Installation Instructions

Table Of Contents

This chapter lists the tools and instruments that must be obtained before the installation. It also

specifies the skills that the onsite personnel must have.

4 Unpacking Check

Unpack and check the delivered equipment to ensure that all materials are included and intact.

5 Installation Process

This chapter describes the process of installing an AAU.

6 (Optional) Installing an ODM

This section describes the procedure and precautions for installing an ODM.

7 Preprocessing the AAU Maintenance Cavity

Before installing an AAU, take power terminals out of its maintenance cavity and install optical

modules.

8 Lifting an AAU

Before installing an AAU on a pole, you need to lift the AAU to the installation position on the

pole.

9 Installing an AAU

This chapter describes the procedures for installing an AAU in different scenarios.

10 Installing AAU Cables

This section describes the procedure and precautions for installing AAU cables.

11 Closing a Maintenance Cavity

After all installation procedures are complete, you need to close the AAU maintenance cavity.

12 (Optional) Installing a Cord Cover for an ODM

This section describes a procedure for installing a cord cover for an ODM after all cables are

installed.

13 Adjusting the Horizontal Azimuth of an Antenna

This section describes the procedure for adjusting the horizontal azimuth of an antenna based

on coverage requirements after all cables are installed.

14 Installation Checklist

This section describes the checklist for AAU hardware installation.

15 Powering on an AAU

This section describes the procedure and precautions for powering on an AAU.

16 Appendix

This chapter describes auxiliary operations during an AAU installation process.

Conventions

Symbol Conventions

AAU3940

Installation Guide

About This Document

Issue 01 (2015-01-15) Huawei Proprietary and Confidential

iii