Manualshelf

User Manual

ManualsBrandsHTZSAFE ManualsElectronicsSolar Wireless Driveway Alarm System- 1/4 Mile Long Transmission Range- 190 Feet Wide Sensor Range- No Wiring No Need Replace Battery- Outdoor Weatherproof DIY Security Perimeter Alert System
12345678910
Table Of Contents
● ON/OFF
Transmitter Receiver
4
Step 3
Make sure the beams aligned with each other
Step 4
and the wireless alarm receiver will alarm for 5seconds
(Completely block all the 2 infrared beams)
Trigger The Solar&Wireless Photoelectric Beam Sensor,
(the light of the Receiver's ON/OFF button will flash 3 times means
the beam sensor be triggered and send the alarm signal;and then
the solar beams will back to work mode automatically after
about 5 seconds)
(if work normally,the light of the Receiver's ON/OFF button will
go off after flashing about 10 seconds; and the light of the
Transmitter s ON/OFF button will go off after about 30 seconds )'
ON/OFF●
● ON/OFF
Transmitter Receiver
Step 5
Press“Tone” to choose the ring tone for this sensor, there are 35 tones
to choose from;
button
Tone