User's Manual

MB5601L Module User's manual
Hua shu Communication (Shenzhen) Company
15
serial
number
Function Description
AT command format
parameter
11
Scan all BLE devices
AT+SCAN=<Param>
Param: mode
0---stop scanning
1---start scanning
12
Connect to the specified
bluetooth device
AT+CONN=<Param>
Param: Mode
slave MAC address plus address
type Address type:
0---local address
1---random address
13
Query the status of the
connected device,
AT+CHINFO
Param: Mode
slave MAC address plus address
type
Address type:
0---local address
1---random address
14
Send data to the specified
bluetooth channel
AT+LESEND=<Param1>,
<Param2>,<Param3>
Param1: channel number;
Param2: sent data length
Param3: sent data content
15
The serial port receives the
data received by the
bluetooth air port
AT+DATA=<Param1>,
<Param2>,< Param3>
Param1: Channel number
Param2: Received data length
Param3: Received data content
16
Disconnect the specified
bluetooth channel
AT+LEDISC=<Param1>
Param1:
single connection:
channel number (0)
17
Turn on/off NTF
notifications
AT+NTF=<Param1>,
<Param2>,< Param3>
Param1: channel number;
Param2: event
Param3: switch 0/1
18
Turn on/off IND notification
AT+IND=<Param1>,
<Param2>,< Param3>
Param1: channel number;
Param2: event
Param3: switch 0/1
19
Broadcast on and off
AT+ADV=<Param1>
Param1: switch 0/1
20
Send NTF data
AT+THROUGHPUT=<Param1>
Param1: NTF data
end notice
AT+THROUGHPUT
none
21
Find
AT+DISCOVERY=<Param1>,
<Param2>
Param1: channel number;
Param2: found type
0--all,
1--svc,
2--char,
3--desc,
used after successful connection