start > Settings > Personal tab > Large Start Menu. 2. Clear the Enable large Start menu check box. 3. Tap OK. 1.6 Quick Menu The Quick Menu, located at the top right corner of the Today screen, shows the currently running programs. You can quickly switch between running programs and stop programs when you do not need to use them.
Getting Started 1.8 HTC Home HTC Home is a Today screen plug-in that gives you up-to-date local information at a glance, such as time, day and weather information, and shows new messages and missed calls. It also has a customizable launcher where you can add your favorite applications for one-touch access and a Profile selector where you can quickly change the profile or ring tone of your device. HTC Home has four components: Home, Weather, Launcher, and Sound.
Getting Started 23 To select your city 1. Select the Weather tab ( ). 2. Tap the area that shows Select your city here. 3. On the Select City screen, type in the city namewhose weather information you want to track, then tap . You can also browse through the list of cities to choose your city. 4. Select the city on the list and tap Select. Note Downloading weather forecast data may incur additional data transfer fees from your service provider.
Getting Started • Download weather data automatically. When this check box is selected, weather information will automatically be downloaded from the AccuWeather Web site whenever you select the Weather tab, if the data has not been updated within the last three hours. Weather data will also be downloaded every time an ActiveSync connection occurs (through over-the-air or USB connection). Clear this check box if you prefer to manually download weather information. • Download when roaming.
Getting Started 25 1.9 TouchFLO™ TouchFLO™ is a special feature that gives you better touch panel experience on your device. With TouchFLO, you can simply use your finger to scroll and pan the screen. TouchFLO also features Touch Cube where you can launch messaging programs, Internet Explorer® Mobile, and more. You can also add your favorite contacts, play music, and access your pictures and videos. Note Touch Cube is displayed in portrait view only.
Getting Started Touch Cube screens There are three sides to the Touch Cube interface: • On the first side of the interface, you can add up to nine favorite contacts. If you make calls to certain people frequently, you can add them as favorite contacts for quicker access. When you have different phone numbers assigned to the same contact, an icon appears on the top left corner of the contact square to tell you which number is assigned to the particular square.
Getting Started 27 • The second side of the interface provides quick shortcuts to Live TV, Video Clips, Satellite Radio and GPS Nav. Simply touch the icons on the screen to open the corresponding program. • On the third side of the interface, you can download music and access the images and video files on your device. Touch this icon to open Windows Media Player and play back music files (For more information about using Windows Media Player, see Chapter 11.
Getting Started To use finger scrolling • Slide your finger downward to scroll up the screen. • Slide your finger upward to scroll down the screen. When finger scrolling up and down, slide anywhere within this area. • To scroll towards the left, slide your finger to the right. • To scroll towards the right, slide your finger to the left. • While the screen is scrolling, you can stop the scrolling by pressing your finger on the touch screen.
Getting Started 29 Enhanced features TouchFLO provides enhanced features when you use E-mail and Contacts applications on the device. To go to the next or previous message While reading a message, you can slide your finger across the screen to go to the next or previous message. • To go to the next message, slide your finger from right to left on the screen. • To go to the previous message, slide your finger from left to right on the screen.
Getting Started TouchFLO settings You can enable or mute the finger scrolling and panning sound. Tap Start > Settings > System tab > TouchFLO then select or clear the Enable sound when finger scrolling and panning check box. 1.10 Status Icons The following are some of the status icons that you may see on the title bar of the device.
Getting Started 31 Icons that appear in this area There are more notifications. Tap the icon to view all. New e-mail or text messages New voice mail New instant message from Live Messenger Missed call Speakerphone on Roaming Alarm Bluetooth stereo headset detected ActiveSync notification Synchronization error 1.11 Programs The following are programs that are preinstalled on your device.
Getting Started Programs screen Icon Description Games Play two pre-installed games: Bubble Breaker and Solitaire. Office Mobile Use the complete suite of Microsoft® Office applications for your mobile device. Excel Mobile Create new workbooks or view and edit Microsoft® Office Excel® workbooks. PowerPoint Mobile View Microsoft® Office PowerPoint® slides and presentations. Word Mobile Create, view, and edit Microsoft® Office Word documents.
Getting Started 33 Icon Description SelfServe Check and keep track of your mobile phone bill. Tasks Keep track of your tasks. Text Messages Retry Resend SMS messages that failed delivery. Voice Recorder Record your voice, play it back, and then send it via e-mail or Bluetooth. You can also set the recorded voice as your ring tone. Windows Live Use this mobile version of Windows Live™ to find information on the Web.
Getting Started System tab Icon Description About This is where you can see basic information such as the Windows Mobile version and type of processor used on your device. You can also specify a name for your device. Certificates See information about certificates that are installed on your device. Clear Storage Tap this icon only when you need to remove all your data and files from the memory and reset your device to factory default settings.
Getting Started 35 Connections tab Icon Description Beam Set your device to receive incoming Bluetooth signals. Bluetooth Turn Bluetooth on, set your device to visible mode, and scan for other Bluetooth devices. Comm Manager Manage your device’s connections (including Bluetooth and ActiveSync), turn the phone on or off, switch to ringer/vibration mode, enable or disable the Direct Push function, and more.
Getting Started
Chapter 2 Entering and Searching Information 2.1 Entering Information 2.2 Using the 20-key QWERTY Hardware Keyboard 2.3 Using the On-screen Keyboard 2.4 Using Touch Keyboard 2.5 Using Touch Keypad 2.6 Using Symbol Pad 2.7 Using Letter Recognizer 2.8 Using Block Recognizer 2.9 Using Transcriber 2.
Entering and Searching Information 2.1 Entering Information When you start a program or select a field that requires text or numbers, you can either use the 20-key QWERTY hardware keyboard or one of the onscreen input methods to enter information. 20-key QWERTY hardware keyboard Slide up the front panel To reveal the 20-key QWERTY keyboard, slide up the front panel of the device. Tip When dialing phone numbers, use the 20-key QWERTY keyboard.
