User Manual www.htc.
Please Read Before Proceeding THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S OUTER CASING. PRIVACY RESTRICTIONS Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded.
Opera® Mobile from Opera Software ASA. Copyright 1995-2008 Opera Software ASA. All Rights Reserved. YouTube is a trademark of Google, Inc. Sprite Backup is a trademark or service mark of Sprite Software. Copyright © 2001-2008, Spb Software House. All Rights Reserved. Copyright © 2008, Esmertec AG. All Rights Reserved. Copyright © 2003-2008, ArcSoft, Inc. and its licensors. All Rights Reserved. ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc.
Disclaimers THE WEATHER INFORMATION, DATA AND DOCUMENTATION ARE PROVIDED “AS IS” AND WITHOUT WARRANTY OR TECHNICAL SUPPORT OF ANY KIND FROM HTC.
Limitation of Damages TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HTC OR ITS PROVIDERS BE LIABLE TO USER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF ANY KIND, IN CONTRACT OR TORT, INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF PROFITS ARISING OUT OF, OR RELATED TO, IN ANY MANNER, OR THE DELIVERY, PERFORMANCE OR NONPERFORMANCE OF OBLIGATIONS, OR
notebook computer has an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet which is properly installed and grounded in accordance with all local codes and ordinances. SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT • Use the correct external power source A product should be operated only from the type of power source indicated on the electrical ratings label.
• Keep metal objects away so they don’t come in contact with the battery or its connectors as it may lead to short circuit during operation. • Do not use a battery that appears damaged, deformed, or discolored, or the one that has any rust on its casing, overheats, or emits a foul odor. • Always keep the battery out of the reach of babies and small children, to avoid swallowing of the battery. Consult the doctor immediately if the battery is swallowed.
NOTE: For France, Earphone (listed below) for this device have been tested to comply with the Sound Pressure Level requirement laid down in the applicable NF EN 503321:2000 and/or NF EN 50332-2:2003 standards as required by French Article L. 5232-1. • Earphone, manufactured by HTC, Model HS S300.
ROAD SAFETY Vehicle drivers in motion are not permitted to use telephony services with handheld devices, except in the case of emergency. In some countries, using handsfree devices as an alternative is allowed. SAFETY PRECAUTIONS FOR RF EXPOSURE • Avoid using your phone near metal structures (for example, the steel frame of a building). • Avoid using your phone near strong electromagnetic sources, such as microwave ovens, sound speakers, TV and radio.
NONIONIZING RADIATION Your device has an internal antenna. This product should be operated in its normaluse position to ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. Use only the supplied integral antenna.
General Precautions • Avoid applying excessive pressure to the device Do not apply excessive pressure on the screen and the device to prevent damaging them and remove the device from your pants’ pocket before sitting down. It is also recommended that you store the device in a protective case and only use the device stylus or your finger when interacting with the touch screen. Cracked display screens due to improper handling are not covered by the warranty.
• Avoid wet areas Never use the product in a wet location. • Avoid using your device after a dramatic change in temperature When you move your device between environments with very different temperature and/or humidity ranges, condensation may form on or within the device. To avoid damaging the device, allow sufficient time for the moisture to evaporate before using the device.
Contents Chapter 1 Getting Started 23 1.1 Getting to Know Your Touch Phone and Accessories...................................... 24 Left panel......................................................................................................................................24 Right panel...................................................................................................................................24 Front panel . ....................................................................
1.10 1.11 1.12 1.13 Quick Menu...................................................................................................... 46 LED Alerts......................................................................................................... 47 Adjusting the Volume...................................................................................... 48 Using your Device as a USB Drive...................................................................
Mail.................................................................................................................................................75 Internet..........................................................................................................................................76 Photos and Videos.....................................................................................................................77 Music..................................................................
5.3 5.4 5.5 5.6 Set up synchronization in Windows Mobile Device Center.................................... 104 Use Windows Mobile Device Center................................................................................ 105 Setting Up ActiveSync® on Windows® XP....................................................... 106 Install ActiveSync.................................................................................................................... 106 Set up synchronization in ActiveSync....
Filter the Inbox message list............................................................................................... 129 View and reply to messages............................................................................................... 130 Synchronize e-mails............................................................................................................... 132 Customize e-mail settings..............................................................................................
8.5 8.6 8.7 8.8 Bookmarks................................................................................................................................. 162 History......................................................................................................................................... 162 Using Streaming Media...................................................................................163 Using Windows Live™.......................................................................
11.2 11.3 11.4 11.5 11.6 On-screen controls and indicators................................................................................... 196 Menu Panel............................................................................................................................... 198 Zooming.................................................................................................................................... 199 The Review screen.......................................................
Create appointments............................................................................................................ 232 View appointments................................................................................................................ 234 Send appointments............................................................................................................... 235 12.5 Contacts.................................................................................................
21 12.16 Voice Recorder............................................................................................. 260 12.17 WorldCard Mobile........................................................................................ 262 Capture and export business card information........................................................... 263 12.18 ZIP.................................................................................................................
Clear Storage............................................................................................................................ 287 13.10 Windows Update.......................................................................................... 288 13.11 Battery Saving Tips...................................................................................... 289 Appendix 291 Index 303 A.1 Specifications...................................................................................
Chapter 1 Getting Started 1.1 Getting to Know Your Touch Phone and Accessories 1.2 Installing the SIM Card, Battery, and Storage Card 1.3 Charging the Battery 1.4 Using the Strap Holder 1.5 Starting Up 1.6 Navigating Your Device 1.7 Home Screen 1.8 Status Icons 1.9 Start Menu 1.10 Quick Menu 1.11 LED Alerts 1.12 Adjusting the Volume 1.
Getting Started 1.1 Getting to Know Your Touch Phone and Accessories Left panel Right panel VOLUME UP During a call or when playing music, press this button to increase the volume. VOLUME DOWN During a call or when playing music, press this button to lower the volume. Stylus (See “Stylus” in this chapter for details.
Getting Started 25 Front panel Hardware Keyboard See Chapter 4 for details. Touch Screen Earpiece Listen to a phone call from here. Second Camera Use this camera for video call conversations or to take a self-portrait. HOME Press to return to the Home screen. See Chapter 3 for details. BACK Press to return to the previous screen. END • Press to end a call or return to the Home screen. • Press and hold to lock the device. (See “Long Press End Key” under “Settings on your Device” in Chapter 13 for details.
Getting Started Notes When using the four buttons — HOME, BACK, TALK/SEND, and END — and the Navigation Control, please observe the following precautions: • Make sure to press on the icons of the four buttons for the best accuracy. When pressing on the Navigation Control, make sure to press the outer areas near the ENTER button for directional control. • For best results, press with your fingertip. Do not wear gloves. Back panel 3.
Getting Started 27 Top panel POWER Press to turn off the display temporarily. To turn off the power, press and hold for about 5 seconds. For more information, see “Starting Up” in this chapter. Bottom panel Microphone Reset With the stylus, press the Reset button to soft-reset the device. Sync Connector/Earphone Jack/TV Out • Connect the supplied USB cable to synchronize information or plug in the AC adapter to recharge the battery.
Getting Started Accessories The product package includes the following items and accessories: • Battery • AC adapter • Screen protector • Stereo headset • USB sync cable • Pouch • Quick Start Guide and TouchFLO 3D Guide • Getting Started and Application discs • Extra stylus 1.2 Installing the SIM Card, Battery, and Storage Card Always turn off your device before installing or replacing the SIM card, battery, and storage card.
Getting Started 29 SIM card The SIM card contains your phone number, service details, and phonebook/ message memory. Your device supports both 1.8V and 3V SIM cards. Note Some legacy SIM cards may not function with your device. You should consult with your service provider for a replacement SIM card. There may be fees for this service. To install the SIM card 1. Make sure your device is turned off. 2.
Getting Started Battery life estimates (approximations): • Standby time: Up to 367 hours for GSM Up to 462 hours for WCDMA • Talk time: Up to 419 minutes for GSM Up to 378 minutes WCDMA • Video call time: Up to 189 minutes for WCDMA Note Battery life is subject to network and phone usage. Warning! To reduce risk of fire or burns: • Do not attempt to open, disassemble, or service the battery pack. • Do not crush, puncture, short external contacts, or dispose of in fire or water.
Getting Started 31 To remove the battery 1. Make sure your device is turned off. 2. Remove the back cover. 3. The bottom right side of the battery has a protruding grip. Lift the protruding grip to remove the battery. Storage card Battery grip To have additional storage for your images, videos, music, and files, you can purchase a microSD™ card and install it into your device. To install a microSD card Insert the microSD card into the slot with its gold contacts facing down.
Getting Started 1.3 Charging the Battery New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles. To charge the battery 1. Connect the USB connector of the AC adapter to the sync connector on your device. 2. Plug in the AC adapter to an electrical outlet to start charging the battery.
Getting Started 33 1.4 Using the Strap Holder The strap holder at the bottom panel of your device allows you to attach a wrist strap, neck lanyard, or string accessory. To attach a strap, lanyard or string accessory to the strap holder 1. Remove the back cover. 2. Insert the loop of the strap, lanyard or string accessory through the strap holder hole on the back cover.
Getting Started 1.5 Starting Up After installing your SIM card and battery and charging the battery, you can now power on and start using your device. Turn your device on and off To turn on the power 1. Press and hold the POWER button for a few seconds. 2. When you turn on your device for the first time, a Quick Start Wizard guides you to set up regional settings, date and time, and password. For more information about these settings, see Chapter 13.
Getting Started 35 Auto configure the data connection settings The first time you power on your device, you will see a notification message from Connection Setup. Connection Setup automatically configures your device’s data connections, such as 3G/GPRS, WAP, and MMS, so that you do not need to enter the settings manually for your device. To automatically configure data connection settings 1. When you see the notification message from the Connection Setup, tap Yes.
Getting Started 1.6 Navigating Your Device There are different ways you can navigate and interact with the interface of your device. Finger-touch control A quick and easy way to interact with the home screen and the whole interface of your device is by touch.
Getting Started 37 The direction of swiping resembles the way you move a printed document as you are reading it. For detailed instructions, see “Finger scrolling” in Chapter 3. Slide Sliding on the touch screen also involves dragging with your finger, but you need to press and hold your finger with some pressure before you start to drag. While dragging, do not release your finger until you have reached the target position.
Getting Started Stylus You can use the stylus to navigate and interact with the touch screen. To use the stylus, pull it out from the stylus compartment at the bottom of the right panel of your device. If the backlight is off, removing the stylus automatically turns the backlight back on. The stylus is magnetic and sticks to the side when held close to the device. This prevents you from accidentally losing or misplacing the stylus.
Getting Started 39 The Navigation Control is also touch sensitive and can be used for zooming. Slide your finger clockwise around the Navigation Control to zoom in, counterclockwise to zoom out.
Getting Started 1.7 Home Screen The default home screen of the device is the TouchFLO™ 3D Home screen which allows finger-touch access to the most important functions such as contacts, text messages, e-mail, Internet, and more. For more information about using the TouchFLO 3D Home screen, see Chapter 3.
Getting Started 41 Tasks screen When you open the hardware keyboard while on the Home screen, a screen is shown letting you quickly start a task such as writing an e-mail or SMS message, creating a new appointment, opening the web browser, and more. Note If you do not have an e-mail account set up on your device, the E-mail setup wizard will open when you tap Email. 1.
Getting Started The following are some of the status icons that you may see on the device.
Getting Started 43 Icons that appear in this area GPRS available EDGE available HSPA available WCDMA/UMTS available Connected to a wireless network Connection is active Connection is not active Synchronization in progress
Getting Started Icons that appear in this area Icons that appear in this area GPRS connecting Vibrate mode GPRS in use Sound on EDGE connecting Sound off EDGE in use HSPA connecting HSPA in use WCDMA/UMTS connecting WCDMA/UMTS in use Maximum signal strength No signal Phone is turned off No phone service Searching for phone service Voice call in progress Call on hold Calls are forwarded Dialing while no SIM card is inserted No SIM card inserted Icons that appear in this area Battery charging Bat
Getting Started 45 1.9 Start Menu The Start menu, which can be opened from the top left corner of the screen, gives you access to all the programs and settings of your Windows Mobile-powered device. Touch or tap to select an item on the Start menu. Open the Start menu. Open a recently-used program. When you are on another screen, touch or tap this item to return to the TouchFLO 3D Home screen. Open a program. Access more programs. View and change settings. View Help information for the current screen.
Getting Started 1.10 Quick Menu The Quick menu, which can be opened from the top right corner of the screen, shows the currently running programs. You can quickly switch between running programs, stop programs, and see how much program memory is being used. Customize Task Manager settings. (See “Using Task Manager” in Chapter 13.) Stop all currently running programs. Touch this icon to open the Quick Menu. Shows the total percentage of program memory in use. Touch to open the Memory settings screen.
Getting Started 47 1.11 LED Alerts The buttons below the touch screen and the exterior edge of the Navigation Control which is an LED ring will light up in the following situations: Controls Light Behavior SEND button Light flashes when there is an incoming call. END button Light stays solid when there is an incoming call. Navigation Control • The LED ring shows a “breathing” white light when the battery is being charged. • The LED ring shows a solid white light when the battery is fully charged.
