User's Manual

3
(the light of the ON/OFF button will flash once means
the motion sensor was activated and sent the alarm signal;
and then the motion sensor will back to work mode automatically
after about 10 seconds if not detecting any movements)
1 foot waya
Step 2
Activate The Wireless Motion Sensor
(wait about 30 seconds after you turned on the sensor)
1st meth od:press the ON/OFF button twice
(the light of the ON/OFF button will flash once means
the motion sensor was activated and sent the alarm signal)
ON/OFF
( twice)press
2nd meth od: Ensure the sensor is turned away from you.and walk through
in front of the sensor to acivate