Installation Instructions
Table Of Contents
- About This Document
- Contents
- 1 Changes in AAU3940 Installation Guide
- 2 Overview
- 3 Installation Preparations
- 4 Unpacking Check
- 5 Installation Process
- 6 (Optional) Installing an ODM
- 7 Preprocessing the AAU Maintenance Cavity
- 8 Lifting an AAU
- 9 Installing an AAU
- 10 Installing AAU Cables
- 11 Closing a Maintenance Cavity
- 12 (Optional) Installing a Cord Cover for an ODM
- 13 Adjusting the Horizontal Azimuth of an Antenna
- 14 Installation Checklist
- 15 Powering on an AAU
- 16 Appendix
3.1 Documents
This section lists the documents that must be obtained before the installation.
l Before the installation, familiarize yourself with related information in the following
documents:
– AAU3940 Hardware Description
– Safety Information
l During the installation, refer to the following document:
– Installation Reference
3.2 Tools and Instruments
You must prepare the following tools and instruments before the installation.
Heat gun
Phillips screwdriver (M3 to
M6)
Flat-head screwdriver (M3 to
M6)
ESD gloves Needle-nose pliers Wire stripper
Utility knife Cable cutter
Adjustable wrench (size ≥ 32
mm or 1.26 in.)
Torque wrench
Size: 16 mm (0.63 in.) and 32
mm (1.26 in.)
Combination wrench
Size: 16 mm (0.63 in.) and 32
mm (1.26 in.)
AAU3940
Installation Guide 3 Installation Preparations
Issue 01 (2015-01-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18