Getting Started 1.12 Adjusting the Volume Adjusting the system volume changes the volume level of sound notifications and audio/video playback, whereas adjusting the ring volume affects only the volume of the phone ring. The system volume and ring volume can be separately adjusted. 1. Touch the icon area in the title bar and then touch the Speaker icon ( the System Status screen. ) on 2. To switch between the Ring Volume and System Volume screens, touch Ring or System on top of the screen. 3.
Getting Started 49 Note On certain screens that do not show the volume status icon on the title bar, you need to use the VOLUME UP/DOWN buttons on the left panel of your device to adjust the volume. Also use these buttons to adjust the conversation phone volume during an ongoing call. 1.13 Using your Device as a USB Drive To easily carry media and other files with you, you can use your device’s storage card as a USB flash drive.
Getting Started
Chapter 2 Using Phone Features 2.1 Using the Phone 2.2 Voice Call 2.3 Video Call 2.4 Smart Dial 2.
Using Phone Features 2.1 Using the Phone Like a standard mobile phone, you can use your device to make, receive, and keep track of calls and send messages. The Phone screen To open the Phone screen, do one of the following: • On the Home screen, tap Phone. • Press the TALK/SEND ����������������� button. TALK/SEND button Enter your PIN Most SIM cards are preset with a PIN (personal identification number) that is provided by your wireless service provider. 1.
Using Phone Features 53 2.2 Voice Call Make a call To make a call from the Phone screen 1. On the Home screen, tap Phone. 2. Tap the keys on the keypad to enter the phone number. Tip If you tapped a wrong number, tap to erase each subsequent digit of a number. To erase the entire number, tap and hold . 3. Press the TALK/SEND ����������������������������������� button to place the call. Tip Note When in a call, use the VOLUME UP/DOWN buttons on the side of the device to adjust the phone volume.
Using Phone Features To make a call from the TouchFLO 3D Home screen Refer to Chapter 3 to learn how to make a call from the TouchFLO 3D Home screen. To make an emergency call Enter the international emergency number for your locale, and press the TALK/ SEND button on your device. Tip Additional emergency numbers may be included in your SIM card. Contact your wireless service provider for details. To make an international call 1.
Using Phone Features 55 To answer or reject an incoming call • To answer the call, tap Answer, or press the TALK/SEND button. • To reject the call, tap Ignore, or press the END button. • To mute the ringing sound without rejecting the call, tap Mute Ring. Tip You can also place your phone face down on a table to mute the ring without rejecting the call.
Using Phone Features To put a call on hold Your device notifies you when you have another incoming call, and gives you the option of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties. 1. Tap Answer to take the second call, and put the first one on hold. 2. To end the second call and return to the first call, tap End Call or press END on your device.
Using Phone Features 57 To mute the microphone during a call Tap to toggle between turning on or off the microphone. When the microphone is turned off, the mute icon appears on the screen. To open Notes while in a call Tap or pull out the stylus. To vibrate the device when the call is established You can set the device to vibrate once to alert you that the call has been established with the other party. 1. On the Phone screen, tap Menu > Options >Advanced tab. 2.
Using Phone Features To check a missed call You will see the icon in the title bar when you missed a call. To check who the caller was, do one of the following: • Tap the title bar, then tap and then tap View. • On the Phone screen, tap Menu > Call History and then tap . Call History Use Call History to check for missed calls, dialed numbers, and calls received. To open the Call History screen, tap Menu > Call History on the Phone screen.
Using Phone Features 59 Turn the phone function on and off In many countries, you are required by law to turn off the phone while on board an aircraft. To enable or disable the phone function 1. Tap Start > Programs > Comm Manager. 2. On the Comm Manager screen, tap the Phone button to enable or disable the phone function. When enabled, the ON indicator is activated. To enable or disable Airplane Mode Another way to turn off the phone function is to switch your device to Airplane Mode.
Using Phone Features 2.3 Video Call Your device lets you make video calls when you are within a 3G network coverage area. You need to use a 3G-enabled SIM card to make video calls. Make a video call Do one of the following: • On the Phone keypad, tap the phone number to call, then tap Menu > Video Call to start a video call. • From Contacts, tap and hold the desired contact, and tap Video Call. • From Call History, tap and hold the desired phone number or contact, and tap Video Call.
Using Phone Features 61 End a video call Once a video call is in progress, tap End Call to hang up. Change settings While on a video call, you can change certain settings such as the size of the image, brightness of the video image, the camera to use, and more. The following shows the Video Call screen and control buttons during an ongoing call. 5 1 2 3 4 1 Image display area. Displays your image and the other party's image, depending on the selected Swap View setting. 2 Camera.
Using Phone Features Brightness To adjust the brightness of the live image, press NAVIGATION Right to make it brighter or press NAVIGATION Left to make it less bright. When you press NAVIGATION Left or Right during a video call, a brightness bar appears on the screen. Notes • You can also tap Menu > Brightness to adjust the brightness of the live image. • You cannot adjust the brightness for a still image.
Using Phone Features 63 General tab • Show still image. Select the image you want to display when you turn off the camera. • Preset (female). Displays a female picture in place of your image. • Preset (male). Displays a male picture in place of your image. • Custom image. Lets you use an image file as your display picture.
Using Phone Features Services tab To set up further calling options for Video Call, tap the Services tab. On the Services screen, select the desired service from the list, then tap Get Settings to access its settings. 2.4 Smart Dial Smart Dial makes it easy for you to dial a phone number.
Using Phone Features 65 If the matching list is long and you want to narrow down the search further, enter another letter. Using the same example above, if you continue to tap “3” which is associated with [d, e, f ], the matching list will be narrowed down to the following names: “Ben Miller”, “George Adams”, “Carter, Ellen”, “Dixon, Allan”. Make a call or send a text message using Smart Dial 1. On the Home screen, tap Phone. 2. Begin entering the first few numbers or characters.
Using Phone Features 2.5 Setting Up Bluetooth SIM Access for Car Kit Phones Bluetooth car kits that support the SIM Access Profile (SAP) can connect to your device and access its SIM card via Bluetooth. Once a SAP connection has been established, you can download SIM contacts from your device to the car kit phone. You can also use the car kit phone to answer and make calls using your device’s SIM card.
Chapter 3 TouchFLO™ 3D 3.1 About TouchFLO™ 3D 3.2 Using the TouchFLO 3D Home Screen 3.
TouchFLO™ 3D 3.1 About TouchFLO™ 3D TouchFLO™ 3D gives you touch control over your Windows Mobile-powered device. TouchFLO 3D provides the following features: • A Home screen that allows finger-touch access to the most widely-used functions, such as People, Messages, Mail, Music, Internet, and more • Allows you to use finger gestures to navigate screens 3.
TouchFLO™ 3D 69 To switch between the tabs of the Home screen Do one of the following: • Touch or tap the desired tab on the Home screen. • Press NAVIGATION Right or Left to move to the next or previous tab. • Press and hold your finger on the active tab, then slide your finger right or left over the tabs. Release when you have selected the desired tab. Note Apply some pressure when pressing and holding on the active tab to be able to slide over the tabs.
TouchFLO™ 3D • Swipe left across the screen to move to the next tab, and swipe right across the screen to move to the previous tab. Home The Home tab displays the current date, a flip-style clock, and an Alarm icon that indicates whether the alarm is on or off. Missed calls and your upcoming calendar appointments are also shown on the Home tab. To select an item on the Home tab • Touch the item; or • Press NAVIGATION Up or Down first to navigate to the item you want to select and then press ENTER.
TouchFLO™ 3D 71 Touch the date or the flip clock to open the Clock & Alarms screen where you can set the date, time, and alarm. (See Chapter 13 for details.) Swipe upward on the screen to display the smaller digital clock and view more appointments. Touch this area to view details about missed calls in the Call History. (See Chapter 2 for details.) Home tab with flip clock One all-day appointment and up to two timed appointments can be displayed. Touch this area to create, edit or view an appointment.
TouchFLO™ 3D People On the People tab, you can add favorite contacts who you most frequently communicate with. This allows you to quickly make calls, send text messages, and send e-mails to your favorite contacts. Tip You can add up to 15 favorite contacts on the People tab. To add favorite contacts You should already have created or synchronized contacts on your device before you can add them to the People tab. 1. On the Home screen, slide your finger to the People tab. 2.
TouchFLO™ 3D 73 5. To add another favorite contact, touch the small Plus icon ( side of the screen and repeat steps 3 and 4. ) at the right To choose from your favorite contacts • Do any of the following: To flip through the contact pictures one at a time, swipe your finger up or down the screen. You can also press NAVIGATION Up or Down to flip through the contact pictures.
TouchFLO™ 3D • Tips Touch the picture of the contact on the center screen to access his or her contact card. On the contact card, you will see the last outgoing or incoming call as well as contact details such as phone numbers, e-mail address, and more. • On the People tab, touch All People to access SIM contacts and all contacts that are stored on your device. • To remove the current favorite contact, touch Menu > Remove Favorite.
TouchFLO™ 3D 75 For more information about working with SMS and MMS messages, see “Text Messages” and “MMS” in Chapter 6. Mail The Mail tab is where you send and receive e-mail messages. Including Outlook E-mail, you can add up to four POP3/IMAP4 and web-based e-mail accounts in this tab. To add an e-mail account 1. On the Home screen, slide your finger to the Mail tab. 2. If this is your first time to add an e-mail account, touch New Account on the bottom-right side of the screen. 3.
TouchFLO™ 3D • To browse through received e-mails, swipe up or down on the envelope image or press NAVIGATION Up/Down. • Touch the e-mail on the screen to open and read the message. Touch Inbox to access all e-mail messages of the currently selected account. After selecting an e-mail account, touch this icon to create and send a new e-mail message. These are your e-mail accounts. Touch an icon to select an e-mail account and view the new e-mails received in that account.
TouchFLO™ 3D 77 Photos and Videos The Photos and Videos tab lets you visually flip through your photos and video clips and view them in full screen. From this tab, you can also activate the Camera so you can take pictures and record video clips. The Photos and Videos tab displays pictures and video files from the current favorite album. By default, the Camera Shots album which stores the pictures and videos that you captured using the device camera is set as the favorite.
TouchFLO™ 3D • To transfer media files from a computer and view them on the Photos and Videos tab, copy or synchronize them to a folder under \My Device (the device memory) or \Storage Card (if a microSD card is installed). Music The Music tab allows you to visually browse through albums and music tracks and play music. The albums and music tracks that you see on the Music tab are from the Now Playing list of the Library.
TouchFLO™ 3D 79 To advance forward or backward in the music Do one of the following: • Touch and hold on the thin bar below the album art to display the progress bar: Drag your finger right or left on the progress bar to move forward or backward in the current music. • Slide your finger around the Navigation Control as follows: Slide your finger clockwise to advance forward in the music. To move backward in the music, slide your finger counterclockwise.
TouchFLO™ 3D To browse and play music in the Library The Library organizes music into categories, such as Now Playing, Artists, Albums, Genres, All Songs, and more. When you add more albums or music tracks to your device, go to the Library to locate and play the new albums or music tracks. 1. On the Music tab, touch Library to open the Library screen. 2. The tabs at the bottom of the Library screen correspond to the different categories.
TouchFLO™ 3D 81 2. Touch the first song in the playlist. The Music tab starts playing the first song. After each song, the next one in the playlist will be played. Note Playlists are not automatically updated when music files have been deleted from the device memory or storage card. There are two types of playlists that can be shown on the Playlists tab: • Custom playlists. Playlists that are created on the Music tab. • Windows Media® Player playlists.
TouchFLO™ 3D Weather The Weather tab shows you the current weather as well as weather information for the next five days of the week. To add a city The Weather tab can display weather information of your local city and other added cities. Follow the steps below to add a city on this tab. Tip You can add up to 10 cities on the Weather tab. 1. On the Weather tab, touch Menu > Add Location. 2. The Select Country screen then appears.
TouchFLO™ 3D 83 Shows the last weather update. Touch this item to download the latest weather information. Touch to see the weather information for the next five days of the week. To switch between cities, swipe your finger upward/downward, touch the Up/Down arrow on the screen, or press NAVIGATION Up/Down. Touch Menu to add or delete a city, change the temperature to Celsius or Fahrenheit, and more. To choose download options 1. On the Weather tab, touch Menu > Settings.
TouchFLO™ 3D Settings The Settings tab allows you to synchronize information with your computer or the Exchange Server, change sound settings such as the ring tone, and choose a different wallpaper for the Home tab. You can also easily turn on and off the communications features of your device such as Wi-Fi, Bluetooth, and more. Programs The Programs tab allows you to add your favorite programs for one-touch access. Touch an empty slot to add a favorite program.
TouchFLO™ 3D 85 When you have filled up the screen with programs, scroll down the Programs tab to access more empty slots and add more programs. To scroll down, press and hold on the screen and then drag your finger upward. You can add up to 18 favorite programs. To scroll back up, press and hold on the screen and then drag your finger downward. Note To replace a slot with another program, you must delete the occupying program shortcut first and then add your desired program. 3.
TouchFLO™ 3D • To auto-scroll, flick your finger upward or downward on the touch screen. Touch the screen to stop scrolling. To scroll left and right • To scroll towards the right, swipe your finger to the left. To scroll towards the left, swipe your finger to the right. • To auto-scroll, flick your finger left or right. Touch the screen to stop scrolling. Finger zooming The type of finger gesture to use when zooming varies in different programs.