Entering and Searching Information 39 2.2 Using the 20-key QWERTY Hardware Keyboard You can enter text, numbers, and symbols by using the 20-key QWERTY keyboard. When you select a field that requires entering text or numbers, the phone automatically selects the appropriate input mode. To change the input method, press and hold and select the input method you want to use on the menu. You can do the following with the 20-key QWERTY keyboard: • To use all uppercase letters, press twice.
Entering and Searching Information 2.3 Using the On-screen Keyboard The on-screen Keyboard is available when text entry is possible. You can enter text by tapping keys on the keyboard that are displayed on the screen. To enter text using the on-screen Keyboard 1. In a program, tap the Input Selector arrow, and tap Keyboard. 2. Enter text by tapping keys on the on-screen Keyboard. To enlarge the on-screen Keyboard 1. Tap the Input Selector arrow, then tap Options. 2.
Entering and Searching Information 41 To change Touch Keyboard and XT9 settings 1. Tap the Input Selector arrow, and tap Options. 2. In the Input Method tab, select Touch Keyboard in Input method and tap Options. You can change the keyboard layout by changing the Language. 3. Tap XT9 Settings. On the XT9 Settings screen, select the options you want and tap Done. 2.5 Using Touch Keypad The Touch Keypad is an onscreen keypad layout similar to a 12-key keypad with some additional keys.
Entering and Searching Information 2.6 Using Symbol Pad Symbol Pad provides a comprehensive list of common symbols such as parentheses, braces, currency signs, and more, as well as punctuation marks and special characters. The Symbol pad is available for both Touch Keyboard and Touch Keypad. Tap a symbol to insert it into the message. Tap to close the Symbol Pad without selecting any symbol. Tap to display the previous page of symbols. Tap to display the next page of symbols.
Entering and Searching Information 43 2.8 Using Block Recognizer With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. Note Block Recognizer is available when text entry is possible. To use Block Recognizer 1. From a program, tap the Input Selector arrow, and tap Block Recognizer. 2. Write characters, numbers, and symbols in the designated writing area. • Enter letters by writing in the abc (left) area of the box.
Entering and Searching Information 2.10 Searching Information You can search for files and other items stored in My Documents folder or on an installed storage card of your device. You can search by file name or by words located in the item. For example, you can search in e-mail messages, notes, appointments, contacts, and tasks, as well as in online Help. To search for a file or an item 1. Tap Start > Programs > Search. 2.
Chapter 3 Using Phone Features 3.1 Using the Phone 3.2 Making a Call 3.3 Receiving a Call 3.4 Smart Dialing 3.
Using Phone Features 3.1 Using the Phone Like a standard mobile phone, you can use your device to make, receive, and keep track of calls and send messages. The Phone screen From the Phone screen, you can access Call History, Speed Dial, and Phone settings. To open the Phone screen, do one of the following: • Tap Start > Programs > Phone; or • Press the TALK ������������ button. • While on the Today screen, open the keyboard and then press a numeric key.
Using Phone Features 47 Notes To adjust the conversation phone volume, you must do it during a call. Adjusting the volume at another time will affect the ring, notification, and MP3 sound levels. When you activate Vibrate mode, sound will automatically be muted and your device will vibrate when an incoming call is received. The Vibrate icon ( ) will appear in the title bar to indicate that Vibrate mode is activated.
Using Phone Features Make a call from TouchFLO To place a call to a favorite contact that you added to TouchFLO’s Touch Cube, follow these steps: 1. Open the Touch Cube by sliding your finger upward, starting from the bottom of the touch screen where it shows a logo image. (See Chapter 1 for detailed instructions.) 2. Slide your finger left or right to rotate the cube and navigate to the screen where it shows your favorite contacts. 3.
Using Phone Features 49 3.3 Receiving a Call When you receive a phone call, a message will appear, giving you the option to either answer or ignore the incoming call. To answer or reject an incoming call • To answer the call, tap Answer, or press TALK on the device. • To reject the call, tap Ignore, or press END on the device. • Open the keyboard. Note For you to be able to answer calls by opening the keyboard, the Slide keypad to answer call check box must be selected.
Using Phone Features To switch between two calls Tap Swap. To set up a conference call 1. Either put a call on hold, and dial a second number; or, accept a second incoming call when you already have one in progress. 2. Tap Menu > Conference. Note Not all service providers support conference calling. Contact your service provider for details. To turn on and off the Speakerphone The built-in Speakerphone on your device allows you to talk hands-free or lets other people listen to the conversation.
Using Phone Features 51 Tips on using Smart Dialing Smart Dialing starts looking for numbers or contacts that match the sequence you have entered. Below are some tips on how to use Smart Dialing to quickly find a desired phone number or contact. To find a phone number • Simply enter the first one or two digits to find a phone number in Call History. • Enter the first three digits or more if you want to find a phone number from the saved contacts on your device.
Using Phone Features 3.5 Additional Dialing Information Make an emergency call Enter the international emergency number for your locale, and press the TALK button on your device. Tip Additional emergency numbers may be included in your SIM card. Contact your service provider for details. Make an international call 1. Press and hold on the hardware keyboard (or tap and hold the number 0 key on the phone screen) until the + sign appears.
Chapter 4 Setting Up Your Device 4.1 Basic Settings 4.2 Personalizing the Today Screen 4.3 Customizing Phone Services 4.
Setting Up Your Device 4.1 Basic Settings Time and date To set the time and date 1. Tap Start > Settings > System tab > Clock & Alarms > Time tab. 2. Select the correct time zone and change the date or time. Note During synchronization, the time on your device is updated with the time on your PC. To set the time and date for a different location If you visit or communicate with someone in a particular time zone often, you can select it as your visiting time zone. 1.
Setting Up Your Device 55 Device name The device name is used to identify your device in the following situations: • Synchronizing with a PC • Connecting to a network • Restoring information from a backup Note If you synchronize multiple devices with the same PC, each device must have a unique name. To change the device name 1. Tap Start > Settings > System tab > About. 2. Tap the Device ID tab. 3. Enter a name.
