Quick Start

Barcode
P/N
The Touch Diamond Phone
Battery
Extra Stylus
AC Adapter
USB Sync Cable
Multifunction Audio Cable
Read First Poster and Quick Start Guide
Getting Started Disc and VZ Access Manager CD
•
•
•
•
•
•
•
•
1
What’s in the Box
Top, Back, and Right View
2
Your Device
Left, Front, and Bottom View
POWER
Back Cover
3.2 Megapixel
Camera
Stylus
VOLUME UP
VOLUME DOWN
Sync Connector/
Earphone Jack
Microphone
Strap Holder
Speaker
Touch Screen
HOME
BACK
Navigation Control
TALK/SEND
END
Earpiece
3
Battery and Power
Charging the Battery
1. Connect the USB connector of the AC adapter to the sync connector on your
device.
2. Plug in the AC adapter to an electrical outlet to start charging the battery.
The battery is fully charged after about 3 hours of charging.
Installing the Battery
1. Make sure your device is turned o.
2. Hold the device with both hands and
the front panel facing down. Push the
back cover up with your thumb until it
disengages from the device and then
slide it up to remove.
3. Align the battery’s exposed copper
contacts with the battery connectors
inside the battery compartment. Insert
the contact’s side of the battery rst
and then gently push the battery into
place.
4. Replace the back cover.
Starting Up
After installing the battery and charging the battery, you can now power on and
start using your device.
1. Press and hold the POWER button for a few seconds.
2. A Quick Start Wizard guides you through the calibration of the screen and the
setup of regional settings, date and time, and password. Follow the onscreen
instructions to nish the Quick Start Wizard. After the Quick Start Wizard
nishes, the device installs customization settings, then restarts.
Sleep Mode
When the device is turned on, press and immediately release the POWER button to
turn off the display temporarily and switch your device to Sleep mode. Sleep mode
suspends your device to a low power state while the display is off in order to save
battery power.
Your device automatically goes into Sleep mode when you leave the device idle
after a certain period of time.
You will still be able to receive messages and calls while your device is in Sleep
mode. Pressing the POWER button again or incoming calls/messages will wake up
your device.
4
The Home Screen
TouchFLO™ 3D
The Home screen of the device is the TouchFLO™ 3D Home screen, which allows
finger-touch access to the most important functions such as contacts, text
messages, e-mail, Internet, and more.
Browser
EmailMessagingMy FavoritesHome
My Applications SettingsWeather
Music
Photos and
Videos
Switching between the Tabs
Press and hold your finger on the active tab, then slide your
finger right or left over the tabs. Release when you have
selected the desired tab.
You can also swipe left or right across the screen to go to the
next or previous tab.
Finger Gestures
You can use finger gestures to scroll, pan, and zoom on the touch screen of your
device.
Finger scrolling
You can easily scroll the
screen by simply sliding
your finger on the touch
screen.
Finger zooming
The type of finger gesture
to use when zooming
varies in different
programs:
To zoom in on a Web
page, tap your finger
twice on the screen.
To zoom in on a photo
in Album, make a full-
circle swipe on the
touch screen.
•
•
Finger panning
On the touch screen, drag
your finger in any direction
to move to other parts of a
zoomed photo, Web page,
document, or an e-mail.
Read First Poster