Chapter 4 Entering Text 4.1 Entering Information 4.2 Using the Hardware Keyboard 4.3 Using the Full QWERTY 4.4 Using the Compact QWERTY 4.5 Using the Phone Keypad 4.6 Using Multitap and T9 Modes 4.7 Using Numeric and Symbol Mode 4.8 Using Block Recognizer 4.9 Using Letter Recognizer 4.
Entering Text 4.1 Entering Information When you start a program or select a field that requires text or numbers, you can either use the QWERTY keyboard or one of the on-screen input methods to enter information. QWERTY keyboard Your device comes with a QWERTY keyboard, which is similar to a standard keyboard on your PC. To use the keyboard, slide the screen panel to the right to reveal the keyboard. The screen orientation automatically switches to landscape mode when the keyboard is opened.
Entering Text 89 Key when pressed Input Panel (Full QWERTY) Input Panel icon Input Selector arrow Icon Notes Input method Icon Text input methods Input method Full QWERTY Letter Recognizer or Block Recognizer Compact QWERTY Transcriber Phone Keypad Keyboard • Some text input methods may not be available in certain language versions of the device. • When in landscape mode, the Compact QWERTY and Phone Keypad are not available.
Entering Text 4.2 Using the Hardware Keyboard You can do the following with the hardware keyboard: • To type lowercase letters and numbers, press the keys using your thumbs or fingers. • To use all uppercase letters, press press . To change back to all lowercase letters, again. • To use a single uppercase letter, press corresponding key.
Entering Text 91 • Press to open the Messaging program. • Press to open your SMS/MMS messaging account. • Press and hold , then press to open the T9 menu. 4.3 Using the Full QWERTY The Full QWERTY is a full on-screen QWERTY keyboard layout similar to a desktop PC keyboard. Tip You can also use the Windows Mobile on-screen keyboard which also has a QWERTY keyboard layout by selecting Keyboard (or Other Input Methods > Keyboard) on the Text input method menu. • Tap to enter letters or symbols.
Entering Text To enter text using the Full QWERTY 1. Start a program that accepts text input, such as Word Mobile. 2. Tap the Input Selector arrow, then tap Full QWERTY. 3. Start tapping keys on the keyboard as you would on a PC keyboard to enter your text. To learn how to enter text using T9 mode, see “Using Multitap and T9 Modes” in this chapter. 4.4 Using the Compact QWERTY The Compact QWERTY is a type of on-screen keyboard which features 20 keys.
Entering Text 93 Tip You can tap and hold to immediately open the numeric keyboard. To enter text using the Compact QWERTY 1. Start a program that accepts text input, such as Word Mobile. 2. Tap the Input Selector arrow, then tap Compact QWERTY. 3. Start tapping keys on the keyboard to enter your text. To learn how to enter text using Multitap or T9 mode, see “Using Multitap and T9 Modes” in this chapter. 4.
Entering Text Tip You can tap and hold to immediately open the numeric keyboard. To enter text using the Phone Keypad 1. Start a program that accepts text input, such as Word Mobile. 2. Tap the Input Selector arrow, then tap Phone Keypad. 3. Start tapping keys on the keyboard to enter your text. To learn how to enter text using Multitap or T9 mode, see “Using Multitap and T9 Modes” in this chapter. 4.
Entering Text 95 Note Navigate through the word candidate list if there are more words to choose from. To add a word to the T9 dictionary If the word that you have entered is not found in the dictionary, you can add it to the dictionary. 1. While in T9 mode, type a letter and then tap candidate list. on right side of the word 2. Type the word you want to add and then tap ADD. Tap to not add the word. To customize Touch Input settings 1. Tap the Input Selector arrow, then tap Touch Input Settings. 2.
Entering Text 4.7 Using Numeric and Symbol Mode Switch to Numeric and Symbol mode to let you easily enter numbers and common symbols such as parentheses, braces, currency signs, punctuation marks, special characters, and more. Numeric and Symbol mode is available when using the Full QWERTY, Compact QWERTY, and Phone Keypad. Tap a number or symbol to insert it into your text. Tap to go to the previous or next page of symbols. See “To lock the keyboard in Numeric and Symbol mode.
Entering Text 97 Tip In Compact QWERTY and Phone Keypad, tap / to toggle between locking the keyboard in Numeric and Symbol mode and switching back to the letter keyboard layout after tapping a symbol or number. 4.8 Using Block Recognizer With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. To use Block Recognizer 1. From a program, tap the Input Selector arrow and then tap Other Input Methods > Block Recognizer. 2.
Entering Text 4.9 Using Letter Recognizer With Letter Recognizer, you can write individual letters, numbers, and punctuation marks, which are then converted into typed text. To use Letter Recognizer 1. From a program, tap the Input Selector arrow and then tap Other Input Methods > Letter Recognizer. 2. Write characters, numbers, and symbols in the designated writing area. • Enter uppercase letters by writing in the ABC (left) area of the box.
Entering Text 99 To enter punctuation and symbols Transcriber comes with an on-screen keyboard that provides an easy way to add punctuation or a special symbol to existing text. To use this on-screen keyboard, tap on the Transcriber toolbar. The keyboard remains visible until you tap the button again. Tips • To reposition the keyboard, tap and hold the title bar, then drag to the desired location.
Entering Text
Chapter 5 Synchronizing Information With Your Computer 5.1 About Synchronization 5.2 Setting Up Windows Mobile® Device Center on Windows Vista® 5.3 Setting Up ActiveSync® on Windows® XP 5.4 Synchronizing With Your Computer 5.5 Synchronizing via Bluetooth 5.
Synchronizing Information With Your Computer 5.1 About Synchronization You can take information from your computer wherever you go by synchronizing them to your device.
Synchronizing Information With Your Computer 103 • Using Bluetooth. You must first set up a Bluetooth partnership between your device and your computer before you can synchronize information between them using Bluetooth. For more information about setting up a Bluetooth partnership, see Chapter 9. For information about synchronizing through Bluetooth, see “Synchronizing via Bluetooth” later in this chapter.
Synchronizing Information With Your Computer Set up synchronization in Windows Mobile Device Center When you connect your device to your computer and start Windows Mobile Device Center for the first time, you are asked to create a Windows Mobile partnership with your device. To create a partnership: 1. Connect your device to your computer. Windows Mobile Device Center configures itself, then opens. 2. On the license agreement screen, click Accept. 3.
Synchronizing Information With Your Computer 105 Use Windows Mobile Device Center To open Windows Mobile Device Center, click Start > All Programs > Windows Mobile Device Center on your Windows Vista computer. On Windows Mobile Device Center, you can do the following: • Click Mobile Device Settings to change synchronization settings.
Synchronizing Information With Your Computer 5.3 Setting Up ActiveSync® on Windows® XP The Getting Started disc that comes with your device contains Microsoft ActiveSync 4.5 or later. Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows systems. Note For a list of compatible Windows systems, go to http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx. Install ActiveSync 1.
Synchronizing Information With Your Computer 107 When you finish the wizard, ActiveSync synchronizes your device automatically. Notice that Outlook e-mails and other information appear on your device after synchronization. 5.4 Synchronizing With Your Computer Connect and synchronize your device with your computer using the USB cable or Bluetooth connection. Start and stop synchronization You can manually synchronize either from your device or computer.
Synchronizing Information With Your Computer Change which information is synchronized You can change the information types and the amount of information to synchronize for each type either on your device or your computer. Follow the steps below to change synchronization settings on your device. Note Before changing synchronization settings on your device, disconnect it from your computer. 1. In ActiveSync on your device, tap Menu > Options. 2.
Synchronizing Information With Your Computer 109 If this happens, tap Start > Settings > Connections tab > USB to PC, then clear the Enable advanced network functionality check box. This makes your computer utilize a serial USB connection with your device. 5.5 Synchronizing via Bluetooth You can connect and synchronize your device with the computer using Bluetooth.
Synchronizing Information With Your Computer 5.6 Synchronizing Music and Video If you want to carry your music or other digital media along with you while you travel, set up Windows Media® Player on your computer to synchronize music and video with your device. Other than selecting the Media information type to be synchronized, all media synchronization settings must be set in Windows Media® Player.
Chapter 6 Exchanging Messages 6.1 Messaging 6.2 Text Messages 6.3 MMS 6.4 Types of E-mail Accounts 6.5 E-mail Setup Wizard 6.
Exchanging Messages 6.1 Messaging Messaging is a central location where you will find all types of messaging accounts, which include text messages (SMS), multimedia messages (MMS), and e-mail accounts. To select a messaging account Do one of the following: • On the TouchFLO 3D Home screen, slide to the Mail tab and then touch Menu > Accounts > Accounts. The Account Picker screen then opens where you can select an account. Tip • You can also tap Start > Messaging to access the Account Picker screen.
Exchanging Messages 113 3. Select a messaging account in which to add a signature. 4. Select the Use signature with this account check box. 5. In the provided text box, enter the information that will be displayed as your signature. 6. If you want the signature to be added whenever you reply or forward messages, select the Use when replying and forwarding check box, then tap OK. 7. Repeat the steps to add a signature to other messaging accounts. 6.
Exchanging Messages From the Contacts screen 1. Tap Start > Contacts. 2. Tap the contact’s name to open his or her contact card. 3. Touch Send text message. Compose and send a text message After creating a new text message, follow the steps below to enter your message and then send it. 1. To add recipients, enter their mobile phone numbers in the To field, separating them with a semicolon. You can also tap To or tap Menu > Add Recipient to add mobile phone numbers from Contacts�. 2.
Exchanging Messages 115 To reply to a text message 1. In the SMS \ MMS inbox, tap a message thread to open it. 2. At the bottom of the screen, type your reply message and then tap Send. Enter your reply message here To copy a message in the thread to the SIM card 1. In the SMS \ MMS inbox, tap the message to open it. 2. Use the Navigation Up or Down control to select a message in the thread that you want to copy to the SIM card. Note You cannot copy a sent message from the thread to the SIM card. 3.
Exchanging Messages To copy a text message from the SIM card to the device 1. In the SMS \ MMS inbox, select the SIM message you want to copy. 2. Tap Menu > Copy to Phone. Note Copying SIM text messages to your device results in duplicate messages in the Inbox folder when your SIM card is in use. To delete a message in the thread 1. In the SMS \ MMS inbox, tap a message thread to open it. 2. Use the Navigation Up or Down control to select a message in the thread that you want to delete. 3.
Exchanging Messages 117 6.3 MMS Sending multimedia messages (MMS) to your friends and family is fun and easy. You can include pictures, videos, and audio clips in a multimedia message. Notes • Multimedia messaging is a charged service and has to be provisioned on your mobile phone account. Contact your wireless service provider to have MMS provisioned as part of your calling plan. • Make sure the size of MMS messages that you send is within the limits allowed by your wireless service provider.
Exchanging Messages • Gateway. Location of the MMS server, which is usually in the form of an IP address. • Port number. HTTP port number used for connecting to the MMS server and for file transfer. • Server address. URL address of the server where MMS messages are stored. • Connect via. Select the connection that your device uses for MMS messages. • Send limit. Select the maximum MMS message size allowed by your wireless service provider. • WAP version. Select either WAP 1.2 or WAP 2.
Exchanging Messages 119 3. In To, enter the recipient’s phone number or e-mail address directly, or tap To, Cc, or Bcc to choose a phone number or an e-mail address from Contacts. Note You may need to scroll up to see Cc and Bcc. 4. Enter a subject for your message. 5. Tap the Insert icon ( )to select and insert a photo or video clip. When selecting a photo or video clip, you can: • Tap Select to insert the selected photo or video clip into the MMS message you are composing.
Exchanging Messages To add text to an MMS message When you tap Insert text here on your MMS message, an empty screen appears where you can enter your text. You can insert the following types of information: Enter your own text Choose from common words or phrases from the My Text list Include a Favorites link Add an emoticon Tip Insert contact information Insert calendar appointment To edit or delete a phrase on the My Text list, tap and hold a string, then tap Edit or Delete from the shortcut menu.
Exchanging Messages 121 Note To record a new audio clip and add it to your MMS message, tap . The Record popup window then opens. Tap Record to start recording, and Stop to end the recording. Tap Play to listen to the recorded audio clip, then tap Add. The new audio clip is then inserted into your MMS message. View and reply to MMS messages To view an MMS message • Use the playback controls • , , and . Tap Contents to see a list of files included in the message.
Exchanging Messages To block a phone number from sending you MMS messages If you do not want to receive MMS messages from a particular sender, you can add the sender’s phone number to the MMS Blacklist. 1. When you receive a new MMS message, open and view the message. 2. To avoid receiving MMS messages from this sender next time, tap Menu > Show > Message Detail. 3. On the Message Detail screen, tap Menu > Show Contact Details. 4. Tap Menu > Save to Blacklist. 5. Tap Done.
Exchanging Messages 123 Set up your device to synchronize Outlook e-mail with the computer If you have installed the synchronization software on your computer and created a partnership with your device, then your device is ready to send and receive Outlook e-mail. If you have not yet installed the synchronization software nor created a partnership, do so by following the procedures in Chapter 5.
Exchanging Messages 6.5 E-mail Setup Wizard Windows Mobile’s E-mail Setup wizard walks you through the process of setting up your e-mail account. It has an Auto Setup feature which can automatically set up your e-mail account based on the e-mail address and password that you enter, if your e-mail provider settings are preconfigured on your device.
