User Manual

8
4. Other Settings
(1)How to add sensors to the wireless alarm receiver
Step 1
Power on the wireless alarm receiver by the power adapter;
Step 2
Press and hold the “ON/OFF” button for 5 seconds and release
the button when the indicator light flashing;
ON/OFF
ON/OFF
light up
press and hold the ON/OFF
button for 5 seconds
flashing
release the button
Step 3
Activate the sensor(for example,activate the wireless
motion sensor)Note:please make the motion sensor
close to the Alarm receiver;
(a ring tone prompt and the
indicator light stops flashing
means the sensor has been
added to the wireless alarm
receiver successfully)
Step 4
Activate the sensor again to confirm the sensor has been
added to the wireless alarm receiver already;
stop flashing
ON/OFF
(the light of the ON/OFF
button will flash once means
the sensor was activated and
sent the alarm signal)
(press twice)
(up to 32 sensors can be added to the receiver)