Setting Up Your Device To choose how to be notified about events or actions 1. Tap Start > Settings > Personal tab > Sounds & Notifications. 2. On the Sounds tab, choose how you want to be notified by selecting the appropriate check boxes. 3. On the Notifications tab, in Event, tap an event name and choose how you want to be notified by selecting the appropriate check boxes. You can choose from several options, such as a special sound, a message, or a flashing light.
Setting Up Your Device 57 • • Select Next appointment to show only the next appointment in your schedule, or Upcoming appointments to show multiple appointments. Clear the Display all day events check box if you do not want to display all-day events. For more information about using Calendar, see Chapter 6 and 8. To set options for displaying tasks on the Today screen If you have a large number of tasks, you may want to specify the kind of tasks that are displayed on the Today screen. 1.
Setting Up Your Device 4.3 Customizing Phone Services To access phone settings and services • Tap Start > Programs > Phone, then tap Menu > Options on the Phone screen; or • Tap Start > Settings > Phone. To enable optional phone services Optional phone services can be easily activated and used on your device if provided by your wireless service provider. Some of these services may not be available on your device. Contact your service provider first to ask about the availability of these services. 1.
Setting Up Your Device 59 Notes • To ensure you can always make emergency calls, do not begin your password with the digits of your local emergency number. • If you entered a hint, the hint will be displayed after the wrong password is entered five times. • Each time a wrong password is entered, the device response time gets longer until the device appears to be not responding. • If you forget your password, you can hard reset or clear the device memory.
Setting Up Your Device
Chapter 5 Synchronizing Information With Your Computer 5.1 About Synchronization 5.2 Setting Up Windows Mobile® Device Center on Windows Vista® 5.3 Setting Up ActiveSync® on Windows XP® 5.4 Synchronizing With Your Computer 5.5 Synchronizing via Bluetooth 5.
Synchronizing Information With Your Computer 5.1 About Synchronization You can take information from your computer wherever you go by synchronizing it to your device.
Synchronizing Information With Your Computer 63 Note Choose Connect without setting up your device if you only want to transfer media files, check for updates, and explore your device but not sync Outlook information. 4. Select the items you want to synchronize, then click Next. 5. Enter a device name and click Set Up. When you finish the setup wizard, Windows Mobile Device Center synchronizes your device automatically.
Synchronizing Information With Your Computer 5.3 Setting Up ActiveSync® on Windows XP® The Getting Started Disc that comes with your device contains Microsoft ActiveSync 4.5 or later. Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows systems. Note For a list of compatible Windows systems, please go to http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx. Install ActiveSync 1.
Synchronizing Information With Your Computer 65 From ActiveSync on your PC When you connect your device to your PC, ActiveSync automatically opens on your PC and synchronizes. • To manually start synchronization, click • To end synchronization before it completes, click . . Change which information is synchronized You can change the information types and the amount of information to synchronize for each type either on your device or your PC.
Synchronizing Information With Your Computer Notes • T o preserve battery power, turn off Bluetooth when not in use. • T o connect and synchronize your device with a computer via Bluetooth, your computer must have built-in Bluetooth or installed with a Bluetooth adapter or dongle. 5.
Chapter 6 Organizing Contacts, Appointments, Tasks, and Other Information 6.1 Contacts 6.2 Calendar 6.3 Tasks 6.4 Notes 6.
Organizing Contacts, Appointments, Tasks, and Other Information 6.1 Contacts Contacts Contacts is your address book and information storage for the people and businesses you communicate with. Store phone numbers, e-mail addresses, home addresses, and any other information that relates to a contact, such as a birthday or an anniversary date. You can also add a picture or assign a ring tone to a contact. From the contact list, you can quickly communicate with people.
Organizing Contacts, Appointments, Tasks, and Other Information 69 3. Touch the name of a contact to open his or her contact card. 4. On the contact card, you will see the last outgoing or incoming call as well as detailed information such as phone numbers of the contact, e-mail address, and more. To group similar contacts You can group similar contacts for easier management by assigning them to categories. 1. Create a new Outlook contact or edit an existing Outlook contact. 2. Tap Categories. 3.
Organizing Contacts, Appointments, Tasks, and Other Information 6.2 Calendar Use Calendar to schedule appointments, including meetings and other events. Your appointments for the day can be displayed on the Today screen. If you use Outlook on your PC, you can synchronize appointments between your device and PC. You can also set Calendar to remind you of appointments with a sound or flashing light, for example.
Organizing Contacts, Appointments, Tasks, and Other Information 71 View appointments By default, Calendar displays appointments in Agenda view. You can also look at your appointments in Day, Week, Month, and Year views. The highlighted hours here indicate the time of your appointments. Indicates that there is a conflict with another appointment. Tap to view appointment details. Tap to switch views. Agenda view • To see detailed appointment information in any view, tap the appointment.
Organizing Contacts, Appointments, Tasks, and Other Information 6.3 Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). You can set reminders for your tasks and you can organize them using categories. Your tasks are displayed in a task list. Overdue tasks are displayed in red. To create a task 1. Tap Start > Programs > Tasks. 2.
Organizing Contacts, Appointments, Tasks, and Other Information 73 6.4 Notes Notes helps you to quickly capture thoughts, questions, reminders, to-do lists, and meeting notes. You can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability, and send notes to others. To create a note 1. Tap Start > Programs > Notes. In the note list, tap New. 2.
Organizing Contacts, Appointments, Tasks, and Other Information 6.5 Voice Recorder Voice Recorder lets you record your voice and then quickly send it in an e-mail message, send it via Bluetooth, or set the recorded voice as your ringtone. Note Voice Recorder saves voice recordings in AMR-NB (Adaptive Multi-Rate Narrowband) format only. This is a common speech audio format used in mobile devices. To record your voice 1. Tap Start > Programs > Voice Recorder. 2.
Chapter 7 Exchanging Messages 7.1 Messaging 7.2 Text Messages 7.3 Types of E-mail Accounts 7.4 E-mail Setup Wizard 7.