Exchanging Messages 125 4. Enter Your name and the Account display name and then tap Next. Note If the E-mail Setup wizard was unsuccessful in finding and downloading settings from the Internet, select Internet e-mail from the Your e-mail provider list on the next screen. You will be asked to enter e-mail server settings. See “To specify e-mail server settings” for details. 5.
Exchanging Messages To customize download and format settings Before you tap Finish when setting up your POP3 or IMAP4 e-mail account, you can tap the Review all download settings link at the bottom of the screen to choose download options, message format, and other settings.
Exchanging Messages 127 Set up a custom domain e-mail When you are using an e-mail domain name that is hosted by a different e-mail provider (for example, your e-mail address may be Benjamin@startup.com but Email.com hosts the e-mail account and provides e-mail services), select the Custom Domain option in the E-mail Setup wizard to set up your e-mail account on your device. 1. Add a new e-mail account. See “Add an e-mail account” for instructions. 2.
Exchanging Messages 6.6 Using E-mail After setting up e-mail accounts on your device, you can start sending and receiving e-mail messages. Create a new e-mail message Depending on your preference, there are two ways you can create a new e-mail message. To start from an empty message 1. On the TouchFLO 3D Home screen, slide to the Mail tab. 2. Select the e-mail account you want to use on the right side of the screen.
Exchanging Messages 129 Compose and send an e-mail After creating a new e-mail, follow the steps below to enter your message and then send it. 1. To add recipients, enter their e-mail addresses, separating them with a semicolon. You can also tap To if you want to add e-mail addresses stored in Contacts. 2. Enter a subject and compose your message. Tip To choose from preset messages, tap Menu > My Text and tap a desired message. To check the spelling, tap Menu > Spell Check. 3. Tap Send.
Exchanging Messages For example, entering “B”, then “E” narrows the list to only the e-mails that contain sender names and e-mail subjects that start with “BE.” View and reply to messages To download a complete e-mail By default, each e-mail received in the inbox on your device contains only the first few kilobytes of the message. When you open an e-mail, it displays only the headers and part of the message. You must download the whole e-mail to view the complete content.
Exchanging Messages 131 • Download may take some time, depending on the speed of your Internet connection, size of the whole e-mail, and whether file attachments are automatically downloaded. To download file attachments • POP3 e-mail account: File attachments of a POP3 Internet e-mail account are automatically downloaded when you download a complete e-mail. • IMAP4 and Outlook e-mail accounts: File attachments appear below the subject of an e-mail message.
Exchanging Messages Synchronize e-mails Synchronizing e-mails ensures that new e-mails are downloaded to the device Inbox folder, e-mails in the Outbox folder are sent, and e-mails deleted from the server are removed from your device. The manner in which you synchronize e-mails depends on the type of e-mail account you have. To automatically synchronize an Outlook e-mail account 1. Connect your device to your computer through USB or Bluetooth.
Exchanging Messages 133 To change the download size and format for Internet e-mail 1. Tap Menu > Options on the Account Picker screen, or tap Menu > Tools > Options while you’re in a message list. 2. Tap your POP3 or IMAP4 Internet e-mail account. 3. Tap Download Size Settings. 4. Under Message format, select HTML or Plain Text. 5. Under Download size limit, select the desired e-mail size. 6. Tap Done. To automatically receive attachments on Outlook e-mails 1. Tap Start > Programs > ActiveSync. 2.
Exchanging Messages
Chapter 7 Working With Company E-mails and Meeting Appointments 7.1 Synchronizing with the Exchange Server 7.2 Working With Company E-mails 7.3 Managing Meeting Requests 7.
Working With Company E-mails and Meeting Appointments 7.1 Synchronizing with the Exchange Server To keep up-to-date with your company e-mails and meeting schedules while you’re out of the office, you can connect your device to the Internet through Wi-Fi or a data connection and synchronize with your company’s Exchange Server. Set up an Exchange Server connection Before you can synchronize or access information on the Exchange Server, you need to set up an Exchange Server connection on your device.
Working With Company E-mails and Meeting Appointments 137 9. Select the items that you want to sync with the Exchange Server. Tips • To change synchronization settings of an information item, for example, E-mail, select the item, then tap Settings. • To change the rules for resolving synchronization conflicts, tap Menu > Advanced. 10. Tap Finish.
Working With Company E-mails and Meeting Appointments 7.2 Working With Company E-mails Your device gives you instant access to your company e-mails and lets you manage your messages easier. Direct Push, Fetch Mail, Remote e-mail search, and e-mail flags are just some of the tools you can use to manage your e-mails. Note Some messaging features depend on the Microsoft Exchange Server version used in your company. Check with your network administrator for the availability of these features.
Working With Company E-mails and Meeting Appointments 139 To turn on Direct Push in ActiveSync 1. Tap Start > Programs > ActiveSync and then tap Menu > Schedule. 2. Select As items arrive in the Peak times and Off-peak times boxes. Note When Direct Push is off, you need to manually retrieve your e-mails. Scheduled synchronization If you do not want to use Direct Push, you can set a regular schedule for synchronizing Outlook e-mail and information. 1. In ActiveSync on your device, tap Menu > Schedule. 2.
Working With Company E-mails and Meeting Appointments 3. By default, only the first few words of the message is shown. To download the whole e-mail, finger-scroll to the end of the message, then tap Get the rest of this message. 4. Wait for the remainder of the message body to download. Notes • For information about changing e-mail sync options such as setting the download size for e-mail, see "Customize e-mail settings" in Chapter 6.
Working With Company E-mails and Meeting Appointments 141 Flag your messages Flags serve as a reminder for you to follow-up on important issues or requests contained in e-mail messages. Flagging messages, which has been a useful feature on desktop Outlook E-mail, can also be done in Outlook Mobile on your device. You can flag received e-mail messages on your device. Requirement Flags are enabled only if e-mails are synchronized with Microsoft Exchange Server 2007 or higher.
Working With Company E-mails and Meeting Appointments Out-of-office auto-reply Outlook Mobile allows you to retrieve and change your out-of-office status. Just like desktop Outlook E-mail, Outlook Mobile automatically sends an autoreply message when you’re not available. To send out-of-office auto-reply messages 1. Tap Start > Messaging > Outlook E-mail. 2. Tap Menu > Tools > Out of Office. 3. In the I am currently list, select Out of the Office. 4. Enter your auto-reply message, then tap Done. 7.
Working With Company E-mails and Meeting Appointments 143 • If the time of the meeting conflicts with your other appointments, a “Scheduling Conflict” status appears on top of the e-mail. 3. Choose whether or not to edit your response e-mail before sending, then tap OK. If you accepted the meeting request, it will automatically be added as an appointment in Calendar on your device. To view the list of meeting participants 1. Tap Start > Calendar. 2.
Working With Company E-mails and Meeting Appointments • To view an attendee’s contact information, tap the attendee’s name. If the attendee is included in your contacts list, you will see the contact information immediately. If the attendee is not in your contacts list, tap Company Directory to view the contact information. 7.4 Finding Contacts in the Company Directory In addition to having contacts on your device, you can access contact information from your organization’s Company Directory.
Working With Company E-mails and Meeting Appointments 145 • When creating a meeting request and selecting required and optional attendees in Calendar, tap Company Directory. 3. Enter a partial or full contact name and tap Search. In the search results list, tap a contact to select it. Notes • You can save a contact from the Company Directory to your device by selecting the contact, then tapping Menu > Save to Contacts.
Working With Company E-mails and Meeting Appointments
Chapter 8 Internet 8.1 Ways of Connecting to the Internet 8.2 Starting a Data Connection 8.3 Using Opera Mobile™ 8.4 Using YouTube™ 8.5 Using Streaming Media 8.6 Using Windows Live™ 8.7 Using Your Device as a Modem (Internet Sharing) 8.
Internet 8.1 Ways of Connecting to the Internet Your device’s networking capabilities allow you to access the Internet or your corporate network at work through one of the following connections: • Wi-Fi • GPRS, 3G or EDGE • Dial-up Note You can also add and set up the following connections: • VPN: A VPN connection is used to access your corporate network by using an existing Internet connection.
Internet 149 To connect to a wireless network After Wi-Fi is turned on, your device scans for available wireless networks in your area. 1. The network names of the detected wireless networks are displayed on a pop-up message window. Tap the desired wireless network, then tap OK. Note When you select an open (unsecured) network, you will be automatically connected to the network after tapping OK. You do not need to do steps 2 and 3. 2.
Internet To check wireless network status You can check the current wireless connection status from any of the following screens of your device: • Title bar. When you enable Wi-Fi on your device, the Wi-Fi ON icon title bar. appears on the After Wi-Fi is turned on, your device scans for available wireless networks and the wireless signal icon appears on the title bar. The arrows in this icon move back and forth while your device is scanning for a wireless network signal.
Internet 151 • Configure Wireless Networks screen. On the Home screen, slide to the Settings tab and then tap All Settings. In the Connections tab, tap Wi-Fi. This screen displays the wireless networks currently available. To connect to a wireless network in the list, tap and hold on the desired network, then tap Connect. Tap a wireless network in the list to view or change its connection settings. You can also add new wireless networks, if available, by tapping Add New.
Internet GPRS/3G Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send and receive e-mail and picture messages on your device. You will need a data plan to use your wireless service provider’s GPRS/3G network. Check with your wireless service provider to find out about GPRS/3G rates. GPRS/3G settings are already preconfigured on your device, and your device is ready to use your wireless service provider’s GPRS/3G services.
Internet 153 6. Enter the Access point name, then tap Next. 7. Enter the user name and password, if required, then tap Finish. Notes • To view help information for any screen, tap the help icon ( ). • To modify your connection settings, tap Manage existing connections and then tap Edit. Dial-up To set up a dial-up connection to your Internet Service Provider (ISP) on your device, you need the same settings that you normally use when you dial up from your computer.
Internet 8.2 Starting a Data Connection After setting up a data connection such as GPRS/3G or ISP dial-up on your device, you can now connect your device to the Internet. The connection is started automatically when you begin using a program that accesses the Internet such as Opera Mobile. To manually start a data connection If you have set up multiple types of data connections on your device, you can manually start a connection. 1.
Internet 155 1 8 2 3 4 5 6 7 9 1 Refresh. Tap to reload the web page being viewed. 2 Address bar. Enter the URL of the web site here. 3 Back. Tap to go back to the previous web page viewed. 4 Bookmarks. Tap to go to the Bookmarks screen where you can add a bookmark, edit bookmarked web pages, and send the favorite URL link via one of the Messaging accounts. 5 Tabs. Tap to add a new browsing tab or switch to another existing browsing tab. 6 Home. Tap to go to the Home page. 7 Menu.
Internet To go to a web site 1. On the Opera Mobile screen, tap the address bar. 2. Enter the URL address and tap . Address bar Search field Tip When you tap the address bar, a search field also appears. Quickly search the web by entering the search item and tapping . View web pages While browsing web pages, use finger gestures to pan and zoom on the web page. To zoom in, tap your finger twice on the screen. To zoom out, tap your finger twice on the screen again.
Internet 157 Opera Mobile menu On the menu bar, tap to open the menu. Tap to open the Settings screen where you can set the default home page, change display settings, set privacy settings, and more. Tap to view items being downloaded. You can also resume or stop current downloads. Tap to view information about the Web page you are browsing. Tap to see web pages that you have viewed. Tap to manage and view web pages that you have saved. Tap to open the Opera Mobile help file.
Internet 8.4 Using YouTube™ YouTube™ lets you browse, search, and watch video clips from the YouTube server. Note You need an active connection to use YouTube. If you are using a GPRS/3G connection, your data connection bill may increase significantly due to large file sizes of the videos. To open YouTube Tap Start > Programs > YouTube. Tap to open the Program Displays the current program Guide list. The Program channel being viewed.
Internet 159 To add a new program channel into the Program Guide list 1. On the YouTube screen, tap . 2. On the Search screen, enter the channel you want to add to the Program Guide list. 3. Tap Search. YouTube searches for the channel and then displays the available videos from it. 4. Tap and then on the confirmation screen, tap OK. The channel you just subscribed to will now be shown when you tap Program Guide. Tip You can also add a YouTube user as a program channel.
Internet Watching videos On the Videos, Bookmarks, or History screen, tap a video to launch the YouTube Video Player. Drag to go forward or backward in the video. Download progress Buffered video Tap to go back to the beginning of the video. . Tap to toggle between playing and pausing the video. Tip Tap to stop the video playback. Tap to resize the video to fit the screen. Tap again to go back to actual size. To adjust the volume, press the VOLUME CONTROLS on the side of the device.
Internet 161 Playback Controls This control Does this ENTER Toggle between playing and pausing video playback. NAVIGATION Right (Landscape orientation) Press and hold to go forward in the video. NAVIGATION Left (Landscape orientation) Press and hold to go back in the video VOLUME CONTROL Press to adjust the volume. When you tap Stop ( ) or finish watching the entire video, you are presented with options on what you can do next. Tap to go to the next page of related videos.
Internet Bookmarks You can store frequently viewed videos into Bookmarks for quick access. To view Bookmarks On the YouTube screen, tap . Tap a video to watch it. To add a video into Bookmarks Do one of the following: • After watching a video, tap • On the list of videos, tap on the video you want to add to Bookmarks and then tap . . To delete a video from Bookmarks 1. On the Bookmarks screen, tap Edit. 2. Tap on the video you want to remove from Bookmarks. 3.
