MSDS

MATERIAL SAFETY
DATA SHEET
REVISION DATE : 04/23/2012 Page 6 of 16
Land Release: Contact 1-800-654-6911 immediately. DANGER: All spills of this
product should be treated as contaminated. Contaminated product
may initiate a chemical reaction that may spontaneously ignite any
combustible material present, resulting in a fire of great intensity. In
case of a spill, separate all spilled product from packaging, debris
and other material. Using a clean broom or shovel, place all spilled
product into plastic bags, and place those bags into a clean, dry
disposal container, properly marked and labeled. Disposal
containers made of plastic or metal are recommended. Do not seal
disposal containers tightly. Immediately remove all product in
disposal containers to an isolated area outdoors. Place all damaged
packaging material in a disposal container of water to assure
decontamination (i.e. removal of all product) before disposal. Place
all undamaged packaging in a clean, dry container properly marked
and labeled. Call for disposal procedures.
Additional Spill Information : Hazardous concentrations in air may be found in local spill area and
immediately downwind. Remove all sources of ignition. Stop source
of spill as soon as possible and notify appropriate personnel.
Dispose of spill residues per guidelines under Section 13, Disposal
Consideration. This material may be neutralized for disposal; you
are requested to contact Arch Chemicals at 1-800-654-6911 before
beginning any such procedure. FOR ALL TRANSPORTATION
ACCIDENTS, CALL CHEMTREC: 1-800-424-9300 REPORTABLE
QUANTITY: 10 lbs. (as calcium hypochlorite) per 40 CFR 302.4.
7. HANDLING AND STORAGE
Handling: Avoid inhalation of dust and fumes. Do not take internally. Avoid
contact with skin, eyes and clothing. Upon contact with skin or eyes,
wash off with water. Remove contaminated clothing and wash
before reuse.
Storage: Keep product tightly sealed in original containers. Store product in a
cool, dry, well-ventilated area. Store away from combustible or
flammable products. Keep product packaging clean and free of all
contamination, including, e.g. other pool treatment products, acids,
organic materials, nitrogen-containing compounds, dry powder fire
extinguishers (containing mono-ammonium phosphate), oxidizers,
all corrosive liquids, flammable or combustible materials, etc.
Pending EPA Approval-Not Final