Exchanging Messages 7.1 Messaging Messaging is where your text messages (SMS) and e-mails are located. When you receive new messages, you can open them from the Today screen. Simply tap the type of message that you want to open. New e-mail messages New text messages To select a messaging account Do one of the following: • Tap Start > Messaging. The Account Picker screen then appears where you can select an account.
Exchanging Messages 77 7.2 Text Messages Send text messages To compose and send a text message 1. You can select a contact either from TouchFLO’s Touch Cube or from Contacts. Select a favorite contact from TouchFLO’s Touch Cube: a. Open the Touch Cube by sliding your finger upward, starting from the bottom of the touch screen where it shows a logo image. (See Chapter 1 for detailed instructions.) b.
Exchanging Messages Notes • For more information about entering text and symbols, see Chapter 2. • If you want to know when a text message is received, before sending the message that you are composing, tap Menu > Message Options then select the Request message delivery notification check box. • To always receive a delivery notification, tap Menu > Tools > Options in the text message list, tap Text Messages then select the Request delivery notifications check box.
Exchanging Messages 79 Set up your device to synchronize Outlook e-mail with the computer If you have installed the synchronization software on your PC and created a partnership with your device, then your device is ready to send and receive Outlook e-mail. If you have not yet installed the synchronization software nor created a partnership, please do so by following the procedures in Chapter 5.
Exchanging Messages • If the outgoing e-mail server requires a different user name and password for sending e-mail, clear the Use the same user name and password for sending e-mail check box. You will be prompted to enter these information. • Tap Advanced Server Settings, then select the Require SSL check boxes if your e-mail provider uses an SSL connection for more secured e-mail. From the Network connection list, select the data connection that you use for connecting to the Internet.
Exchanging Messages 81 Note Tap Review all download settings to select download options, set the e-mail format as HTML or plain text, and more. For more information, see “To customize download and format settings." 9. Tap Finish. 7.5 Using E-mail After setting up e-mail accounts on your device, you can start sending and receiving e-mail messages. Create and send messages To compose and send a message 1. You can select a contact either from TouchFLO’s Touch Cube or from Contacts.
Exchanging Messages Tips • T o set the priority, tap Menu > Message Options. • I f you are working offline, e-mail messages are moved to the Outbox folder and will be sent the next time you connect. To add an attachment to a message 1. In the message that you are composing, tap Menu > Insert and tap the item you want to attach: Picture, Voice Note, or File. 2. Select the file you want to attach, or record a voice note.
Exchanging Messages 83 To download an attachment An attachment appears below the subject of the message. Tapping the attachment opens the attachment if it has been fully downloaded or marks it for download the next time you send and receive e-mail. Notes • I f there are multiple attachments in the message, all attachments are downloaded. • F or information about setting your device to automatically download file attachments, see "Customize e-mail settings".
Exchanging Messages Tip You can also manually synchronize anytime by tapping Sync in ActiveSync or Menu > Send/Receive in Outlook Mobile. To send and receive e-mail for an Outlook account 1. Connect your device to your PC using the USB cable or Bluetooth. Otherwise, connect wirelessly if you are synchronizing Outlook e-mail with the Exchange Server. For more information, see Chapter 8. 2. Synchronization automatically begins, and your device sends and receives Outlook e-mail.
Exchanging Messages 85 To automatically receive attachments on IMAP4 e-mails 1. Tap Start > Messaging. 2. Tap Menu > Options. 3. Tap the name of your IMAP4 account. 4. Keep tapping Next until you see the Download attachments item on the screen. 5. Select a download size from the Download attachments smaller than list box. 6. Tap Finish. To store attachments on a storage card 1. Tap Start > Messaging. 2. Tap Menu > Options > Storage tab. 3.
Exchanging Messages
Chapter 8 Working With Company E-mail and Meeting Appointments 8.1 Synchronizing Your Device with the Exchange Server 8.2 Working With Company E-mail 8.3 Managing Meeting Requests 8.4 Finding Contacts in the Company Directory 8.
Working With Company E-mail and Meeting Appointments 8.1 Synchronizing Your Device with the Exchange Server To keep up-to-date with your company e-mail while you’re out of the office, you can connect your device to the Internet wirelessly and synchronize it with your company’s Exchange Server. You can also access your company addressbook anytime. Your company must have a mail server that is running Microsoft Exchange Server with Exchange ActiveSync.
Working With Company E-mail and Meeting Appointments 89 8.2 Working With Company E-mail Your device gives you instant access to your company e-mail and lets you manage your messages easier. Direct Push, Fetch Mail, Remote e-mail search, and e-mail flags are just some of the tools you can use to manage your e-mails. Note Some messaging features depend on the Microsoft Exchange Server version used in your company. Please check with your network administrator for the availability of these features.
Working With Company E-mail and Meeting Appointments Instant download through Fetch Mail The Fetch Mail feature downloads an entire e-mail immediately without the need for you to perform a full Send/Receive action. This limits the download to just the e-mail message that you want and helps save data cost. Requirement F etch Mail works for your device only if your company is using Microsoft Exchange Server 2007 or higher. 1. Tap Start > Messaging > Outlook E-mail. 2. Tap an e-mail message to open it.
Working With Company E-mail and Meeting Appointments 91 To flag or unflag message 1. Tap Start > Messaging > Outlook E-mail. 2. Select a message or open a message. 3. Tap Menu > Follow Up and select one of the following options: Note • Set Flag Mark the message with a red flag to indicate that it needs follow up. • Complete Flag Mark the message with a check mark to indicate that the issue or request in the e-mail is already completed. • Clear Flag Remove the flag to unmark the message.
Working With Company E-mail and Meeting Appointments 3. Choose whether or not to edit your response e-mail before sending then tap OK. 4. If you accepted the meeting request, it will automatically be added as an appointment in Calendar on your device. To view the list of meeting participants 1. Tap Start > Calendar. 2. Tap a meeting request that you previously sent, then tap Attendees. The list of required and optional attendees will be listed.