Internet 163 8.5 Using Streaming Media Streaming Media lets you stream live broadcasts or on-demand media content from the web. The media is sent in a continuous stream to your device and is played as it arrives, along with the audio. The Streaming Media program allows you to play 3GP and MPEG-4 files. It also supports playback of SDP (Session Description Protocol) files.
Internet Rewind Drag to go backward or forward on the video. Tap to toggle between playing or pausing the video playback. Tap to switch to full screen mode. In full screen mode, tap the screen to switch back. Fast forward To stream media files directly on the Streaming Media Player Streaming Media only supports RTSP links when you stream *.3gp and *.mp4 files directly on the program. Note Before you launch the Streaming Media program, make sure that you are connected to the Internet. 1.
Internet 165 To configure streaming video connection settings Tap Menu > Options to configure the following settings: • Connect via. Choose whether you want to connect to the Internet or corporate network (intranet) to locate a streaming video clip. • UDP port range. Specify a range of port numbers to use for streaming. • Media buffer. Specify the memory space (in terms of duration) to allot for storing video and audio data while streaming media. 8.
Internet 3. Enter your Windows Live™ Mail or Hotmail address and password, select the Save password checkbox, then tap Next. 4. Tap Next. 5. Choose what information you want to sync online with your device. If you select Store Windows Live contacts in your mobile phone’s contact list, your Windows Live™ contacts will be added to the contact list and to Windows Live™ Messenger on your device. If you select Sync e-mail, your Windows Live™ Mail or Hotmail inbox messages will be downloaded to your device.
Internet 167 The Windows Live™ interface On the Windows Live™ main screen, you will see a search bar, navigation buttons, and an area where you can show and customize your profile. 1 1 Search bar 2 Navigation Control buttons. Tap the left or right arrow to switch between Windows Live™ Messenger, Windows Live™ Mail, and Sync status. 3 Tap to change the display name, picture, or personal message. 4 Tap Menu to access and change settings.
Internet • • • • • • • • Note Instant messaging via text and voice Multiple conversations Insert emoticons Contact list with presence Send and receive files including photos Change status/display name View contacts by online status, groups, and more Send messages even when a contact is offline Before you can use Windows Live™ Messenger, your device must be connected to the Internet. For information about setting up an Internet connection, see “Ways of Connecting to the Internet” in this chapter.
Internet 169 To start and end conversations 1. In the contact list, select a contact, then tap Send IM to open a message screen. 2. Enter your text message in the text entry area of the message screen. 3. To add an emoticon, tap Menu > Add emoticon then tap an icon from the list. 4. Tap Send. 5. To end a conversation with the current contact, tap Menu > End conversation. Tips • To send a file, tap Menu > Send. You can choose to send a picture, voice clip or any file.
Internet Tip You can fill in other information about the contact, if desired. This is not necessary if you will communicate with the contact only through Windows Live™ Messenger or Live Mail. 4. Tap OK. 5. Follow the remaining instructions to add the new contact to your Windows Live™ contact list. 8.7 Using Your Device as a Modem (Internet Sharing) Internet Sharing connects your desktop or notebook computer to the Internet by using your device’s data connection (GPRS or EDGE, for instance).
Internet 171 To set up your device as a USB modem 1. On your device, tap Start > Programs > Internet Sharing. 2. In the PC Connection list, select USB. 3. In the Network Connection list, select the name of the connection that your device uses to connect to the Internet. 4. Connect your device to the computer using the USB cable. 5. Tap Connect.
Internet For Windows Vista: a. Click Start > Control Panel > Network and Internet > Network and Sharing Center. b. Click Manage network connections and then under Personal Area Network, double-click Bluetooth Network Connection. c. In the Bluetooth Personal Area Network Devices dialog box, select your device, then click Connect. For Windows XP: a. Tap Start > Control Panel > Network Connections. b. Under Personal Area Network, click the Bluetooth Network Connection icon. c.
Internet 173 8.8 Using RSS Hub RSS Hub is an RSS reader that keeps you up-to-date with the latest news from the Internet. It monitors Internet news channels and downloads the most current news updates and podcasts so you are instantly informed of breaking news and events. For more information and tips on using RSS Hub, see Help on your device. Note Make sure you have an active Internet connection (such as EDGE or GPRS) before using RSS Hub.
Internet Note If the RSS channel you want to subscribe to is not in the list of known channels, tap Back, then select another option on the New Channel Wizard screen. For more information on these other options, see the Help on your device. 3. Select the checkboxes of the RSS channels you want to subscribe to, then tap Finish. Tip Channels are grouped by categories. If you want to select all channels in a category, select the category check box. 4. The channel list appears.
Internet 175 To filter the channels in the display In the channel list, tap Menu > View, then select: • Updated to display only those channels with unread headlines. • All to display all subscribed channels. Manage channel categories To view all the channels in a particular category, tap All Categories in the upper left area of the channel list, then tap the category you want to display. To add a new category, tap Menu > Categories in the channel list to display all categories, then tap Menu > New.
Internet New or unread headlines display in bold and are marked with a blue newspaper icon. Headlines that have been read are marked with a gray newspaper icon. View the news summary Tap a headline in the headline list to display the news summary. Channel name Headline and read status Audio/Video/Image file attachment. Tap to download the file. News summary Tap to open the news item in Opera Mobile. See “Using Opera Mobile” in this chapter for details.
Internet 177 To download, play, or save podcasts 1. When you see an audio or video file attachment in the news summary, do one of the following to download the file: • Tap Menu > Podcasts > Start Download. • Tap the Download audio/Download video link below the audio/video file icon. Tip To cancel the file download, tap Menu > Podcasts > Cancel Download, or tap Cancel download below the audio/video file icon. 2.
Internet To view the next or previous news summary In the news summary screen, tap Menu > Next or Menu > Previous, or press NAVIGATION Left or Right. For more information about the features and configuring RSS Hub, refer to the online help. To open the online help, tap Start > Help while in RSS Hub.
Chapter 9 Bluetooth 9.1 Bluetooth Modes 9.2 Bluetooth Partnerships 9.3 Connecting a Bluetooth Hands-free or Stereo Headset 9.4 Beaming Information Using Bluetooth 9.5 Bluetooth Explorer and Bluetooth File Sharing 9.
Bluetooth 9.1 Bluetooth Modes Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about eight meters without requiring a physical connection. Bluetooth on your device operates in three different modes: • On. Bluetooth is turned on. Your device can detect other Bluetooth-enabled devices, but not vice versa. • Visible. Bluetooth is turned on, and all other Bluetooth-enabled devices can detect your device. • Off.
Bluetooth 181 9.2 Bluetooth Partnerships A Bluetooth partnership is a relationship that you create between your device and another Bluetooth-enabled device in order to exchange information in a secure manner. To create a Bluetooth partnership 1. On the Home screen, slide to the Settings tab and then tap Menu > Bluetooth Devices > Devices tab. 2. Tap Add new device. Your device displays the names of other Bluetooth devices within range. 3. Tap the device name in the box, then tap Next. 4.
Bluetooth To accept a Bluetooth partnership 1. Ensure that Bluetooth is turned on and in visible mode. 2. Tap Yes when prompted to establish a partnership with the other device. 3. Enter a passcode (the same passcode that is entered on the device requesting the partnership) to establish a secure connection. The passcode must be between 1 and 16 characters. 4. Tap Next. 5. Tap Done. You can now exchange information with the paired device.
Bluetooth 183 3. Tap the name of the Bluetooth headset, then tap Next. The device will automatically pair the device with the Bluetooth headset. Windows Mobile will automatically try one of the preconfigured passcodes (0000, 1111, 8888, 1234) to pair the Bluetooth headset with the device. If this fails, you have to enter the passcode delivered with your headset manually. Note If the Bluetooth stereo headset becomes disconnected, turn the headset on and repeat step 1 to 2 above.
Bluetooth a. On your computer, open Bluetooth Devices from the Control Panel, then click the Options tab on the Bluetooth Devices window. b. For Windows Vista, select Allow Bluetooth devices to find this computer. For Windows XP, select Turn discovery on and Allow Bluetooth devices to connect to this computer. c. Create a Bluetooth partnership between your device and computer. For information about creating a partnership, see “Bluetooth partnerships”. d.
Bluetooth 185 9.5 Bluetooth Explorer and Bluetooth File Sharing Bluetooth Explorer searches for other Bluetooth devices that have file sharing enabled and lets you access their Bluetooth shared folder. You can copy files from and to their shared folder, and create subfolders in it. When you enable Bluetooth file sharing on your device, other Bluetooth-enabled devices will also be able to access your Bluetooth shared folder. To enable Bluetooth Explorer and Bluetooth file sharing on your device 1.
Bluetooth 2. Bluetooth Explorer then scans for other Bluetooth devices that have file sharing enabled. From the list, tap to select a Bluetooth device you want to connect to. You may need to enter a passcode in order for you to connect to the selected device. If there are files contained in the Bluetooth shared folder on the other device, you will be able to see them on the Bluetooth Explorer screen. 3. Select one or more files, then tap Menu > Edit and choose to cut or copy the files. 4. Tap Up twice.
Bluetooth 187 To print contact information 1. On the Home screen, slide to the People tab and then tap All People. 2. Select the contact whose information you want to print. 3. Tap Menu > Print via Bluetooth > Menu > Search Devices. Your device starts to search for Bluetooth devices. 4. Select the Bluetooth printer and tap Menu > Send File. 5. Set the printing options you want, then tap Print. To print a calendar appointment 1.
Bluetooth
Chapter 10 Navigating on the Road 10.1 Guidelines and Preparation for Using GPS 10.
Navigating on the Road 10.1 Guidelines and Preparation for Using GPS If you install a GPS software on your device, please follow these guidelines before and when using your device as a GPS device. • Do not operate the GPS system while driving. The plotted GPS route is only for driving reference. It should not interfere with actual driving behavior.
Navigating on the Road 191 • The GPS signal cannot pass through solid non-transparent objects. Signal reception may be affected by obstructions such as high-rise buildings, tunnels, bridges, forests, weather (rainy or cloudy days), etc. If the vehicle’s visor contains metal, it will be difficult for the GPS signal to pass through. • Wireless communication products (such as mobile phones or radar-detecting devices) may interfere with the satellite signal, resulting in unstable signal reception.
Navigating on the Road To download data Tap Download on the QuickGPS screen. On the screen, initially, you will see the Valid time of the downloaded data. As time passes, the remaining days and hours of validity will be shown. To speed up GPS positioning, download the latest ephemeris data when the validity of the data expires. Download options To configure download times, tap Menu > Options and choose from the available options: • Remind me when data expires.
Chapter 11 Experiencing Multimedia 11.1 Taking Photos and Videos 11.2 Viewing Photos and Videos Using Album 11.3 Using Windows Media® Player Mobile 11.4 Using FM Radio 11.5 Using Audio Booster 11.
Experiencing Multimedia 11.1 Taking Photos and Videos Use Camera to take photos and record video clips. You can either use the main (back) camera or second (front) camera to take photos or shoot videos. To open the Camera screen On the Home screen, slide to the Photos and Videos tab and then tap the camera icon ( ). The screen orientation automatically switches to landscape mode when you open Camera. Tip You can also tap Start > Programs > Camera to open the Camera program.
Experiencing Multimedia 195 You can select from the following capture modes: Icon Capture Mode Photo Captures standard still images. Video Captures video clips, with or without accompanying audio. Panorama Captures a sequence of still images continuously in one direction, and allows stitching of all the images to create a panoramic view of a scenery. MMS Video Captures video clips suitable for sending with MMS messages.
Experiencing Multimedia Camera controls The camera comes with an auto-focus function to let you capture sharp and crisp photos and videos of your subjects. Depending on the Shoot Option you have chosen, you will need to either touch or press the ENTER button to activate autofocus. When auto-focus is activated, it is indicated by a flashing white bracket ( ). When focus is set, the bracket changes to a steady green bracket ( ).
Experiencing Multimedia 197 1 Zoom control. Tap Tip to zoom in, or to zoom out. You can also press NAVIGATION Up/Down (Landscape orientation) or slide your finger clockwise or counterclockwise on the center Navigation Control to zoom in or out. 2 Album. Tap to open Album. See “Viewing Photos and Videos Using Album” for details. 3 Capture mode. Displays the current capture mode. Tap to open an on-screen menu where you can choose the capture mode. 4 Menu. Tap to open the Camera Settings screen.
Experiencing Multimedia Menu Panel The Menu Panel provides a quick way of adjusting most common camera settings and lets you access more advanced camera settings. On the Camera screen, tap to open the Menu Panel. To adjust a setting, keep tapping a button on the panel, for instance, White Balance, to cycle through the available settings. To access advanced options, tap . Note The available settings on the panel depend on the selected Capture mode. 6 1 5 2 4 3 1 Flash Light.
Experiencing Multimedia 199 5 Brightness. Tap to open the Brightness bar at the bottom of the screen. On the Brightness bar, tap to decrease, or to increase the brightness level. Tap outside the Brightness bar to apply the change. 6 White Balance. White balance enables the camera to capture colors more accurately by adjusting to different lighting conditions. White balance settings include: Auto ( ), Daylight ( ), Night ( ), Incandescent ( ), and Fluorescent ( ).
