User's Manual

Safety Instruction

Considerations

Please ensure that you have read and understood the safety precautions

described in the following text before using the product so that you can

operate it correctly.

The safety precautions described in the following text guides you to operate

the product and its accessories correctly and safely to avoid damage and

loss to you,other people and the device.

The warning describes the acts that may cause harm to users. Please

observe the following operation in order to avoid electric shock or personal

injury.

If the product case is damaged, don’t use it continuously.

Please contact the local distributors or agents of Xintai under such

condition.

Warning: Don’t aim the laser pointer at human or

animal's eyes. The laser given out by the laser

pointer may harm the vision.

Please observe the following guide in order not to damage the product:

Don’t assemble or dismantle the product without permission.

The product is a type of super precise equipment. Don’t try to dismantle,

assemble or remodel any part of the product. Repair of the product should

be made by technical personnel designated by Xintai Company.

Avoid damage to probe of the product

Note: don’t put the product close to strong heat source directly (such as

electric iron). Otherwise, it may damage the probe of the product.

Product hum

When the product works, there is light sound of clicking every several

seconds. This is normal phenomenon that the lens captures images.

Warning

During the process of use, if the product is found with smoke,

spark and the burnt smell, please stop using at once.

In case of such condition, the product power supply should be

powered off first.After the smoke and peculiar smell disappears

completely, please contact the local distributors or agents of Xintai.

Don’t remodel the adapter and the data line.

Otherwise, such remodeling may cause short circuit or fire.