Working With Company E-mail and Meeting Appointments 93 • In a new meeting request using Calendar, tap Attendees and then tap Company Directory at the top of the list. 3. Enter the part or full contact name and tap Search. In the search results list, tap a contact to select it. Notes • Y ou can save a contact from the Company Directory to your device by selecting the contact then tapping Menu > Save to Contacts.
Working With Company E-mail and Meeting Appointments To individually sign and encrypt a new message 1. Tap Start > Messaging > Outlook E-mail. 2. Tap Menu > New to create a new message. 3. Tap Menu > Message Options. 4. From the Security list, select whether to encrypt only, sign the message only, or do both. 5. Tap OK. To verify the digital signature on a signed message you receive 1. Open the Outlook e-mail message that has been digitally signed. 2.
Working With Company E-mail and Meeting Appointments 95 Set Permissions on an E-mail Message Another way of protecting your e-mail messages is to send messages with restricted permissions using Information Rights Management (IRM). Note This works only with a Microsoft Outlook e-mail account and if your company is using RMS Server SP1. 1. Tap Start > Messaging > Outlook E-mail. 2. Create a message, and then tap Menu > Message Options. 3.
Working With Company E-mail and Meeting Appointments
Chapter 9 Working With Documents and Files 9.1 Microsoft® Office Mobile 9.2 Adobe® Reader® LE 9.3 Copying and Managing Files 9.
Working With Documents and Files 9.1 Microsoft® Office Mobile Microsoft® Office Mobile consists of the following applications: • Microsoft® Office Excel® Mobile lets you create and edit Excel workbooks and templates on your device. • Microsoft® Office OneNote® Mobile lets you create notes with text, photos, and voice recordings for synchronization later with Microsoft® Office OneNote® 2007 on your computer.
Working With Documents and Files 99 • Tap tap to move to the previous page; tap to jump to the last page. to move to the next page. Tap to jump to the first page; • Tap Tools > Go To to select the desired page to view. To search for text in the document 1. Tap Tools > Find > Text or tap on the toolbar. 2. Type in the text to be searched, then tap Find. 3. The matched text in the document will be highlighted. 4. To search for the next occurrence of the text, tap Tools > Find > Next.
Working With Documents and Files Use File Explorer File Explorer lets you browse the contents of folders on your device. The root folder on the device is named My Device. My Device is similar to My Computer on the PC and contains the My Documents, Program Files, Temp, Storage Card, and Windows folders, among others. To use File Explorer 1. Tap Start > Programs > File Explorer. 2. Tap a folder or file to open it. 3. To return to an upper level folder, tap the Down arrow ( ) and select the folder. 4.
Working With Documents and Files 101 3. Tap Menu > Action > Extract. 4. Choose a folder in which files will be extracted to, then tap Extract. To create a zip archive 1. Tap File > New Archive. 2. On the Save As screen, enter a zip file name and choose a folder in which to save the zip file. You can also choose whether the zip file will be saved on the device’s main memory or a storage card. 3. Tap Save. 4. Tap Menu > Action > Add. 5. Double-tap the folder that contains the files you want to archive. 6.
Working With Documents and Files
Chapter 10 Getting Connected 10.1 Comm Manager 10.2 Connecting to the Internet 10.3 Internet Explorer® Mobile 10.4 Windows Live™ 10.5 Bluetooth 10.6 Using Your Device As a Modem (Internet Sharing) 10.
Getting Connected 10.1 Comm Manager Comm Manager acts like a central switch that lets you enable or disable phone features as well as manage your data connections easily. To open Comm Manager Tap Start > Settings > Connections tab > Comm Manager. Airplane Mode Tap to switch on or off. Turning on Airplane mode turns off the phone and Bluetooth functions. For more information, see "Airplane Mode" in Chapter 3. Bluetooth Tap to switchon or off.
Getting Connected 105 3. Do one of the following: Tip • To use the displayed page as the Home page, tap Use Current. • To use the default Home page, tap Use Default. To go to your Home page, tap Menu > Home. To transfer favorites from your PC You can transfer the favorites you have stored on your PC to your device by synchronizing the Internet Explorer favorites on your PC with your device. 1. In ActiveSync on your PC, on the Tools menu, click Options, and select Favorites. 2.
Getting Connected To save a picture from a Web page 1. In Internet Explorer Mobile, tap and hold the picture, and tap Save Image. 2. Do one of the following: • To save the picture in My Pictures on your device, tap Yes. • To save the picture in another location, such as a storage card, tap Save As. To delete temporary Internet files Your device temporarily stores Web pages that you frequently visit or have visited recently to speed up the display of these Web pages when you access them.
Getting Connected 107 To set up Windows Live for the first time 1. Tap Start > Programs > Windows Live. 2. Tap Sign in to Windows Live. 3. On the next screen, tap the links to read the Windows Live™ Term of Use and the Microsoft Privacy Statement. After reviewing them, tap Accept. 4. Enter your Windows Live™ Mail or Hotmail address and password, select the Save password checkbox, then tap Next. 5. Choose whether or not to show Windows Live™’s search bar and applications on the Today screen then tap Next.
Getting Connected Windows Live Messenger With this mobile version of Windows Live Messenger, you enjoy many of the same cool features that you get from the desktop version, which include the following: • Instant messaging via text and voice • Multiple conversations • Add emoticons • Contact list with presence • Send and receive files including photos • Change status/display name • View contacts by online status, groups, and more • Send messages even when a contact is offline Note Befor
Getting Connected 109 To add a Windows Live contact in Live Messenger 1. Tap Menu > Add new contact. 2. Enter the e-mail address of the contact then tap OK. To add a Windows Live contact in Contacts 1. Tap Start > Contacts. 2. Tap New then tap Windows Live. 3. In the IM box, enter the e-mail address of the contact, which can be a Windows Live ID or any other e-mail address. Tip You can fill in other information about the contact, if desired.