Experiencing Multimedia The camera zoom range for a photo or a video clip depends on the capture mode and resolution. Refer to the table for more information. Capture mode Photo Video Panorama MMS Video Contacts Picture Picture Theme Note Resolution Zoom range 3M (2048 x 1536) 1.0x to 2.0x 2M (1600 x 1200) 1.0x to 2.0x 1M (1280 x 960) 1.0x to 2.0x Large (640 x 480) 1.0x to 2.0x Medium (320 x 240) 1.0x to 4.0x CIF (352 x 288) 1x and 1.5x Large (320 x 240) 1x and 1.
Experiencing Multimedia 201 The Review screen After capturing, the Review screen lets you view, send, or delete the photo or video clip by tapping an icon at the bottom of the screen. Review screen icons Icon Function Back Return to the live Camera screen. Delete Delete the captured image or video. View View the captured image or video in the Album program. Send Send the captured image or video via e-mail or MMS.
Experiencing Multimedia Advanced Options The Advanced Options let you adjust options for your selected capture mode and set Camera program preferences. Access the Advanced Options by tapping Advanced on the Menu Panel. You can either tap on-screen or press NAVIGATION Up/Down (Landscape orientation) to navigate through the Advanced Options screen. Tap an item to change the setting. Tap to go through the different Advanced Camera Settings screens. Tap to go back to the Camera screen.
Experiencing Multimedia 203 • Keep Backlight. Turn the backlight on or off. This overrides your device backlight settings while you are using the camera. • Shutter Sound. Choose whether or not you want the camera to make a shutter sound when you press the ENTER button. • Shoot Option. The camera comes with an auto-focus feature that is activated when the ENTER button is either touched or pressed. • • Touch and Press (Default).
Experiencing Multimedia Choose either Center Area to measure light using the center area of the subject, or Average to measure light using the area around the subject. • Prefix. When Default is selected as the prefix, the file name of each new captured file is set to “IMAGE” or “VIDEO” followed by a sequential number, for example: IMAGE_001.jpg. You may also choose to name files using either the current Date or Date & Time as the prefix.
Experiencing Multimedia 205 • • Template Folder (Picture Theme mode). By default, templates are stored in the \My Documents\Templates folder on the device’s Main Memory. If you transferred some templates to a storage card (via File Explorer), set this option to Main + Card to specify that templates are located in both the main memory and the storage card. Show Reminder (Contacts Picture mode).
Experiencing Multimedia Select a photo or video to view 1. On the main Album screen, tap Albums and then select the album to view. The contents of the album are then displayed on the main Album screen. 2. Browse through the files by sliding your finger upward or downward. 3. Do one of the following: • Tap an image to view it in full screen mode. See “View an image” for details. • Tap a video file (files with the icon) to play back the video file. See “Play back video” in this chapter for details.
Experiencing Multimedia 207 To rotate the image While viewing images, you can automatically rotate the image by simply turning your device sideways. To view the next or previous image When viewing images in Portrait or Landscape mode, go to the next image by swiping your finger across the screen from right to left. Go back to the previous image by swiping your finger from left to right.
Experiencing Multimedia To zoom in or out of an image While viewing an image, make a full circle motion on the screen with your finger. Slide your finger clockwise on an area to zoom in on that area. Tips Slide your finger counterclockwise to zoom out. • When you zoom in on an image, double tap the screen to automatically zoom out and fit the image to the screen. • When you zoom in on an image, tap and hold the screen so you can pan the image.
Experiencing Multimedia 209 To view still images as a slideshow While viewing the slideshow, tap the screen to show playback controls. Note The screen orientation automatically switches to landscape mode when viewing a slideshow. Tap to open the slideshow options where you can set the transition effect to use, time per slide, and orientation of the images. Tap to return to the main Album screen or the Photos and Videos tab. Tap to go back to the previous image.
Experiencing Multimedia Play back video While playing back video, tap the screen to show the playback controls. Drag to go forward or backward in the video. Elapsed time Total duration Tap to go back to the beginning of the video. Tap to stop video playback. Tap to play or pause video playback. Tip If the video is in your favorite album, you can start the video playback from the Photos and Videos tab on the Home screen. On the Photos and Video tab, tap Play.
Experiencing Multimedia 211 11.3 Using Windows Media® Player Mobile Windows Media® Player Mobile plays digital audio and video files that are stored on your device or on a network, such as on a web site. Video File Formats Supported File Extensions Windows Media Video MPEG4 Simple Profile H.263 H.264 Motion JPEG .wmv, .asf .mp4 .3gp, .3g2 .mp4, .3gp, .3g2, .m4v .
Experiencing Multimedia About the controls Tap and drag to jump to any part of the video or audio Mute/Unmute Full screen Increase volume Visit WindowsMedia.com Decrease volume Skip to the beginning of Skip to the next file the current file or to the Play/Pause previous file About the screens and menus Windows Media® Player Mobile has three primary screens: • Playback screen. The screen that displays the playback controls (such as Play, Pause, Next, Previous, and Volume) and the video window.
Experiencing Multimedia 213 At the bottom of each screen, you can open a Menu. The commands on this menu vary, depending on which screen you are viewing. For more information about the commands in these menus, see Help on your device. Synchronize video and audio files Use the latest version of Windows Media® Player on your computer to synchronize digital media files from your computer to your device. This ensures that protected files and album art (for skins) are copied to your device correctly.
Experiencing Multimedia The files will begin synchronizing to your device. The next time you connect your device to your computer while Windows Media® Player is running, synchronization will start automatically. To synchronize content manually to your device 1. If you have not set up media synchronization between your device and computer, follow steps 1 to 3 in “To synchronize content to your device automatically”. 2. Click the Sync tab on the Windows Media® Player of your computer.
Experiencing Multimedia 215 Notes • Use Windows Media® Player 11 or higher on your computer to synchronize media files to your device. • Audio files copy faster if Windows Media® Player is configured to automatically set the quality level for audio files copied to your device. For more information, see the Windows Media® Player Help. Play media Use the Library to find and play songs, videos, and playlists that are stored on your device or an installed storage card. To update the Library 1.
Experiencing Multimedia Playlists In Windows Media® Player Mobile, you can create a new playlist by saving the current Now Playing playlist and giving it a new name. To save a new playlist 1. If you are not on the Library screen, tap Menu > Library. 2. Tap to select a category (for example, My Music or My Playlists). 3. Select a media file that you want, then tap Menu > Queue Up. This adds the file to the Now Playing list.
Experiencing Multimedia 217 11.4 Using FM Radio FM Radio allows you to listen to FM radio stations on your device. Since FM Radio uses the provided stereo wired headset as an antenna, you must plug in the headset first onto the earphone jack of your device before you open the program. To open FM Radio Tap Start > Programs > FM Radio. The first time this program is used, it will automatically scan for available FM channels in your area, save them as presets, then play the first FM station found.
Experiencing Multimedia This control Does this 1 Turns off FM radio. 2 See “Radio display” for details. 3 Searches the FM band for the next higher FM channel. 4 Increases the radio frequency by 0.1MHz. 5 Turns the sound on or off. 6 Allows you to save up to six favorite FM stations as presets. Tap a button to tune in to a favorite station. 7 Switches between headset and speaker output. 8 Stereo/Mono Allows you to switch between Mono and Stereo modes.
Experiencing Multimedia 219 Radio display 1 Shows the status of FM Radio. 1 2 2 Shows the preset number when you select a preset FM station. 3 Shows the received signal strength. 4 Shows the radio frequency. 3 4 Device controls used in FM Radio Navigation • Press NAVIGATION Left/Right to search the FM band for the next lower/higher FM channel. When the search reaches the last station, it cycles back to the beginning of the FM band.
Experiencing Multimedia To save FM stations 1. Tune to the desired FM frequency, then tap Presets. 2. On the Presets screen, tap that appears on the desired preset number where you want to save the FM station. You can save up to 20 preset radio stations. Radio stations that are saved on Presets 1 to 6 can be accessed on the main FM Radio screen. Tip Tap to remove a favorite FM station from the list. 3. When done, tap OK.
Experiencing Multimedia 221 • Sleep Set how much time must pass before FM Radio goes into sleep mode. The Sleep option is switched to Off every time you launch FM Radio. • Exit Select to turn off FM Radio. 11.5 Using Audio Booster Audio Booster optimizes sound for a better listening experience. It provides preset moods, such as hip hop, jazz, rock, etc., and several enhancement presets that suit different types of music. To access Audio Booster Tap Start > Programs > Audio Booster.
Experiencing Multimedia To create a custom equalizer preset 1. Adjust the frequency bands to your desired values by dragging the equalizer controls. The selected values are indicated on top of the sliders. 2. Save your equalizer settings as a preset by tapping Menu > Save as Preset. 3. Enter a preset name and then tap Done. The preset you created will be added to the list box. To delete a custom equalizer preset 1. Tap the list box then select the Equalizer preset you want to delete. 2.
Experiencing Multimedia 223 To trim the MP3 file 1. Tap Start > Programs > MP3 Trimmer. 2. Tap Open to find the MP3 file in the device or storage card. 3. On the MP3 Trimmer screen, use the stylus to adjust the Start Point and End Point. After you set the Start Point, the song will play back starting from the start point. After you set the End Point, the song will play back starting from 5 seconds before the end point. 4. Tap Play to play back the trimmed song. 5.
Experiencing Multimedia
Chapter 12 Programs 12.1 Programs on your Device 12.2 Adding and Removing Programs 12.3 Adobe® Reader® LE 12.4 Calendar 12.5 Contacts 12.6 Comm Manager 12.7 JETCET™ PRINT 12.8 Microsoft® Office Mobile 12.9 Notes 12.10 JBlend 12.11 SIM Manager 12.12 Spb GPRS Monitor 12.13 Sprite Backup 12.14 Tasks 12.15 Voice Commander 12.16 Voice Recorder 12.17 WorldCard Mobile 12.
Programs 12.1 Programs on your Device The following are programs you can find on your device or install from the Application disc. Programs in the Start Menu Icon Description Office Mobile Use the complete suite of Microsoft® Office applications for your mobile device. Excel Mobile Create new workbooks or view and edit Excel workbooks. OneNote Mobile Create notes with text, photos, and voice recordings. PowerPoint Mobile View PowerPoint slides and presentations.
Programs 227 Programs screen Icon Description Games Play these pre-installed games: Bubble Breaker, Teeter and Solitaire. ActiveSync Synchronize information between your device and a PC or the Exchange Server. See Chapter 5 and 7 for details. Adobe Reader LE View PDF (Portable Document Format) files on your device. Album View photos and videos that you captured using the device camera. See Chapter 11 for details.
Programs Icon Description Internet Sharing Connect your notebook computer to the Internet using your device's data connection. See Chapter 8 for details. JBlend Download and install Java applications, such as games and tools, on your device. JETCET PRINT Print documents, image files, e-mails, web pages and more from your device. Messenger This is the mobile version of Windows Live™ Messenger. See Chapter 8 for details.
Programs 229 Icon Description Spb GPRS Monitor Use this program to measure the amount of data transfers that you have made via the GPRS or GSM network connection, and calculate network usage costs. You can install this program from the Application disc. Sprite Backup Back up your device’s data and files to a specified folder, a storage card, or a computer. You can install this program from the Application disc. Streaming Media Stream live or on-demand video. See Chapter 8 for details.
Programs 12.2 Adding and Removing Programs Additional programs, such as the programs in the Application disc or other programs that you purchase, can be installed and uninstalled on your device. Your device does not allow you to uninstall most of the preinstalled programs. Note Before you purchase additional programs for your device, make sure that they are compatible with your device. To install a program 1.
Programs 231 12.3 Adobe® Reader® LE Adobe® Reader® LE is an application for viewing PDF (Portable Document Format) documents on your device. It supports a subset of the features found in the PC versions of Adobe Reader. To open Adobe Reader LE Tap Start > Programs > Adobe Reader LE. To open a PDF file on your device • Open a PDF file in Adobe Reader LE; or • Open File Explorer, find the PDF file, then tap the file to open it.
Programs To search for text in the document 1. Tap Tools > Find > Text or tap in the toolbar. 2. Type in the text to be searched, then tap Find. The matched text in the document will be highlighted. 3. To view the next occurrence of the text, tap Tools > Find > Next. Tips • Adobe Reader LE displays a bookmark pane for the PDF files that contain bookmarks. Tap the bookmarks to go to a specific section/page within the file.
Programs 233 • If there is a time frame for the appointment, set the start and end dates and times. 4. Specify the type of category for your appointment, so that it can be grouped with other related appointments. Tap Categories, then select a preset category (Business, Holiday, Personal, or Seasonal), or tap New to create your own category. 5. When finished, tap OK to return to the calendar.
Programs View appointments By default, Calendar displays appointments in Agenda view. You can also look at your appointments in Day, Week, Month, and Year views. The highlighted hours here indicate the time of your appointments. The red arrows indicate that there are conflicting appointments. Tap to view appointment details. Tap to switch views. Agenda view • To see detailed appointment information in any view, tap the appointment.
Programs 235 Send appointments To send a meeting request Use Calendar to schedule meetings via e-mail with contacts who use Outlook or Outlook Mobile. 1. Open the Calendar screen. 2. Schedule a new appointment, or open an existing one and tap Menu > Edit. 3. Tap Attendees, then tap Add Required Attendee or Add Optional Attendee and add the contacts whom you want to invite. Note You can specify if an attendee is required or optional only if your device is connected to a Microsoft Exchange 2007 server.
