Installation Instructions
Table Of Contents
- About This Document
- Contents
- 1 Changes in AAU3940 Installation Guide
- 2 Overview
- 3 Installation Preparations
- 4 Unpacking Check
- 5 Installation Process
- 6 (Optional) Installing an ODM
- 7 Preprocessing the AAU Maintenance Cavity
- 8 Lifting an AAU
- 9 Installing an AAU
- 10 Installing AAU Cables
- 11 Closing a Maintenance Cavity
- 12 (Optional) Installing a Cord Cover for an ODM
- 13 Adjusting the Horizontal Azimuth of an Antenna
- 14 Installation Checklist
- 15 Powering on an AAU
- 16 Appendix
4 Unpacking Check
Unpack and check the delivered equipment to ensure that all materials are included and intact.
Context
NOTE
When transporting, moving, or installing equipment or components,
l Prevent them from colliding with doors, walls, shelves, or other objects.
l Avoid touching their unpainted metal surfaces with sweat-soaked or dirty gloves or bare hands.
NOTICE
Power on an AAU within 24 hours after unpacking it.
Procedure
Step 1 Check the total number of articles in each case according to the packing list.
If... Then...
The total number tallies with the packing
list
Go to 2.
The total number does not tally with the
packing list
Find out the cause and report any missing
articles to the local Huawei office.
Step 2 Check the exterior of the packing case.
If... Then...
The outer packing case is intact Go to Step 3.
AAU3940
Installation Guide 4 Unpacking Check
Issue 01 (2015-01-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
21