Getting Connected 5. Tap Next. 6. Wait for the paired device to accept the partnership. The receiving party needs to enter the same passcode that you specified. 7. The name of the paired device is then displayed. You may edit and enter a new name for that device. 8. Select the check boxes of services that you want to use from the paired device. 9. Tap Finish. Note Creating a Bluetooth partnership between two devices is a one-time process.
Getting Connected 111 Beaming information using Bluetooth You can beam information, such as contacts, calendar items, and tasks, as well as files from your device to your computer or to another Bluetooth-enabled device. Note If your computer does not have built-in Bluetooth capability, you need to connect and use a Bluetooth adapter or dongle on your computer. To beam information from your device to a computer 1. Turn on Bluetooth on your device, and make your device visible.
Getting Connected To enable Bluetooth Explorer and Bluetooth file sharing on your device 1. Tap Start > Settings > Connections tab > Bluetooth > FTP tab. 2. Select the Enable Bluetooth Explorer check box. This makes the \Bluetooth device folder visible in the File Explorer. 3. Select the Enable File Sharing check box. You can use the default Bluetooth shared folder, or tap Browse to use another folder as your shared folder.
Getting Connected 113 To print a message 1. Tap Start > Messaging and then select the messaging account where the message you want to print is located. 2. Select the message you want to print. 3. Follow steps 2 to 5 in the “To print contact information” procedure. To print a JPEG file 1. Do one of the following: • In Pictures & Videos, select the JPEG file and then tap Menu > Print via Bluetooth. • In File Explorer, tap and hold the JPEG file and then on the menu, tap Print via Bluetooth. 2.
Getting Connected To use your device as a Bluetooth modem For the computer to use the Internet connection of your device, activate Internet Sharing on your device, and then set up a Bluetooth Personal Area Network (PAN) between the computer and your device. 1. On your device, turn on Bluetooth and set it to visible mode. 2. Initiate a Bluetooth partnership from your device by following the steps in “To create a Bluetooth partnership“ in this section. 3. Tap Start > Programs > Internet Sharing. 4.
Getting Connected 115 Subscribe to and organize news channels You must subscribe to news channels before you can receive RSS feeds. To subscribe to news channels 1. Tap Start > Programs > RSS Hub, then tap Continue. 2. In the New Channel Wizard screen, select the Choose from a list of known Channels option, then tap Next. A list of RSS channels is displayed. Category Channels Tap to load pre-selected RSS channels.
Getting Connected Manage channel categories To view all the channels in a particular category, tap All Categories in the upper left area of the channel list, then tap the category you want to display. To add a new category, tap Menu > Categories in the channel list to display all categories, then tap Menu > New. To rename or delete a category, tap Menu > Categories in the channel list to display all categories, select a category, then tap Menu > Rename or Menu > Delete.
Getting Connected 117 To download, play, or save podcasts 1. When you see an audio or video file attachment in the news summary, do one of the following to download the file: • Tap Menu > Podcasts > Start Download. • Tap the Download audio/Download video link below the audio/video file icon. Tip To cancel the file download, tap Menu > Podcasts > Cancel Download, or tap Cancel download below the audio/video file icon. 2.
Getting Connected
Chapter 11 Experiencing Multimedia 11.1 Camera 11.2 Camera Album 11.3 Pictures & Videos 11.4 Windows Media® Player Mobile 11.
Experiencing Multimedia 11.1 Camera Taking photos and recording video clips along with audio are easy with your device’s built-in camera. To open the Camera screen CAMERA button • Press the CAMERA button on your device; or • Tap Start > Programs > Camera. The screen orientation automatically switches to landscape mode when you open Camera. To exit the Camera Tap the Exit icon ( ) on the Camera screen.
Experiencing Multimedia 121 File formats supported Using the available capture modes, the camera in your device captures files in the following formats: Capture type Format Still image / Contacts Picture / Panorama / Sports / Burst JPEG Video H.263+AMR-NB(.3gp), MPEG4+AMR-NB(.mp4), MPEG4+QCELP(.3g2) Camera controls • Press CAMERA or ENTER to take a photo or contacts picture. • Press CAMERA or ENTER to start recording video; press it again to stop recording.
Experiencing Multimedia 10 Picture Theme mode 8 9 Sports mode 8 Template Selector icon. In Picture Theme mode, tap to toggle among the different templates. 9 Progress indicator. In Picture Theme, Sports and Burst modes, this shows the number of consecutive shots. 10 Exit. Tap to exit the Camera program. Zooming Before capturing a still image or a video clip, you can zoom in to make the object in focus move closer or zoom out to make the object move farther away.
Experiencing Multimedia 123 Quick Settings Panel The Quick Settings Panel provides a quick way of adjusting the most common camera settings. Tap on the screen to open the Quick Settings Panel. Keep tapping a button on the panel, for instance, Resolution, to cycle through the available settings. Note The available settings on the menu depend on the Capture mode selected. 1 5 2 4 3 1 Resolution. Available resolutions include: . See the table in the previous page for the detailed capture sizes.
Experiencing Multimedia Camera settings Tap the Menu icon ( ) to open the Camera Settings screen. The Camera Settings screen allows you to configure capture and camera settings. The Camera settings consist of two tabs: Capture Settings and Advanced. Use the Capture Settings tab to adjust options for your selected capture mode. Use the Advanced tab to set the Camera program preferences. You can either tap onscreen or press the Navigation Control buttons to navigate the Camera Settings screen.
Experiencing Multimedia 125 Advanced tab The available options in this tab depend on the capture mode selected. • Capture Format. Select the desired file format. • Shutter Sound. Choose whether or not you want the camera to make a shutter sound when you press the ENTER or CAMERA button. • Shoot Option. The camera comes with an auto-focus feature that is activated when the CAMERA or ENTER button is pressed.
Experiencing Multimedia If you set the Camera to save captured photos to a storage card, the prefix cannot be selected. Captured photos will be named using the convention IMAGnnnn.jpg (where 'nnnn' is the counter) which is the DCIM (Digital Camera Images) naming standard, and will be saved to the \DCIM\100MEDIA folder on the storage card. • Counter. To reset the file naming counter back to 1, tap Reset. • Recording Limit (Video mode only). Set the duration or file size for recording video.