Programs 12.5 Contacts Contacts is your address book and information storage for people and businesses you communicate with. You can add the following types of contacts to your device: • Outlook contacts. Contacts that are stored on your device, which can be created on your device or synchronized with your PC or the Exchange Server. • SIM contacts. Contacts that are stored on the SIM card. Only a name and phone number can be stored for each entry. • Windows Live™ contacts.
Programs 237 3. In the File as field, choose how you want the contact name to appear in the contact list. 4. To add a photo of the contact, tap Select a picture, and then select the picture file or tap Camera to take a photo of the contact. 5. To assign a ring tone to the contact, tap the Ring tone field, scroll through the list of tones, then select a desired tone. 6. When finished, tap OK.
Programs Organize and search contacts To group similar contacts For easier management, you can group similar contacts by assigning them to categories. 1. Create a new Outlook contact or edit an existing Outlook contact. 2. Tap Categories. 3. Select a preset category such as Business or Personal, or tap New to create your own category. 4. When finished, tap OK.
Programs 239 Share contact information To beam a contact’s details You can quickly send contact information to another mobile phone or device through Bluetooth beaming. 1. On the Contacts screen, select a contact. 2. Tap Menu > Send Contact > Beam, then select a device where to beam the contact to. Note Before beaming, make sure Bluetooth is turned on and set to visible mode on your device and the target mobile device. You can also beam contact information to your computer. See Chapter 9 for details.
Programs 12.6 Comm Manager Comm Manager is a central location where you can easily turn on and off the communication features of your device such as the phone, Wi-Fi, data connection, Bluetooth, and more. To access the Comm Manager Do one of the following: • On the TouchFLO 3D Home screen, slide to the Settings tab and then touch Communications. • Touch Start > Programs > Comm Manager. • Touch Start > Settings > Connections tab > Comm Manager. 1 2 3 4 5 6 1 Switch Airplane Mode on or off.
Programs 241 4 Switch Wi-Fi on or off. Tap Settings > Wireless LAN to configure wireless network connection settings. See Chapter 8 for details. 5 Switch between automatically receiving (as items arrive) or manually retrieving Outlook e-mails. See Chapter 7 for details. 6 Disconnect active data connections (GPRS, for example). You cannot reconnect a data connection in Comm Manager. 12.
Programs Set up a printer You must configure your device to connect to a printer before you can start printing. 1. Tap Start > Programs > JETCET PRINT. 2. If you are not in the Settings tab, tap the settings button ( • Tap Add Network Printer to set up and connect to a shared network printer. Note • Note ), then: The device will wait continuously if you have entered an incorrect IP address while setting up a network printer.
Programs 243 Print a web page 1. Open your web browser and go to the web page that you want to print. 2. Tap and hold the screen, then tap Print on the menu. 3. Select a printer in the Choose a Printer list box, select the paper size, then tap Next to print the web page. 12.8 Microsoft® Office Mobile Microsoft® Office Mobile consists of the following applications: • Microsoft® Office Excel® Mobile lets you create and edit Excel workbooks and templates on your device.
Programs When working with Word Mobile and Excel Mobile files, you can use the Navigation Control on your device for zooming: To zoom in, slide your finger clockwise around the Navigation Control. To zoom out, slide your finger counterclockwise around the Navigation Control. Word Mobile and Excel Mobile do not fully support some features of Microsoft® Office Word and Microsoft® Office Excel®.
Programs 245 12.9 Notes Using Notes, you can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability, and more. To create a note 1. Tap Start > Programs > Notes. In the note list, tap New. 2. Choose an input method and then enter your text. Tip For more information about input methods and entering text, see Chapter 4. 3. When finished, tap OK to save and return to the note list. Notes • To select handwritten text, tap and hold next to the writing.
Programs To record a voice note You can create a stand-alone recording (voice note) or you can add a recording to a note. 1. Tap Start > Programs > Notes. 2. If you do not see the Recording toolbar, tap Menu > View Recording Toolbar. 3. Do one of the following: • To add a recording to a note, create or open a note. • To create a stand-alone recording, record from the note list. 4. Tap the Record icon ( ) to begin recording your voice. Tap the Stop icon ( ) when you are finished recording.
Programs 247 To download and install via Internet Explorer Mobile 1. On the JBlend screen, tap Install > Download to open Internet Explorer Mobile. 2. Locate the MIDlet or MIDlet suite while connected to the Internet. 3. Select the MIDlet or MIDlet suite to download. 4. Information about the MIDlet or MIDlet suite is then displayed. Tap Continue. 5. Confirm to start downloading and the installation.
Programs To update a MIDlet or MIDlet suite On the JBlend screen, select a MIDlet or MIDlet suite and then tap Menu > Application > Update Info. JBlend will search for updates for the selected MIDlet or MIDlet suite where it was installed from before. To remove a MIDlet or MIDlet suite Before you uninstall a MIDlet, make sure that it is not running. 1. On the JBlend screen, tap and hold the MIDlet and then tap Delete. Alternatively, you can tap Menu > Application > Delete. 2. Tap Yes to confirm.
Programs 249 12.11 SIM Manager SIM Manager allows you to view the contents of your SIM card, transfer contacts from your SIM card to your device or vice versa, and make a call to a SIM contact. To create a contact on your SIM card 1. Tap Start > Programs > SIM Manager. 2. Tap New and enter a contact name and phone number. 3. Tap Save to save the information on your SIM card. Tip To change contact information on your SIM card, tap a SIM contact, edit the information, and then tap Save.
Programs 2. Select the check boxes of the types of phone numbers that you want to be added to the SIM card. 3. Under the Mark column, you can change the indicator that will be appended to the SIM contact names for each phone number type. To do so, select a phone type, tap Edit, enter your desired indicator, then tap Save. 4. After modifying, tap OK. 5. Tap Menu > Contacts to SIM. 6. Select the check boxes of the contact’s phone numbers that you want to copy to your SIM card, then tap Save.
Programs 251 12.12 Spb GPRS Monitor Using Spb GPRS Monitor, you can monitor how much data you have sent and received on your device, and check the network usage costs by taking into account your service plan details. You can also view connection cost and traffic charts, generate reports of network connection usage, and export reports to CSV files for use with Microsoft® Office Excel® and Access. Install GPRS Monitor The GPRS Monitor program is included in the Application disc.
Programs When you tap the GPRS Monitor icon on the title bar, a pop-up window opens and shows you detailed statistics about your data transfers, such as the data size you have just transferred and its cost, the allowable amount of data that you can transfer, and more. Set up monitoring and notification To select the connection to be monitored 1. On the GPRS Monitor screen, tap Tools > Options > Connection tab. 2. Select the Enable connection monitoring check box. 3.
Programs 253 To set up traffic limit notifications You can set up traffic limit notifications if you want to be notified when a traffic limit is reached. 1. On the GPRS Monitor screen, tap Tools > Options. 2. Enable the notifications on the Day Warn and Month Warn tabs. You can specify up to three daily and three monthly limits. Once traffic reaches one of these limits, you will receive a notification.
Programs 12.13 Sprite Backup Use Sprite Backup to back up data, which includes settings, files, contacts, and all other information, to the device memory, storage card or a computer. Note If you are sending your device for repair or performing a hard reset, data from your device will be lost. It is recommended that you use Sprite Backup to back up your files including settings, contacts and other information to your computer or a storage card. To install Sprite Backup 1.
Programs 255 Use the check boxes to select or exclude items for backup. Main screen Notes Backup Data Selection screen • To prevent data restore problems, it is recommended that you exclude the device’s File System from back up. To exclude File System from back up, tap “+” before the System Data item to expand the list, then clear the File System checkbox.
Programs To restore data 1. On the Sprite Backup main screen, tap Restore. Sprite Backup then searches for all available backup files on the device memory and storage card and then displays them on the Open File screen. Tip To search for backup files created on your computer, connect your device to your computer and run Sprite Backup PC Manager on your computer. In Sprite Backup’s Open File screen on your device, set Location to PC. 2. Select the backup file you want to restore and then tap Next. 3.
Programs 257 12.14 Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). Your tasks are displayed in a task list. Overdue tasks are displayed in red. A reminder will be displayed when you have new tasks to be completed. To create a task 1. Tap Start > Programs > Tasks. 2. Tap Menu > New Task, enter a subject for the task, and fill in information such as start and due dates, priority, and so on. 3.
Programs To send task information as a vCalendar After selecting the task to send in the Task screen, tap Menu > Send as vCalendar to send a vCalendar containing task details as a file attachment in an MMS message. For more information, see “MMS” in Chapter 6. 12.15 Voice Commander Voice Commander enables you to call contacts, open programs, or control multimedia playback using voice commands. It also lets you create customized voice tags for faster and more accurate voice recognition.
Programs 259 Notes • Do not pause when you say a command. For example, no pause is required between “Call” and “John”. • If the program cannot recognize your voice command, move to a quiet place, then try again while speaking clearly. For better voice command recognition, say the command with the same voice that you would use in a call. • Say the command completely before the progress bar reaches the end.
Programs Create a voice tag for a program You can create customized voice tags to open programs with commands that are not included in the preset voice command list. For example, you can create a voice tag “audio” to open the Audio Manager program. 1. Tap Start > Settings > Personal tab > Voice Commander Settings. Tip You can also tap Menu > Settings in the Voice Commander screen to open the Voice Commander settings. 2.
Programs 261 Note If a storage card is installed before you open Voice Recorder, the recordings are saved in the My Voices folder on the storage card by default. 1. Tap the arrow beside the folder name on the top-left of the screen. 2. In the menu that opens, choose an existing folder or touch Add/Delete to create a new folder. To play back a voice recording On the Voice Recorder screen, touch a voice recording, or navigate to a voice recording and then tap Play ( ).
Programs To set a voice recording as ring tone Select the voice recording, then tap Menu > Set as Ringtone. To rename or move a recording 1. Select the voice recording, then tap Menu > Rename/Move. Tip To select multiple recordings, tap and drag over the desired recordings or tap Menu > Select All. Note that you can move multiple files, but you cannot rename multiple files simultaneously. 2. In Name, enter the new voice recording name. 3.
Programs 263 Tap to view the WorldCard Mobile copyright information. Tap to open the WorldCard Mobile help. Tap to open the Camera program and take a photo of a business card. Tap to exit WorldCard Mobile. Capture and export business card information Capture a business card and export the card information as a new contact in your Contacts list. To capture a business card and export its information to Contacts 1. Tap on the WorldCard Mobile screen. 2. Press ENTER to take a photo of the business card.
Programs Clear this box if you do not want to include the particular information for the contact when exported to the Contacts list. Tap the down arrow to change the field name. Tap to open the on-screen keyboard and edit the contact details. 5. Tap Export, then go to your Contacts list to view the exported contact. For more information about using WorldCard Mobile, see Help on your device.
Programs 265 12.18 ZIP The ZIP program increases the storage capacity of your device by allowing you to compress files in the conventional ZIP format. It also allows you to extract files from a zip file. To start ZIP on your device Tap Start > Programs > ZIP. Each time you start ZIP, it searches for files that have the .zip file extension, and displays these files on the Archive List screen. To open a ZIP file and extract files 1.
Programs To create a new zip archive 1. Touch File > New Archive. 2. On the Save As screen, enter the zip file name and choose a folder where you want to save it. You can also choose whether to save the zip file on the device’s main memory or a storage card. 3. Touch Save. 4. Touch Menu > Action > Add. 5. Navigate to the folder that contains the files you want to archive. 6. Select files to add by doing one of the following: • Touch a file to select it.
Chapter 13 Managing Your Device 13.1 Copying and Managing Files 13.2 Settings on your Device 13.3 Changing Basic Settings 13.4 Using Connection Setup 13.5 Using Task Manager 13.6 Connecting to an External Display 13.7 Protecting Your Device 13.8 Managing Memory 13.9 Resetting Your Device 13.10 Windows Update 13.
Managing Your Device 13.1 Copying and Managing Files You can copy files between your device and computer, or copy files to a storage card installed on your device. You can also efficiently manage your files and folders using File Explorer. To copy files using Windows Mobile Device Center or ActiveSync 1. Connect your device to the computer. 2. Click File Management > Browse the contents of your device in Windows Mobile Device Center on your computer, or click Explore in ActiveSync on your computer.
Managing Your Device 269 4. To quickly delete, rename, or copy a file, tap and hold the file, then choose the desired operation on the shortcut menu. To copy or delete multiple files, tap and drag over the desired files to select, tap and hold the selection, then choose the desired operation on the shortcut menu. To copy files to a storage card 1. Make sure that the storage card is properly installed on your device. 2. Tap Start > Programs > File Explorer and navigate to the appropriate folder. 3.
Managing Your Device Icon Description Lock Set a password for your device. Menus Set which programs will appear in the Start menu. Owner Information Enter your personal information on your device. Phone Customize phone settings such as ring tone, set a PIN number for your SIM card, and more. Sounds & Notifications Enable sounds for events, notifications, and more, and set the type of notification for different events.
