Certifications
CERTIFICATE OF COMPLIANCE
Certificate Number
20140409-E333724
Report Reference
E333724-20100716
Issue Date
2014-APRIL-09
William R. Carney, Director, North American Certification Programs
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at www.ul.com/contactus
Page 1 of 1
Issued to:
HTP SRL
VIA LESINA 45
24030 BREMBATE DI SOPRA BG ITALY
This is to certify that
representative samples of
COMPONENT - CONNECTORS FOR USE IN DATA,
SIGNAL, CONTROL AND POWER APPLICATIONS
Component Connector, Series G1 & G2 and Header BG
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety:
UL 1977- Component Connectors for Use in Data, Signal,
Control and Power Applications
CAN/CSA C22.2 No. 182.3-M1987- Special Use
Attachment Plugs, Receptacles and Connectors
Additional Information:
See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Recognized Component Marks for the U.S. and Canada should be
considered as being covered by UL's Recognition and Follow-Up Service and meeting the appropriate U.S. and
Canadian requirements.
The UL Recognized Component Mark for the U.S. generally consists of the manufacturer’s identification and
catalog number, model number or other product designation as specified under “Marking” for the particular
Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that
have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark: , may
be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when
specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions. The
UL Recognized Component Mark for Canada consists of the UL Recognized Mark for Canada: and the
manufacturer’s identification and catalog number, model number or other product designation as specified under
“Marking” for the particular Recognition as published in the appropriate UL Directory.
Recognized components are incomplete in certain constructional features or restricted in performance
capabilities and are intended for use as components of complete equipment submitted for investigation rather
than for direct separate installation in the field. The final acceptance of the component is dependent upon its
installation and use in complete equipment submitted to UL LLC.
Look for the UL Recognized Component Mark on the product.