User's Manual

Wi-Fi
To use Wi-Fi, you need access to a wireless access point or “hotspot”. The availability
and strength of the Wi-Fi signal will vary depending on objects, such as buildings or
simply a wall between rooms, the Wi-Fi signal has to pass through.
Turning Wi-Fi on and connecting to a wireless network
1. From the Home screen, press , and then tap Settings > Wireless & networks.
2. Select the Wi-Fi check box to turn Wi-Fi on. HTC Flyer then scans for available
wireless networks.
3. Tap Wi-Fi settings. The network names and security settings of detected Wi-Fi
networks are displayed in the Wi-Fi networks section.
4. If the wireless network you want to connect to is not in the list of detected
networks, scroll down the screen, and then tap Add Wi-Fi network. Enter the
wireless network settings, and then tap Save.
5. Tap the Wi-Fi network you want to connect to. If you selected an open network,
you will be automatically connected to the network.
6. If you selected a network that is secured with WEP, enter the key and then tap
Connect.
When HTC Flyer is connected to the wireless network, the Wi-Fi icon appears in
the status bar and tells you the approximate signal strength (number of bands that
light up).
The next time HTC Flyer connects to a previously accessed secured wireless network,
you won’t be asked to enter the key or other security information again, unless you
reset HTC Flyer to its factory default settings.
174 Internet connections
Internet connections
Data connection
Checking the data connection you're using
HTC Confidential