Installation Instructions

Table Of Contents

9.1 Installing an AAU on a Pole

This section describes the procedure and precautions for installing an AAU on a pole.

Prerequisites

l You have preprocessed the AAU maintenance cavity. For detailed operations, see 7

Preprocessing the AAU Maintenance Cavity.

l You have lifted the AAU and mounting kits to the installation position on the pole. For

detailed operations, see 8 Lifting an AAU.

Context

NOTICE

Do not work at heights when you meet any of the following situations:

l Thunder, lightning, rain, or wind greater than force 6 occurs.

l Water remains on the surface of the steel tube.

l There may be other danger.

After the above situations are eliminated, the Huawei security director and related technical

personnel must check all devices to be used before work start.

Procedure

Step 1 Determine a position for installing the mounting kits on a pole.

Step 2 Attach the mounting kits to the installation position on the pole, wind each steel belt round the

pole for one circle, and put the steel belt through the sliding block of the mounting kits, as shown

in the following figure.

AAU3940

Installation Guide 9 Installing an AAU

Issue 01 (2015-01-15) Huawei Proprietary and Confidential