Experiencing Multimedia 127 Touch to go to the Camera program Opened from a video capture mode Tip Opened from a still image capture mode If you have a lot of images in your device, scroll up or down by sliding your finger upward or downward on the touch screen. To view an image On the main Camera Album screen, touch the thumbnail of the image you want to view. While viewing the image, you can zoom in or rotate the image. To learn how to zoom and rotate the image, see the succeeding procedures.
Experiencing Multimedia To rotate the image 1. View the image you want to rotate. 2. With your finger, make a half-circle motion on the screen. To zoom in or out of an image With your finger, make a full-circle motion on the screen. • Slide your finger clockwise to zoom in; or • Slide your finger counter-clockwise to zoom out. Tips • When you zoom in on an image, you can double tap the screen to automatically zoom out and fit the image to the screen.
Experiencing Multimedia 129 To play back video files On the main Camera Album screen, touch the thumbnail of the video file you want to play back. Windows Media Player then plays back the file. Tip You can also select the video file and tap Play to play back the file in Windows Media Player. To close Camera Album and go to the Camera program Go back to the main Camera Album screen and touch or .
Experiencing Multimedia To view pictures Down arrow 1. The images in the My Pictures folder appear as thumbnails by default. 2. Select a picture and tap View. If you cannot find a picture in the default My Pictures folder, go to another folder by tapping the Down arrow ( ). GIF animation icon Tap to view the selected image. To play GIF animation files 1. Select a GIF animation file (marked with a icon) and tap View. 2. The GIF Animation program then opens and plays the animation.
Experiencing Multimedia 131 • To crop a picture, tap Menu > Crop. Next, tap and drag to select the area to crop. Tap inside the box to crop, or tap outside the box to cancel cropping. • To adjust the brightness and contrast levels of a picture, tap Menu > Auto Correct. Note To undo an edit, tap Menu > Undo. To cancel all unsaved edits you made to the picture, tap Revert to Saved. 11.
Experiencing Multimedia About the screens and menus Windows Media® Player Mobile has three primary screens: • Playback screen. The screen that displays the playback controls (such as Play, Pause, Next, Previous, and Volume) and the video window. You can change the appearance of this screen by choosing a different skin. • Now Playing screen. The screen that displays the Now Playing playlist. This special playlist indicates the current file being played and any files that are “queued up” to play next.
Experiencing Multimedia 133 Playlists and Library List Content List Sync List Play media Use the Library to find and play songs, videos, and playlists that are stored on your device or removable storage card. To update the Library 1. If you are not on the Library screen, tap Menu > Library. 2. On the Library screen, tap the Library arrow (near the top of the screen), then tap the media storage that you want use, for example, Storage Card. 3.
Experiencing Multimedia 6. Enter the playlist name then tap Done. 7. To play back the playlist you created, tap My Playlists in the Library, select your playlist, then tap Play. 6. Enter the playlist name then tap Done. 7. To play back the playlist you created, tap My Playlists in the Library, select your playlist, then tap Play. Troubleshooting If you encounter a problem while using the Windows Media® Player Mobile, a number of resources are available to help you troubleshoot the issue.
Experiencing Multimedia 135 To apply a preset 1. Select the Equalizer check box to enable the equalizer. 2. Tap the Equalizer drop-down menu, then select a desired preset. To create a custom equalizer preset 1. Select the Equalizer check box to enable the equalizer. 2. Tap . 3. Adjust the frequency bands to your desired values by dragging the equalizer controls. The selected values are indicated on top of the sliders. 4. Save your equalizer settings as a preset by tapping Menu > Save as Preset. 5.
Experiencing Multimedia
Chapter 12 Managing Your Device 12.1 Adding and Removing Programs 12.2 Using Task Manager 12.3 Resetting Your Device 12.4 Managing Memory 12.5 Windows Update 12.
Managing Your Device 12.1 Adding and Removing Programs Before you purchase additional programs for your device, make sure that they are compatible with your device. To add programs 1. Download the program to your PC (or insert the CD or disk that contains the program into your PC). You may see a single *.exe file, a *.zip file, a Setup.exe file, or several versions of files for different device types and processors. Be sure to select a program designed for your device and processor type. 2.
Managing Your Device 139 To close running programs from the Task Manager 1. Tap the Running tab. 2. Do one of the following: • Select the check box of the programs that you want to close, and then tap Stop Selected to close them. • Tap Stop All to close all programs in the list. • Tap Menu > Stop All but Selected to close all programs except for those whose check boxes are selected. Tip You can also close running programs from the Quick Menu on the Today screen. See "Quick Menu" in Chapter 1 for details.
Managing Your Device Hard reset You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings ‑ the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.
Managing Your Device 141 • In Internet Explorer Mobile, delete temporary Internet files and clear history information. For more information, see “Internet Explorer® Mobile” in Chapter 10. • Remove programs you no longer use. • Reset your device. 12.5 Windows Update You can update Windows Mobile® on your device with the latest updates, security patches or fixes, if they are available.
Managing Your Device • Adjust the backlight settings. For more information, see “To set the backlight to dim after a time delay” in Chapter 4. • Turn Bluetooth off when you are not using it. Make your device visible to other devices only when you are trying to establish a Bluetooth partnership. For more information about Bluetooth, see Chapter 10. • Lower the volume. • Close battery-intensive programs, such as the Camera, when you are done using them.
Chapter 13 Using Other Applications 13.1 Voice Command 13.
Using Other Applications 13.1 Voice Command Voice Command lets you make phone calls, open programs, play back music, get calendar information, and more, just by using your voice. It only responds to a set of predefined commands and does not allow you to record your own commands. To use Voice Command 1. Hold your device a few inches away from your mouth. 2. Press and hold the Volume Down button that is located on the upper left Press and hold side of your device.
