Foreword Dear Customer, Thank youforchoosingour range hood Please read the instruction manual carefully before using. lt introduces the range hood’s function, characters installation maintenance and ete Please keen this manual with purchase invoice carefully for checking in the future. (Pictures in the manual ave for reference only. Please refer fo the real product) J Ens Switches Sle Rating Collage | Rating Frequency Motor Power Light Power AGC220.
® Lease make sure the electricity supply system in your crosscurrent, voltage, connecting wires) can nest the regionalisms of tangs hood's normal supply (oad, B Please do nol Use high rapacity fuse in electrical circuit and tinsel the correct banes as required on rating label, ® \Wall strength The wall that the range hood is placed must be hard enough to bear the weight of range hood, ® Height ol mounting The sultanate height of mounting shall be 650-T50mm above the cooking stove The real installation heigh
pic = Take off the aluminum fillers. Marking the position of two Holes under the first two inserted screws: ® Take off the range hood. Drill two holes bn the markings: Insert the nuts into the holes: Hang up the range hood on the wall: Fix iL with safely Sorbet.
3. There are 2 methods for ventilation. ® Vertical ventilation: Sea Plea, please Use tool take oul the round cover before using and the alr can be vented from the top. B Horizontal ventilation: See Plc Bo please vse tool lake aul the square cover before using: and the air can be vented from the back: 4. The square air outlet fof horizontal ventilation is nol supplied. t 1 3.Confirmation of installation After installation, consent lo power supply and irritation the range hood.
Function Operation 1.Control Panel (subject to the real product) bo. tas Speed {ELL fray hail CHO Hse Rhee Hugh Baht 2. Function illustration ® On/Off bison: when the button is on; press it to trp oi the range hood: = Snead Button shift to low, medium and high speed.
B Power stipple must be tut off before changing lamps: New lamps must be the same specification as the current ones: ® Clean the oil on filter regularly.
