User Manual

Technical parameters
Static Current 20mA; Alarming Current 300mA
Working Current
DC5V
433MHz FSK+FHSS
Technical Parameters
4 pieces AA 1.5V batteries(package is not included)
Working Voltage
Wireless Frequency
Backup Battery
Item
5. Technical Parameters
162mm
52mm
Wireless Alarm Receiver
10
(4)How to change the ring tone for the sensors
Step 1
Power on the wireless alarm receiver by the power adapter
Step 2
Activate the sensor first,and then press the "Tone" button to
choose the ring tone for this sensor;
;
Same steps for other sensors which have been added to
the wireless alarm receiver already.(up to 32sensors can be
connected to 1 receiver;match different tones
with different sensors)
(5)How to adjust the sensitivity of the sensor
The sensor has 3 sensitivities adjustable (High, Middle, Low)
Step 1
turn off the sensor by press the ON/OFF button 3 times;
Step 2
If select Low sensitivity---turn on the sensor by pressing
the ON/OFF button 3 times
If select Middle sensitivity---turn on the sensor by pressing
the ON/OFF button 4 times
If select High sensitivity---turn on the sensor by pressing
the ON/OFF button 5 times