User's Manual

3
Step 2
Trigger The Wireless Radar Sensor
1st meth od: press the ON/OFF button twice
ON/OFF
(the light of the ON/OFF button will flash once means
the radar sensor was triggered and sent the alarm signal)
(press )twice
(bleep prompt means work normally)
ON/OFF
( )press 3 times
2nd meth od: stay still for 10 seconds,and then wave your hands
in front of the sensor to activate
(the light of the ON/OFF button will flash once means
the radar sensor was triggered and sent the alarm signal;
and then the radar sensor will back to work mode automatically
after about 10 seconds if not detecting any movements)
1 foot waya
Note: within 30 minutes after turning on the sensor, the sensor has bleep
prompt to let you know whether it is ready to be triggered:
if the sensor is not ready to be triggered,there is a bleep prompt every 2 seconds;
if the sensor is ready to be triggered,there is no bleep prompt;