SDS

HTH Metal and Stain Defense
Ref. / 000000023317
SDS_US / EN
Page 5 (13)
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Electrical installations / working materials must comply with
the technological safety standards.
To maintain product quality, do not store in heat or direct sun-
light.
Further information on storage sta-
bility
:
No decomposition if stored and applied as directed.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
Engineering measures
:
Local exhaust ventilation is recommended if vapors, mists,
aerosols or dusts are generated. Otherwise, use general
exhaust ventilation.
Personal protective equipment
Respiratory protection
:
In the case of vapour formation use a respirator with an ap-
proved filter.
Respirator with ABEK filter.
Respirator with a vapour filter (EN 141)
Hand protection
Material
:
Nitrile rubber
Remarks
:
Wear impervious gloves to avoid skin contact.
Wear protective gloves. Break through time : > 480 min
Eye protection
:
Use chemical goggles and a faceshield.
Safety glasses with side-shields conforming to EN166
Wear face-shield and protective suit for abnormal processing
problems.
Skin and body protection
:
Impervious
Choose body protection according to the amount and con-
centration of the dangerous substance at the work place.
Impervious clothing
Protective measures
:
An eye wash and safety shower should be provided in the
immediate work area.
Hygiene measures
:
Avoid contact with skin, eyes and clothing.
When using do not eat or drink.
When using do not smoke.