Installation Instructions

Table 2-2 ODM specifications
Item Specifications
Dimensions (H x W x
D)
232 mm x 158 mm x 96.5 mm (9.13 in. x 6.22 in. x 3.80 in.)
Upper-level circuit
breaker
20 A
Support power 1650 W
Power supply
capacity
One AC power input and four AC power outputs (Each power output
is less than or equal to 400 W.)
Fiber division
capacity
One trunk fiber optic cable and three pairs of breakout fiber optic
cables (six breakout fiber optic cables)
Cable specifications
l Cross-sectional area of an input power cable: 1.5 mm
2
to 4 mm
2
(0.002 in.
2
to 0.006 in.
2
). External diameter of an input power
cable: 8.3 mm to 15mm (0.33 in. to 0.59 in.)
l Cross-sectional area of an output power cable: 1.5 mm
2
to 2.5
mm
2
(0.002 in.
2
to 0.004 in.
2
). External diameter of an output
power cable: 8.3 mm to 13.5 mm (0.33 in. to 0.53 in.)
l External diameter of an input fiber optic cable: 9.8 mm to 11 mm
(0.39 in. to 0.43 in.)
l External diameter of an output fiber optic cable: 7.0 mm (0.28 in.)
Mounting Kits
The following figure shows the mounting kits for an ODM.
AAU3940
Installation Guide 2 Overview
Issue 01 (2015-01-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14