Managing Your Device 271 Icon Description Clock & Alarms Set the device clock to the date and time of your locale or to a visiting time zone when you’re traveling. Alarms can also be set at specified days and times of a week. Customer Feedback Set your device to automatically send information about how you use Windows Mobile. By default, this option is disabled. Device Information See information about the firmware version, hardware, identity, and the duration of calls made on your device.
Managing Your Device Icon Description Power Check the remaining battery power. You can also set the brightness of the backlight and timeout for turning off the display (switching device to Sleep mode) to conserve battery power. Regional Settings Set the regional configuration to use, including the format for displaying numbers, currency, date, and time on your device. Remove Programs Remove programs that you installed on your device.
Managing Your Device 273 Connections tab Icon Description Advanced Network Turn on/off HSPA, set the GPRS authentication method, set the line type to use when making circuit switch data (CSD) connection, and set the SMS service preference. HSPA is a digital data service that provides high-speed downstream data rates.
Managing Your Device Icon Description Wireless LAN See information about the active wireless network, and customize Wi-Fi settings. 13.3 Changing Basic Settings Date and time To set the date and time 1. On the Home screen Home tab, tap the time display and then tap the Time tab. Tip Tap the More tab and select the Display the clock on the title bar in all programs option to show the clock on all screens. 2. Select the correct time zone and change the date or time.
Managing Your Device 275 Note This does not change the language of your device’s operating system. The region you select determines which options will be available on the other tabs. 3. To customize regional settings further, tap the appropriate tabs and set the desired options. Display settings To adjust the screen brightness 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Power > Backlight tab. 3.
Managing Your Device Device name The device name is used to identify your device in the following situations: • Synchronizing with a computer • Connecting to a network • Restoring information from a backup Note If you synchronize multiple devices with the same computer, each device must have a unique name. To change the device name 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap About > Device ID tab. 3. Enter the device name.
Managing Your Device 277 Tips • You can use *.wav, *.mid, *.mp3, *.wma, or other types of sound files that you downloaded from the Internet or copied from your computer as ring tones. To quickly set the music file as a ring tone, tap and hold the music file and then select Set As Ringtone. For a complete list of supported audio file formats for ring tones, see "Specifications" in the Appendix.
Managing Your Device 3. On the Notifications tab, in Event, tap an event name and choose how you want to be notified by selecting the appropriate check boxes. You can choose from several options, such as a special sound, a message, a flashing light, or vibrate. Tip Turning off sounds and flashing light notifications helps conserve battery power.
Managing Your Device 279 To automatically configure the device’s data connections The first time you power on your device, or when you insert a new SIM card and then power on your device, Connection Setup will display a notification message to inform you that it will automatically configure your device’s connection settings. 1. Tap Yes on the notification message. Note If your SIM card supports multiple network operator profiles, the next message that appears will display network profile choices.
Managing Your Device 13.5 Using Task Manager Task Manager lets you view and stop running programs, configure the and enable the Quick Menu on the Home screen. button, To open Task Manager • Tap the Quick Menu button on the top right corner of the Home screen to open the Quick Menu, then tap . • On the Home screen, slide to the Settings tab and then tap All Settings. On the System tab, tap Task Manager. To switch back to a running program • Tap the program name in the Quick Menu.
Managing Your Device 281 To close running programs from the Task Manager 1. On the Task Manager screen, tap the Running tab. 2. Do one of the following: Tip • Select the check box of the programs that you want to close, then tap Stop Selected. • Tap Stop All to close all programs in the list. • Tap Menu > Stop All but Selected to close all programs except those which check boxes are selected. You can also close running programs from the Quick Menu on the Home screen.
Managing Your Device 13.6 Connecting to an External Display The TV Out function outputs the device’s screen contents and audio to an external display with an RCA cable socket such as a television. Notes • You need an HTC TV Out cable to be able to connect your device to an external display. The HTC TV Out cable is sold separately. • When you plug in the HTC TV Out cable to your device, you will not be able to play music files from the TouchFLO 3D Music tab.
Managing Your Device 283 5. Tap the type of media you want to output. 6. Turn on the external display and then switch to the input signal that you connected the HTC TV Out cable to (for example, Video 1). 13.7 Protecting Your Device Protect your SIM card with a PIN You can protect your SIM card from unauthorized use by assigning a PIN (personal identification number). The default SIM card PIN is provided by your wireless service provider. To enable the SIM card PIN 1.
Managing Your Device Tip If your device is configured to connect to a network, use an alphanumeric password for increased security. 5. Enter the password in both the Password and Confirm boxes. 6. Tap OK. The next time the device is turned on, you will be prompted to enter your password. Notes • To ensure that you can always make emergency calls, do not begin your password with the digits of your local emergency number.
Managing Your Device 285 13.8 Managing Memory To see how much memory is available for use 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Memory > Main tab. The amount of memory allocated to data storage versus program storage is displayed, as well as the amount of memory in use versus the available memory. To see the available storage card space 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2.
Managing Your Device 13.9 Resetting Your Device Soft reset Occasionally, you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost. To perform a soft reset 1.
Managing Your Device 287 Important If Encrypt files when placed on a storage card is enabled, backup all files from the storage card before using Clear Storage, hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card. To perform a hard reset 1.
Managing Your Device 13.10 Windows Update You can update Windows Mobile® on your device with the latest updates, security patches or fixes, if these are available. To set up Windows Update The first time you run Windows Update, you need to set up how you want Windows Update to check for patches on the Microsoft web site. 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Windows Update. 3. On the Update Setup screen, tap Next. 4.
Managing Your Device 289 3. Tap Menu and select the option you want to change. • Tap Connections to change how the device connects to the Internet when checking for updates. • Tap Change Schedule to change how Windows Update checks for Windows Mobile® updates. 13.11 Battery Saving Tips How long your battery power lasts depends on the battery type and how you use your device. Try the following to help conserve battery life: • When the device is not in use, press POWER to switch off the display.
Managing Your Device • Turn Bluetooth off when you are not using it. Make your device visible to other devices only when you are trying to establish a Bluetooth partnership. For more information about Bluetooth, see Chapter 9. • Lower the volume. • Close battery-intensive programs, such as the Camera, when you are done using them. Make sure the programs are ended and are not continuously running in the background. Refer to “Using Task Manager” in this chapter for information on closing programs.
Appendix A.1 Specifications A.
Appendix A.1 Specifications System Information Processor Qualcomm® MSM7201A™ 528 MHz Memory • ROM : 512 MB • RAM : 288 MB DDR Note: Figures are the total ROM and RAM memory available for use and storage. Since the memory is shared by the operating system, applications, and data, the actual available memory is less than what is specified. Operating System Windows Mobile® 6.
Appendix 293 Physical Dimensions 102 mm (L) X 51 mm (W) X 18.05 mm (T) Weight 165 g (with battery) Display LCD Type 2.8-inch TFT-LCD flat touch-sensitive screen Resolution 480 x 640 VGA resolution Camera Module Type Main camera: 3.
Appendix Audio Microphone/ Speaker Built-in Ring tone • Supports MP3, AAC, AAC+, WMA, WAV, AMR-NB formats • 40 polyphonic and standard MIDI format 0 and 1 (SMF) / SP MIDI Supported Playback Formats • Windows Media® Player: MP3, MPEG-4, AAC, AAC+, eAAC+, WMA, WAV, AMR, AMR‑NB, AMR-WB, AWB, SP-MIDI • TouchFLO™ 3D: AMR-NB/WB, MP3, MPEG-4, WMA, AAC, AAC+, eAAC+ Controls Device Control • • • • • • • • Hardware Keyboard 5-row QWERTY keyboard TouchFLO™ 3D Touch-sensitive navigation control with ENTER
Appendix 295 A.2 Regulatory Notices Regulatory Agency Identifications For regulatory identification purposes, your product is assigned a model number of RAPH100. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your RAPH100. The Battery Pack has been assigned a model number of DIAM171. Note This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit.
Appendix • EN 301 489-24 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA direct spread (UTRA) for mobile and portable (UE) radio and ancillary equipment. • ETSI EN 301 511 Global system for mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands, covering essential requirements of article 3.
Appendix 297 • • EN 50360 / 50361 Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz ~ 3 GHz). EN 50392 Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz - 300 GHz) - General public.
Appendix Safety Precautions for RF Exposure Use only original manufacturer-approved accessories, or accessories that do not contain any metal. Use of non-original manufacturer-approved accessories may violate your local RF exposure guidelines and should be avoided. Exposure to Radio Frequency (RF) Signals Your device contains a radio transmitter and receiver. The radiated output power is far below the international radio frequency exposure limits.
Appendix 299 causing loss of performance and SAR levels exceeding the recommended limits as well as result in non-compliance with local regulatory requirements in your country. To assure optimal phone performance and ensure human exposure to RF energy is within the guidelines set forth in the relevant standards; always use your device only in its normal-use position. Do not touch or hold the antenna area unnecessarily when placing or receiving a phone call.
Appendix Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
Appendix 301 The WEEE logo (shown at the left) on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving natural resources.
Appendix
Index Symbols 3G 152 A A2DP 182 ActiveSync - about 227 - set up 106 - synchronize with computer 107 - synchronize with Exchange Server 136 Add and remove programs 230 Adobe Reader LE 227, 231 Airplane Mode 59, 240 Alarm 277 Album - about 205, 227 - close Album 210 - play back video 210 - select a photo or video to view 206 - view an image 206 Attachment - add to e-mail 129 - download 131 - set IMAP4 to automatically receive attachments 133 - set Outlook to automatically receive attachments 133 Audio Boost
Index - turn on and off 240 - visible 180 Bluetooth Explorer 227 C Calculator 227 Calendar - about 226 - create appointment 232 - send appointment 235 - view appointment 234 Call History 58 Calling - from Contacts 53 - from Home screen 54 - from Phone screen 53 Camera - about 194, 227 - Advanced Options 202 - capture modes 194 - controls 196 - file formats 195 - icons 196 - Menu Panel 198 - specifications 293 - zooming 199 Car kit phones 66 Clear Storage 287 Clock & Alarms 271, 274, 277 Comm Manager 2
Index 305 E E-mail - Internet e-mail account (POP3/ IMAP4) 124 - mail server settings 125 - Mail tab (Home screen) 75 - send 129 - settings (POP3/IMAP4) 126 - setup wizard 124 - synchronize 102, 132, 136 - types of e-mail accounts 122 EDGE 152 Emergency call 54 Emoticon - MMS 120 - Windows Live Messenger 169 Entering Information 88 - On-screen 88 - QWERTY keyboard 88 Equalizer 221 Excel Mobile 226, 243 Exchange Server 136 F Favorite contacts 72 File Explorer 227, 268 Find contact - Company Directory 144
Index Internet Sharing 170, 228 Internet tab (Home screen) 76 J Java - install MIDlets/MIDlet suites from device 247 - install MIDlets/MIDlet suites from Internet 247 - manage MIDlets/MIDlet suites 247 - update a MIDlet/MIDlet suite 248 JBlend 246 JETCET PRINT 228 L Letter Recognizer 98 Library - Music tab (Home screen) 80 - Windows Media Player Mobile 212 Live Messenger 167 M Mail tab (Home screen) 75 Meeting request 142, 235 Memory 46, 285, 292 Messages tab (Home screen) 74 Messaging - about 11
Index 307 P Panorama capture mode 195 Password 283 People tab (Home screen) 72 Phone 52, 226 Phone Keypad 93 Phone services 278 Photo capture mode 195 Photos and Videos tab (Home screen) 77 Pictures & Videos 228 Picture Theme capture mode 195 PIN 52, 283 Playlists - Music tab (Home screen) 80 - Windows Media Player Mobile 216 Play media 215 Play music - Music tab (Home screen) 78 - Windows Media Player Mobile 215 Podcasts 177 POP3 124 PowerPoint Mobile 226, 243 Programs 226 Programs tab (Home screen) 84
Index Settings (Connections tab) - Advanced Network 273 - Beam 273 - Bluetooth 273 - Connections 152, 153, 273 - Connection Setup 273, 278 - Domain Enroll 273 - USB to PC 108, 273 - Wi-Fi 151, 273 - Wireless LAN 150, 274 Settings (Personal tab) - Buttons 269 - Input 269 - Keyboard Sliding Sound 269 - Lock 270, 283 - Menus 270 - Owner Information 270 - Phone 270, 276, 278 - Sounds & Notifications 270, 277 - Today 270 Settings (System tab) - About 270, 276 - Certificates 270 - Clear Storage 270, 287 - Clo
Index 309 Streaming Media 163, 229 Swap/switch calls 56 Synchronize - ActiveSync 107 - change information types 108 - music and videos 110 - via Bluetooth 109 - Windows Media Player 213 - Windows Mobile Device Center 103 - with computer 84, 107 - with Exchange Server 84, 136 T T9 94 Task Manager 272, 280 Tasks 229, 257 Text messages - copy from SIM card 116 - copy to SIM card 115 - create new message 113 - Messages tab (Home screen) 74 - send 114 Text size (screen) 275 TouchFLO 3D 67 Transcriber 98 Troubl
Index - file formats 211 - menus 212 - playlists 216 - troubleshoot 216 Windows Mobile Device Center 103 Windows Update 272, 288 Word Mobile 226, 243 WorldCard Mobile 229, 262 Y YouTube 158, 229 Z ZIP - about 229, 265 - create archive 266 - open zip file and extract files 265 Zooming - Camera 199 - finger gestures 86
