User Manual

4
(the light of the ON/OFF button will flash once
means the motion sensor was activated and sent
the alarm signal;and then the motion sensor will back
to work mode automatically after about 10 seconds
if not detecting any movements)
1 foot waya
Step 2
Turn on the Wireless Motion Sensor:
Press the ON/OFF button 4 times;
(bleep prompt means work normally)
ON/OFF
( )press 4 times
Step 3
Activate The Wireless Motion Sensor
(wait about 30 seconds after you turned on the sensor)
1st method:press the ON/OFF button twice
(the light of the ON/OFF button will flash once means
the motion sensor was activated and sent the alarm signal)
ON/OFF
( twice)press
2nd method: Ensure the sensor is turned away from you.
and walk through in front of the sensor to acivate