Using Other Applications 145 To request for date and time 1. Press and hold the Volume Up button until the Microphone icon ( ) appears on the title bar. 2. In a clear voice, say “What date is it?” Voice Command then tells you the current date. 3. Press and hold the Volume Up button again, and then say “What time is it?” 4. Voice Command then tells you the current time. 13.
Using Other Applications Manage MIDlets/MIDlet suites You can organize MIDlets/MIDlet suites into folders for easy identification, renaming, updating, and more. If the device memory is full, uninstall some MIDlets/MIDlet suites to free up memory space. To create folders 1. On the Java screen, tap Menu > New Folder. 2. Enter a folder name, then tap Create. To update a MIDlet/MIDlet suite Tap and hold a MIDlet/MIDlet suite, then tap Update. Alternatively, you can tap Menu > Edit > Update.
Using Other Applications 147
Appendix A.1 Specifications A.2 Regulatory Notices A.
Appendix 149 A.1 Specifications System Information Processor Qualcomm® MSM7501A™, 528 MHz Memory - ROM : 256 MB - RAM : 160 MB DDR (Figures are the total ROM and RAM memory available for use and storage. Since the memory is shared by the Operating System, applications, and data, the actual available memory is less than what is written). Operating System Windows Mobile® 6.
Appendix Connections I/O Port HTC ExtUSB™ : 11-pin mini-USB and audio jack in one Full-speed USB 2.0 (ExtUSB is a proprietary connection interface that is trademarked by HTC.) Wireless Connections Bluetooth 2.
Appendix 151 A.2 Regulatory Notices Regulatory Agency Identifications For regulatory identification purposes, your product is assigned a model number of NEON400. FCC ID: NM8NEON400. IC: 4115A-NEON400. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your NEON400. The Battery Pack has been assigned a model number of NEON161.
Appendix The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs. M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled.
Appendix 153 The exposure standard for wireless mobile CDMA phone employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg*. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of https://gullfoss2.fcc.
Appendix Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn the phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Appendix 155 A.3 Additional Safety Information This section provides more safety information in addition to the information at the beginning of the user manual. When Driving Do Not Use The PC Functions Of Your Pocket PC While Driving Or Walking Never use the personal computer functions of your device while driving an automobile or any other moving vehicle. Always pull out of traffic and come to a stop in a legally permissible and safe location before using your device.
Appendix PACEMAKERS The Health Industry Manufacturers Association recommends that a minimum separation of six (6”) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Never come closer than six (6) inches to a person with a heart pacemaker implant when using your device.
Appendix 157 Turn your device OFF before boarding an aircraft. Always request and obtain prior consent and approval of an authorized airline representative before using your device aboard an aircraft. Always follow the instructions of the airline representative whenever using your device aboard an aircraft, to prevent any possible interference with airborne electronic equipment.
Appendix Battery Safety Your device uses a removable and rechargeable lithium ion battery. Please contact customer service for assistance should you need a replacement battery. DOs • Only use the battery and charger approved by the manufacturer. • Only use the battery for its original purpose. • Try to keep batteries in a temperature between 41°F (5°C) and 95°F (35°C). • If the battery is stored in temperatures above or below the recommended range, give it time to warm up or cool down before using.
Appendix 159 Never allow any liquids or water to spill on an AC adapter/charger when it is connected to an AC power source. Always use the authorized AC adapter/charger to avoid any risk of bodily injury or damage to your cellular phone or battery. Never attempt to connect or disconnect the AC adapter/charger with wet hands. Always unplug the AC adapter/charger from the power source before attempting any cleaning.
Index Symbols 3D sound 134 A A2DP 110 ActiveSync - copy files 99 - install 64 - overview 32 - set up 64 - synchronize with Exchange Server 88 - synchronize with PC 64 Add and remove programs 138 Adobe Reader LE 32, 98 Airplane mode 104 Alarm 55 Answer/end a call 49 Appointment search 44 Attachment - add to e-mail 82 - download 83 Audio Booster 32, 134 B Backlight 54 Basic settings 54 Bass effects 134 Battery - battery information 16 - save battery power 141 Beam - via Bluetooth 111 Block Recognizer 43 Blu
Index 161 Emergency call 52 Encrypt messages 94 Equalizer 134 Excel Mobile 32, 98 Exchange Server 89 F Favorite contacts 26 Favorites (Internet Explorer) 105 File Explorer 32 Find contact - Company Directory 92 - on device 69 Finger panning 27 Finger scrolling 27 Forward e-mail 83 G Games 32 GIF animation 130 H Hard reset 140 Help 31 Help search 44 Home 22 Home page (Internet Explorer) 104 HTC Home 22 I IMAP4 79 Input methods - Block Recognizer 43 - Keyboard 40 - Letter Recognizer 42 - Symbol Pad 42 - T
Index Playback screen (Windows Media Player Mobile) 132 Play GIF animation 130 Playlists - Windows Media Player Mobile 133 Play media 133 Play videos 130 Plug-in - HTC Home 22 Podcasts 117 POP3 79 Portrait 18 PowerPoint Mobile 32, 98 Programs 31 - Audio Booster 134 - Text Messages Retry 33 Put call on hold 49 Q Quick menu 21 Quick Tasks 21 QWERTY keyboard 38, 39 R Receive call 49 Record - voice note 73 Regional settings 54 Regulatory notices 151 Reply - e-mail 83 - text (SMS) 78 Reset - clear storage
Index 163 - ActiveSync 64 - change information types 65 - via Bluetooth 65 - Windows Media Player 66, 132 - with computer 64 - with Exchange Server 88 System information 149 T Task Manager 138 Tasks 33, 72 Tasks search 44 Temporary Internet files 106 Text messages 77 Text size - Web pages 105 Text size (screen) 54 Today screen 19, 56 Touch Cube (TouchFLO) 25 TouchFLO 25, 34, 48 Touch Keypad 41 Transcriber 43 Treble effects 134 Troubleshoot - sync connection 65 - Windows Media Player Mobile 134 Turn Bluetoo
