Installation Instructions
Table Of Contents
- About This Document
- Contents
- 1 Changes in AAU3940 Installation Guide
- 2 Overview
- 3 Installation Preparations
- 4 Unpacking Check
- 5 Installation Process
- 6 (Optional) Installing an ODM
- 7 Preprocessing the AAU Maintenance Cavity
- 8 Lifting an AAU
- 9 Installing an AAU
- 10 Installing AAU Cables
- 11 Closing a Maintenance Cavity
- 12 (Optional) Installing a Cord Cover for an ODM
- 13 Adjusting the Horizontal Azimuth of an Antenna
- 14 Installation Checklist
- 15 Powering on an AAU
- 16 Appendix
About This Document
Overview
This document describes procedures for installing an active antenna unit 3940 (AAU3940, which
is shortened to AAU in this document) and its cables. It also provides the checklists for hardware
installation.
Product Version
The following table lists the product versions related to this document.
Product Name Solution Version Product Version
DBS3900
l SRAN9.0 and later
l RAN16.0 and later
l eRAN7.0 and later
V100R009C00 and later
Intended Audience
l System engineers
l Installation personnel
l Maintenance engineers
Organization
1 Changes in AAU3940 Installation Guide
This section describes changes in AAU3940 Installation Guide.
2 Overview
Before installing an AAU, you must be familiar with its installation options and installation
clearance requirements.
3 Installation Preparations
AAU3940
Installation Guide
About This Document
Issue 01 (2015-01-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii