User Manual

5. Technical Parameters
Wireless Alarm Receiver
12
Technical parameters
Static Current 20mA; Alarming Current 300mA
Working Current
DC5V
433MHz FSK+FHSS
Technical Parameters
4 pieces AA 1.5V batteries(package is not included)
Working Voltage
Wireless Frequency
Backup Battery
Item
162mm
Step 2: Press and hold the ON/OFF button for 10 seconds
and release the button when you hear bleep prompt,and then
press the ON/OFF button 6 times quickly(
)
Note:if adjust the sensitivity of the beams back to factory
default 200ms ,press the ON OFF button 5 times
both the transmitter
and receiver
( ) /
Step 3: Make sure the solar beams aligned with each other
Step 4: Press and hold the ON/OFF button for 10 seconds
and release the button when you hear bleep prompt
(only the receiver)
Step 5: Press the ON/OFF button 4 times(only the receiver)
Step 6: Adjustment is successful when you heard 6 times
bleep prompt
52mm