User's Manual

Camera and Multimedia 207
Resolution. Select the resolution to use.
Widescreen (Photo mode). When On (default) you can use the entire screen as
viewfinder. Refer to the zoom table for the resolution when Widescreen is On.
Touch Focus (Photo and Contacts Picture modes). Enables or disables the
Touch Focus function. Touch Focus is On by default.
Review Duration. Set the time for a captured photo/video to remain on the
Review screen.
Quality. Select the image quality level for captured photos.
Capture Format (Video and Video Messaging modes). Select the file
format for recorded videos.
Time Stamp (Photo mode). Include the date and time on captured photos.
Storage. Select where to save photos and videos. You can either save the files
to the main memory, or to a storage card if available.
Keep Backlight. Turn the backlight on or off. This overrides your phone
backlight settings while you are using the camera.
Shutter Sound. Play a shutter sound when you tap the Virtual Camera button.
Image Properties. Adjust the Contrast, Saturation, and Sharpness before
capturing.
Effect. Apply a special effect to your photos or videos.
Metering Mode. Select a metering mode to allow the camera to measure the
amount of light and calculate the best-fit exposure value before capturing.
Prefix. The file name of a newly captured photo or video is set to “IMAGE” or
“VIDEO” followed by a sequential number, for example: IMAGE_001.jpg. You
can also choose the current date or date and time as the file name prefix.
Note You can not change the file name prefix when saving captured photos to a
storage card. Captured photos are named using the convention IMAGnnnn.jpg
(where ‘nnnn’ is the counter), and are saved to the \DCIM\100MEDIA folder on
the storage card.
•
•
•
•
•
•
•
•
•
•
•
•
•
•